Siemens 6ES7120-0AH01-0AA0 Smart Connect TB16SC Screw Terminal Block
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Use the SC electronic modules permitted for the TB16SC base and its eight slots.
- Connect a TB16IM-SC when using the specified counter or high-speed analog modules.
- Add supplementary terminals for the required three- or four-wire field connections.
- Provide a local ground conductor of at least 4 mm² and maximum 0.5 m length to the grounded rail.
- Observe the 8 A supply-path and 1.5 A parallel-fed per-slot limits, and connect only one phase to a terminal block.
6ES7120-0AH01-0AA0 Smart Connect TB16SC Screw Terminal Block
An eight-slot Smart Connect terminal block with screw terminals, 8 A supply-path capacity and up to 1.5 A per slot with parallel feeding.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7120-0AH01-0AA0 |
| Product Type | TB16SC terminal base |
| Core Function | Carries field wiring for SC electronics |
| Application | ET 200L-SC Smart Connect expansion |
Eight module slots
The base accommodates matching analog and digital SC electronic modules.
Screw-terminal wiring
Field wiring can be completed before the electronic modules are fitted.
Expandable connections
Supplementary terminals extend the two-wire arrangement to three- or four-wire field connections.
Product Overview
6ES7120-0AH01-0AA0 is the screw-terminal TB16SC base for Smart Connect analog and digital electronic modules in an ET 200L-SC expansion arrangement.
The base provides eight single-width slots and carries the field wiring independently of the plug-in electronics, with local grounding and a separate terminal arrangement for the supply feed and loop-through path.
Key Functions
Prewired expansion base
The terminal block can be wired before the electronic modules are inserted, and the labeling-strip position identifies the assignment of modules to slots.
Field-connection expansion
Two-wire field connections are provided at the base, with supplementary terminals available for three-wire and four-wire arrangements.
Supply distribution through the base
The 1L+/1M and 2L+/2M terminal arrangement provides supply feeding and loop-through, with 8 A supply-path and 1.5 A parallel-fed per-slot current limits.
Official Specifications
| Field Terminal Technology | Screw terminals |
|---|---|
| Single-width Module Slots | 8 |
| Supply-path Current Capacity | 8 A maximum via 1L+ and 2L+ |
| Parallel-fed Slot Current Capacity | 1.5 A maximum per slot |
| Electronic-module Insertion Endurance | Up to 20 insertions per slot |
| Slot-to-slot Insulation Test | 4,000 V DC |
| Dimensions (W × H × D) | 145 × 100 × 40.5 mm |
| Approximate Weight | 230 g |
Frequently Asked Questions
Can I complete the wiring of 6ES7120-0AH01-0AA0 before fitting the electronic modules?
The terminal base can be prewired before the electronic modules are plugged in.
How do I obtain three-wire or four-wire connections with 6ES7120-0AH01-0AA0?
Add the appropriate supplementary terminals to expand the base two-wire connection arrangement.
Which supply terminals on 6ES7120-0AH01-0AA0 provide the loop-through path?
Terminals 2L+ and 2M provide the loop-through connection for the 1L+ and 1M load supply.
Can 6ES7120-0AH01-0AA0 be operated without a local ground connection?
The terminal base requires a low-resistance local grounding connection and must not be installed ungrounded.
How should the local ground of 6ES7120-0AH01-0AA0 be connected to the rail?
Use a conductor of at least 4 mm² and no more than 0.5 m in length to connect the local ground point to the grounded rail.
Can counter and high-speed analog SC modules be used on 6ES7120-0AH01-0AA0 by itself?
Those module types require the TB16SC to be connected to a TB16IM-SC.
Can I connect different phases of a three-phase system to 6ES7120-0AH01-0AA0?
Only one phase may be connected to each terminal block.