Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6ep4346 7rb00 0ax0 sitop red1200 redundancy module-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens 6EP4346-7RB00-0AX0 SITOP RED1200 Redundancy Module

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
SITOP RED1200

6EP4346-7RB00-0AX0 SITOP RED1200 Redundancy Module

Compact redundancy module for two supplies up to 10 A each, with a 20 A output and a 12–48 V DC nominal system range.

At a Glance

Brand Siemens
Model 6EP4346-7RB00-0AX0
Product Type DC supply redundancy module
Core Function Decoupling of parallel DC power supplies
Application Redundant industrial DC supply systems

Dual-source decoupling

Two power-supply inputs, each rated for up to 10 A, feed one common DC output through the redundancy module.

Broad DC operating range

The 10–58 V input operating range covers nominal DC supply systems from 12 to 48 V.

Tool-friendly cabinet wiring

Push-in power terminals and a narrow DIN-rail body support compact redundant power assemblies.

Product Overview

6EP4346-7RB00-0AX0 decouples two DC supply inputs so that a redundant power arrangement can feed a common load without coupling the source outputs directly together.

The RED1200 handles a nominal 12–48 V DC system with up to 20 A at the output and uses push-in terminals in a 35 mm wide DIN-rail housing.

Ordering focus: Match both DC supplies to the load voltage and current, allow approximately 0.6 V across the decoupling module and retain the specified ventilation space.
Key Functions

Dual-source decoupling

Two power-supply inputs, each rated for up to 10 A, feed one common DC output through the redundancy module.

Broad DC operating range

The 10–58 V input operating range covers nominal DC supply systems from 12 to 48 V.

Tool-friendly cabinet wiring

Push-in power terminals and a narrow DIN-rail body support compact redundant power assemblies.

Official Specifications
Nominal DC system range 12–48 V DC
Operating input voltage 10–58 V DC
Input and output currents Two inputs up to 10 A each; output up to 20 A
Typical output voltage drop Approximately 0.6 V below input
Output voltage adjustment Nonadjustable
Typical efficiency 97.5%
Full-load power loss 12 W typical at 24 V / 20 A
No-load power loss 0.1 W maximum
Electrical construction No input/output isolation; protection class III
Operating ambient −40 to +70°C with natural convection
Storage and transport ambient −40 to +85°C
Relative humidity 5–95%, noncondensing
Input and output terminals Push-in connections for 0.2–10 mm² conductors
Degree of protection IP20
Dimensions and weight 35 × 135 × 125 mm (W × H × D); 0.47 kg
Required installation height 225 mm, including 45 mm clearance above and below
Side clearance 0 mm
Mounting rail 35 × 7.5 mm or 35 × 15 mm DIN rail to EN 60715
Frequently Asked Questions

Can 6EP4346-7RB00-0AX0 connect two 10 A supplies to a common load?

The module accepts two inputs rated up to 10 A each and provides a common output rated up to 20 A.

How much voltage should I allow for 6EP4346-7RB00-0AX0 in a 24 V system?

Allow approximately 0.6 V of voltage drop between the input supply and the load output.

Will 6EP4346-7RB00-0AX0 maintain the load during a loss of both supplies?

The redundancy module decouples the supplies but does not provide energy storage for hold-up during a loss of both sources.

Can I adjust the output voltage on 6EP4346-7RB00-0AX0?

The output is nonadjustable and follows the input voltage minus the module voltage drop.

How much vertical ventilation space does 6EP4346-7RB00-0AX0 need?

Allow 45 mm above and 45 mm below the 135 mm housing for a total installation height of 225 mm.

Which wire sizes fit the power terminals of 6EP4346-7RB00-0AX0?

The push-in input and output terminals accept conductors from 0.2 to 10 mm².

Can 6EP4346-7RB00-0AX0 be used directly on an AC supply?

The module operates with DC inputs from 10 to 58 V and requires external DC power supplies.

Compatibility & Ordering Notes
Before ordering 6EP4346-7RB00-0AX0: Match both DC supplies to the load voltage and current, allow approximately 0.6 V across the decoupling module and retain the specified ventilation space.

Before installation

  • Provide two suitable DC supplies and size the load so the redundant supply arrangement meets the required operating condition.
  • Allow for the approximately 0.6 V module drop when setting the supply voltage.
  • Mount on a 35 mm DIN rail with 45 mm ventilation clearance above and below the module.
  • Keep the connected circuits within the 10–58 V DC input range and the 20 A output limit.
Hot Selling Models
17-OE- 24DC/ 24DC/ 50
S1FL66
REV014
OGE300 OGE-DPKG/US100
STREL4KG
EL1034
NF048-503 FS21226-42-33
070175
CPE10-M1CH-30L-M7
Allen-Bradley 1734-OW2
P31013
15C1 401833
08187843
US6J3I M211381
VN-10-H-T4-PQ2-VA5-RO2

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.