Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6ep1331 5ba10 sitop psu100c 24 v 1 3 a power supply-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens 6EP1331-5BA10 SITOP PSU100C 24 V 1.3 A Power Supply

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
SIEMENS SITOP PSU100C

6EP1331-5BA10 SITOP PSU100C 24 V 1.3 A Power Supply

A 30 mm-wide PSU100C providing regulated 24 V DC at 1.3 A from a wide-range AC or DC input.

At a Glance

Brand Siemens
Model 6EP1331-5BA10
Product Type Stabilized DC power supply
Core Function Isolated control-voltage conversion
Application Compact industrial control panels

Small installation width

The enclosure occupies 30 mm on the DIN rail.

Load-temperature planning

The output remains rated at 1.3 A up to 60 °C and is reduced to 1.2 A at 70 °C.

Output supervision

A green LED indicates that the output voltage is OK.

Product Overview

6EP1331-5BA10 provides a regulated 24 V DC supply for compact control circuits, with a nominal output current of 1.3 A and a typical delivered power of 30 W.

The PSU100C accepts single-phase AC or DC input and uses natural convection; its output adjustment, short-circuit shutdown and restart behavior support a defined low-power control-supply arrangement.

Ordering focus: Use the 1.3 A version for the actual load budget and keep the required vertical ventilation space despite the narrow housing.
Key Functions

Convert a wide-range source

The supply accepts 85–264 V AC or 110–300 V DC and produces an isolated, regulated output.

Trim the control voltage

The front potentiometer adjusts the nominal 24 V output between 22.2 and 26.4 V.

Recover from output faults

Electronic shutdown protects the output during a short circuit and permits automatic restart.

Official Specifications
AC Input Range 85–264 V AC, single phase
DC Input Range 110–300 V DC
Input Frequency 47–63 Hz
Rated Output 24 V DC, 1.3 A; 30 W typical delivered power
Output Adjustment 22.2–26.4 V
Overall Voltage Tolerance 3%
Output Residual Ripple 200 mV maximum; 25 mV typical
Minimum Mains Buffering 20 ms at 230 V input and rated output current
Input Current 0.63 A at 100 V; 0.31 A at 230 V
Maximum Inrush Current 34 A at 25 °C
Typical Efficiency and Rated-Load Loss 86%; 4.5 W
Maximum Turn-On Delay 0.6 s; typical voltage rise time 90 ms
Typical Output Current Limit 1.4 A
Short-Circuit Response Electronic shutdown with automatic restart
Output Safety and Protection Class Isolated SELV output; Class I
Enclosure Protection IP20
Operating Temperature and Derating −20 to +70 °C; above +60 °C derate by 0.8% per kelvin; 1.2 A at +70 °C
Required Ventilation Clearance 50 mm above and below; 0 mm at either side
Electrical Terminations Screw terminals for 0.5–2.5 mm² conductors
Dimensions and Net Weight 30 × 80 × 100 mm (W × H × D); 0.17 kg
Frequently Asked Questions

Will 6EP1331-5BA10 fit into a 30 mm-wide rail position?

The enclosure width is 30 mm.

Can I keep the housing of 6EP1331-5BA10 directly beside another compatible supply?

The specified lateral clearance is zero, while 50 mm remains required above and below.

At what temperature must I start reducing the load on 6EP1331-5BA10?

Output-current derating starts above 60 °C at 0.8% per kelvin.

What does the green LED on 6EP1331-5BA10 indicate?

The green indicator shows that the output voltage is OK.

Does 6EP1331-5BA10 require a protective-earth connection?

The power supply is Class I equipment and has an input PE terminal.

Can 6EP1331-5BA10 bridge a short interruption at a 230 V input?

The minimum mains buffering time at 230 V and rated output current is 20 ms.

How should a parallel arrangement of 6EP1331-5BA10 be started?

Up to two supplies may be paralleled for increased power, with startup limited to a single nominal load.

Compatibility & Ordering Notes
Before ordering 6EP1331-5BA10: Match the input source and 1.3 A DC load, provide Class I protective earth and allow the specified convection clearances.

Compatibility Checklist for 6EP1331-5BA10

  • Use the 85–264 V AC or 110–300 V DC input range.
  • Mount on EN 60715 35 × 7.5 mm or 35 × 15 mm DIN rail.
  • Keep 50 mm clear above and below the supply.
  • Reduce the output load above 60 °C.
  • Use the recommended feeder breaker from 16 A characteristic B or 10 A characteristic C.
Hot Selling Models
2.1-20 512120
P1778B078002
CPU-928B 6ES5928-3UB21
2K1-14 8021.312
15252979 EYD0017A0025W03S02
0853190SR
3RT1045-1AP00 3RH1921-1DA11
EVZ5323-5M0Z-01F-Q
BMV5 BMV5.0 13000063
KWD-015-FKS-C0-H-1
MLV40-54/48 9.428000
170M6811 700A 660V 970606
WT36-P710 1006 047
E84AVBDE3714SX0
GD4500 GD4590-BK

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.