EN
Siemens SIMOVERT D and S 6DD2920-3AW1 TAS21E Thyristor Electronics
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
Siemens • SIMOVERT D AND S · TAS21E
6DD2920-3AW1 SIMOVERT D and S TAS21E Thyristor Electronics
Siemens 6DD2920-3AW1 is TAS21E thyristor electronics for water-cooled SIMOVERT D and SIMOVERT S converter systems, identified by the 4.00 kV / 2.80 kV voltage designation.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6DD2920-3AW1 |
| Product Type | Thyristor electronics module |
| Core Function | Controls the converter power-section thyristors |
| Application or Compatible Series | Water-cooled SIMOVERT D and SIMOVERT S drive systems |
Exact Identification
Match 6DD2920-3AW1 character by character and confirm the complete SIMOVERT D and S TAS21E Thyristor Electronics designation.
Interface Arrangement
Confirm the installed supply, ports, field connections and required accessories before wiring the replacement.
Configuration Check
Preserve the approved engineering project, network parameters and application data used by the installed system.
Product Overview
Siemens 6DD2920-3AW1 is TAS21E thyristor electronics for water-cooled SIMOVERT D and SIMOVERT S converter systems, identified by the 4.00 kV / 2.80 kV voltage designation.
The module provides the designated thyristor-electronics function for the converter power section. This order code is intended for water-cooled SIMOVERT D and SIMOVERT S installations. The 4.00 kV / 2.80 kV designation must match the installed converter execution.
Key Functions
TAS21E Thyristor Control
The module provides the designated thyristor-electronics function for the converter power section.
Water-Cooled Drive Execution
This order code is intended for water-cooled SIMOVERT D and SIMOVERT S installations.
Voltage-Specific Selection
The 4.00 kV / 2.80 kV designation must match the installed converter execution.
Official Specifications
| Product Category | Thyristor electronics |
|---|---|
| Module Designation | TAS21E |
| Voltage Designation | 4.00 kV / 2.80 kV |
| High-Voltage Rating | 4.00 kV |
| Low-Voltage Rating | 2.80 kV |
| Cooling Medium | Water |
| Converter Family 1 | SIMOVERT D |
| Converter Family 2 | SIMOVERT S |
| Siemens Equipment Identifier | 460792900971 |
| Variant Execution | 3AW1 water-cooled voltage variant |
Frequently Asked Questions
Which converter families are compatible with 6DD2920-3AW1?
The module is intended for water-cooled SIMOVERT D and SIMOVERT S converter systems.
What voltage execution must match 6DD2920-3AW1?
The installed converter must match the 4.00 kV / 2.80 kV voltage designation.
Is 6DD2920-3AW1 intended for an air-cooled cabinet?
No, this execution is intended for a water-cooled converter installation.
What control role does 6DD2920-3AW1 perform?
It provides the designated thyristor-electronics function for the converter power section.
Which module designation should be checked for 6DD2920-3AW1?
Confirm the TAS21E designation before selecting the replacement.
What should an engineer verify before replacing 6DD2920-3AW1?
Verify the complete order code, voltage execution, water-cooling arrangement and installed converter family before replacement.
Can 6DD2920-3AW1 be selected only by the 6DD2920 family number?
No, the full suffix must be matched because the order code identifies the required converter execution.
Compatibility & Ordering Notes
Compatibility Checklist
- Match the full 6DD2920-3AW1 article number rather than selecting by the 6DD2920 family alone.
- Confirm that the installed converter is the water-cooled SIMOVERT D or SIMOVERT S execution.
- Verify that the installed voltage execution corresponds to the 4.00 kV / 2.80 kV designation.
