EN
Siemens SIMATIC HMI OP7/DP Operator Panel 6AV3607-1JC20-0AX2
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
SIEMENS · SIMATIC HMI
6AV3607-1JC20-0AX2 SIMATIC HMI OP7/DP Operator Panel
The OP7/DP is a compact SIMATIC operator panel with a four-line LED-backlit LC display, twenty characters per line and PROFIBUS DP communication at up to 1.5 Mbit/s.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6AV3607-1JC20-0AX2 |
| Product Type | text-based operator panel |
| Core Function | Provides local operation and status display over PROFIBUS DP |
| Application or Compatible Series | Legacy SIMATIC S7 and M7 automation systems using OP7/DP panels |
Exact Identification
Match 6AV3607-1JC20-0AX2 character by character and confirm the complete SIMATIC HMI OP7/DP Operator Panel designation.
Interface Arrangement
Confirm the installed supply, ports, field connections and required accessories before wiring the replacement.
Configuration Check
Preserve the approved engineering project, network parameters and application data used by the installed system.
Product Overview
The OP7/DP is a compact SIMATIC operator panel with a four-line LED-backlit LC display, twenty characters per line and PROFIBUS DP communication at up to 1.5 Mbit/s.
The LED-backlit liquid-crystal display presents four lines with twenty characters on each line. The panel communicates with supported SIMATIC S7 and M7 systems over PROFIBUS DP at up to 1.5 Mbit/s. The spare-part configuration carries UL and CSA approvals for supported installations.
Key Functions
Compact Text Display
The LED-backlit liquid-crystal display presents four lines with twenty characters on each line.
PROFIBUS DP Connection
The panel communicates with supported SIMATIC S7 and M7 systems over PROFIBUS DP at up to 1.5 Mbit/s.
Approved Legacy HMI Hardware
The spare-part configuration carries UL and CSA approvals for supported installations.
Official Specifications
| Display Type | Liquid-crystal display |
|---|---|
| Backlighting | LED |
| Display Lines | 4 |
| Characters per Line | 20 |
| Operator Panel Version | OP7/DP |
| Automation-System Support | SIMATIC S7 |
| Computer-System Support | SIMATIC M7 |
| Communication Network | PROFIBUS DP |
| Maximum Bus Rate | 1.5 Mbit/s |
| UL Approval | Yes |
| CSA Approval | Yes |
| Net Weight | 0.498 kg |
Frequently Asked Questions
How much text can 6AV3607-1JC20-0AX2 show at one time?
The display provides four lines with twenty characters on each line.
Which controller families can communicate with 6AV3607-1JC20-0AX2?
It is intended for supported SIMATIC S7 and M7 automation systems.
What fieldbus connection does 6AV3607-1JC20-0AX2 require?
Use a PROFIBUS DP connection configured for a rate no higher than 1.5 Mbit/s.
Is the display on 6AV3607-1JC20-0AX2 illuminated?
Yes; the liquid-crystal display uses LED backlighting.
Which approval marks apply to 6AV3607-1JC20-0AX2?
The listed spare-part configuration has UL and CSA approvals.
Can a graphical touch project be transferred directly to 6AV3607-1JC20-0AX2?
No; this is a text-oriented OP7/DP panel, so the existing project type and key layout must match.
What should be backed up before exchanging 6AV3607-1JC20-0AX2?
Save the HMI project, message texts, recipes, PROFIBUS address and controller connection settings.
Compatibility & Ordering Notes
Compatibility Checklist
- Confirm that the installed project targets an OP7/DP rather than a different OP7 interface version.
- Keep the PROFIBUS DP rate at or below the supported 1.5 Mbit/s value.
- Back up all HMI project data and communication parameters before removing the panel.
