Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 3rb3016 1tb0 sirius 4 16 a electronic overload relay-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens 3RB3016-1TB0 SIRIUS 4–16 A Electronic Overload Relay

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
SIRIUS 3RB3

3RB3016-1TB0 SIRIUS 4–16 A Electronic Overload Relay

A Class 10E electronic relay with a 4–16 A adjustment range, screw terminals and selectable manual or automatic reset.

At a Glance

Brand Siemens
Model 3RB3016-1TB0
Product Type Electronic overload relay
Core Function Monitoring motor overload current
Application Size S00 motor starter protection

Adjust overload protection

The electronic release uses Class 10E tripping with a 4–16 A current setting.

Coordinate trip and indication

One NC auxiliary contact disconnects the contactor and one NO contact provides tripped indication.

Fit the starter assembly

The S00 relay mounts on a contactor and provides screw connections with removable auxiliary/control terminals.

Product Overview

3RB3016-1TB0 provides three-pole current-dependent overload protection in a compact size S00 starter assembly.

The relay mounts on a compatible contactor and separates the contactor-disconnection signal from the auxiliary indication of a tripped condition.

Ordering focus: Set the response within the 4–16 A motor-current range and select the required reset mode.
Key Functions

Adjust overload protection

The electronic release uses Class 10E tripping with a 4–16 A current setting.

Coordinate trip and indication

One NC auxiliary contact disconnects the contactor and one NO contact provides tripped indication.

Fit the starter assembly

The S00 relay mounts on a contactor and provides screw connections with removable auxiliary/control terminals.

Official Specifications
Current Adjustment 4–16 A
Trip Characteristic Class 10E electronic release
Main Circuit 3 poles; rated current 16 A
Rated Operating Voltage Up to 690 V AC
Rated Frequency 50–60 Hz
Motor Power at 400 and 500 V 2.2–7.5 kW at 50 Hz
Motor Power at 690 V 3–11 kW at 50 Hz
Auxiliary Contacts 1 NC contactor-disconnection contact and 1 NO tripped-indication contact
AC-15 Auxiliary Ratings 4 A at 24–125 V AC; 3 A at 230 V AC
DC-13 Auxiliary Ratings 2 A at 24 V; 0.55 A at 60 V; 0.3 A at 110–125 V; 0.11 A at 220 V
Automatic-Reset Recovery 3 min typical after an overload trip
Main-Circuit Fuse Coordination Type 1: 50 A gG or 60 A RK5; type 2: 50 A gG or 60 A J
Auxiliary-Circuit Fuse 6 A gG
Rated-Current Power Loss 1.1 W total; 0.37 W per pole
Terminal Tightening Torque 0.8–1.2 N·m for main and auxiliary screws
Operating and Compensation Range −25 to +60 °C
Side Clearance 6 mm from grounded and live parts
Front Protection IP20; finger-safe from the front
Dimensions (W × H × D) 45 × 79 × 73 mm
Net Weight 0.219 kg
Official source:Siemens product data sheet
Frequently Asked Questions

Can 3RB3016-1TB0 be set low enough for a motor rated at 3 A?

The minimum current setting is 4 A, so a 3 A motor falls below this relay’s adjustment range.

Can 3RB3016-1TB0 reset automatically after an overload event?

Automatic reset is available with a typical recovery time of three minutes.

How can 3RB3016-1TB0 provide a separate signal that a trip has occurred?

The normally open auxiliary contact is assigned to tripped indication.

What fuse is required for the auxiliary circuit of 3RB3016-1TB0?

The auxiliary switching circuit requires a 6 A gG fuse.

How much side clearance does 3RB3016-1TB0 need near grounded metal?

Keep 6 mm of clearance at the side from grounded or live parts.

Which screwdriver and torque should I use on 3RB3016-1TB0?

Use a Pozidriv PZ 2 screwdriver and tighten the main and auxiliary terminal screws to 0.8–1.2 N·m.

What UL full-load current applies to 3RB3016-1TB0 at 480 V or 600 V?

The specified full-load current for a three-phase AC motor is 16 A at both voltages.

Compatibility & Ordering Notes
Before ordering 3RB3016-1TB0: Set the response within the 4–16 A motor-current range and select the required reset mode.

Before installation

  • Use a compatible S00 contactor and adjust the response to the motor rated current.
  • Choose manual or automatic reset to match the machine restart sequence.
  • Select the specified main-circuit fuse for type 1 or type 2 coordination.
  • Maintain 6 mm side clearance and the specified screw-terminal torque.
Hot Selling Models
WDU95N/120N
IB040BM46VD8
1.5/5-STF-3.81
D22-LD-EAK-10-20
X07V-K 1X1.5 4520111
MYH-5/3G-2.3-L-LED
ADN-63-10-APA
3RF2330-1AA24
DSNU25160PPVA
16A-aR
BS35II
R108561620
6ES5095-8MD01 6ES5375-1LA15
efector200 DD0001
NFD03.1-480-016

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.