Mitsubishi Electric MR-J2-20A MELSERVO-J2 Servo Amplifier
Manufacturer: Mitsubishi Electric
Condition: Brand New
Lead Time: In Stock
Origin: Japan
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Pair the amplifier with an approved MR-J2 motor and matching encoder connection.
- Apply the single-phase supply option only to the specified HC-MF or HA-FF motor combinations.
- Match pulse input type and pulse frequency before enabling position commands.
- Retain the required regenerative components and cabinet protection for the IP00 amplifier.
MR-J2-20A MELSERVO-J2 Servo Amplifier
MR-J2 servo amplifier for 200 W motor combinations, with pulse-train positioning, analog commands and a built-in dynamic brake.
At a Glance
| Brand | Mitsubishi Electric |
|---|---|
| Model | MR-J2-20A |
| Product Type | General-purpose AC servo amplifier |
| Core Function | Position, speed and torque control |
| Application | Approved MR-J2 motor combinations |
Pulse-train positioning
Accept differential pulses up to 400 kpps or open-collector pulses up to 200 kpps.
Analog speed and torque commands
Use a ±10 V speed command or ±8 V torque command in the selected control mode.
Tuning and protection
Automatic tuning, a built-in dynamic brake and protective shutdown functions support machine commissioning.
Product Overview
MR-J2-20A controls an approved 200 W servo motor through position, speed or torque commands.
The pulse-train input accepts differential-receiver or open-collector signals, and electronic gearing scales the incoming commands; the applicable motor combinations include HC-MF23, HA-FF23 and HC-UF23.
Key Functions
Pulse-train positioning
Accept differential pulses up to 400 kpps or open-collector pulses up to 200 kpps.
Analog speed and torque commands
Use a ±10 V speed command or ±8 V torque command in the selected control mode.
Tuning and protection
Automatic tuning, a built-in dynamic brake and protective shutdown functions support machine commissioning.
Official Specifications
| Main Supply | 3-phase 200–230 V AC, 50/60 Hz; single-phase 230 V AC with HC-MF/HA-FF combinations |
|---|---|
| Permissible Supply Voltage | 170–253 V AC, three-phase; 207–253 V AC for the specified single-phase arrangement |
| Permissible Frequency Variation | ±5% |
| Control System | Sine-wave PWM current control |
| Maximum Command-Pulse Frequency | 400 kpps differential; 200 kpps open collector |
| Electronic Gear | Numerator and denominator 1–32,767; ratio greater than 1/50 and less than 50 |
| In-Position Setting Range | 0 to ±10,000 pulses |
| Excessive-Error Threshold | ±80 kpulses |
| Analog Speed Command | 0 to ±10 V DC |
| Analog Torque Command | 0 to ±8 V DC |
| Speed Command Range | 1:1,000 analog; 1:5,000 internal |
| Speed Frequency Response | 250 Hz or higher |
| Dynamic Brake | Built in |
| Degree of Protection | Open construction, IP00 |
| Weight | 0.7 kg |
Frequently Asked Questions
Which 200 W motors can I select for MR-J2-20A?
Approved combinations include HC-MF23, HA-FF23 and HC-UF23.
Can I operate MR-J2-20A from a single-phase 230 V supply?
Single-phase 230 V operation is specified for combinations with HC-MF or HA-FF motors.
Can I send 300 kpps open-collector commands to MR-J2-20A?
Open-collector command pulses are limited to 200 kpps, while differential-receiver commands can reach 400 kpps.
How can I scale position commands in MR-J2-20A?
Electronic gearing uses a numerator and denominator from 1 to 32,767 with a ratio greater than 1/50 and less than 50.
Can MR-J2-20A accept an analog torque command?
Torque control uses a 0 to ±8 V DC analog command.
Is a dynamic brake integrated in MR-J2-20A?
The amplifier includes a built-in dynamic brake.
Can I use automatic gain adjustment during commissioning of MR-J2-20A?
The amplifier provides automatic tuning in addition to manual gain adjustment.