IC697MDL340 Output Module

Overview

Place of Origin:	USA
Brand Name:	GE
Model Number:	IC697MDL340
Packaging Details:	Original new Factory Sealed
Delivery Time:	5-7 days
Payment Terms:	T/T
Supply Ability:	In stock

Specifications

Description

The IC697MDL340 output module is a product from GE Intelligent Platforms/GE Fanuc that is manufactured as a member of Series 90-70. This module has 120 Volts AC rated voltage with a total of 16 points isolated in 4 different groups. Each of the isolated groups has a capacity of 4 Amps per group and 2 Amps per point, with 10x inrush current. This GE Fanuc discrete output module is designed and intended to enable the groups of output points to operate as separate phases of the AC power supply. It features 4 groups of outputs that are fused separately with a fuse rated at 10 Amps. The IC697MDL340 output module provides a high-level inrush current making the outputs suitable for several incandescent and inductive loads.

Applications

Steel metallurgical plants: Controlling the opening and closing of conveyor motor starters and cooling water valves.

Coal power plants: Driving electric actuators, interlocking warning lights, and auxiliary machine control relays.

Paper and pulp mills: Managing contactor coils for pulp conveying pumps and pneumatic valves for automatic packaging lines.

Oil and chemical plants: Remote pump station control and fluid switching valve operation in non-explosion-proof areas.

Features

16 Points - Four isolated groups of 4 points each

2 amp capacity per point

High inrush capacity (10x rated current)

Functions

The 120 Volt AC 2 Amp Output Module provides 16 output points in four isolated groups of four points each. This allows each group of four points to be used on different phases of the AC supply. Each group of four outputs is individually fused with a 10 amp fuse. The module provides a high degree of inrush current which makes the outputs suitable for a wide range of inductive and incandescent loads. The module will pick up most size 4 contactors. LED indicators which give the ON/OFF status of each point on the logic(PLC) side of the circuit as well as an LED to indicate the status of the fuses are located together at the top of the module. The module is mechanically keyed to ensure correct replacement with a similar type in the field. I/O references are user configurable without the use of DIP switches or jumpers on the module.

Output Characteristics

The 120 Volt AC 2 Amp Output Module is compatible with a wide variety of load devices, such as: Solenoids and motor starters,

Indicators.

The rating of 2 amps per point applies to the longterm capacity of each point. Because of overall heat dissipation within the module, the maximum current capacity for each group of four outputs is limited to 4 amperes. Each output on this module is capable of transiently conducting a surge current which is much greater than its long-term current rating. The rate at which such surges can be repeated depends on the current rating of the device and the duty cycle (percent of time the device is ON). For typical incandescent devices operating at a 50% duty cycle, the following repetition rates apply.

FAQ

Q: What is an IC697MDL340?
A: The IC697MDL340 is an 120 Volt AC, 2 Amp, 16-Point Output module of the GE Fanuc Series 90-70. This module provides 4 isolated groups of 4 points each.

Q: The 4 isolated groups of 4 output points allow what to happen?
A: Because they are isolated, it allows for each group of 4 points to be used on a different phase of the AC supply. (Each group of 4 outputs is individually fused with a 10 amp fuse.)

Q: What are the features of IC697MDL340?
A: 16 points- 4 isolated groups of 4 points, 2 amp capacity per point, high inrush capacity (10x rated current)

Q: Because IC697MDL340 has a high degree of inrush current, the outputs are suitable for what?
A: They are suitable for a large range of inductive and incandescent loads. (The module will pick up most size 4 contactors.)

Q: What do the LED indicators (located at the top of the module) tell you?
A: They inform you of the status of each point on the logic (PLC) side of the circuit. There is also a LED to tell you the status of the fuses.

Q: Is configuration of I/O references available on IC697MDL340?
A: Yes, they are configurable without the use of jumpers or DIP switches.