EN
- Overview
- Specifications
- Description
- Applications
- FAQ
- Recommended Products
Overview
Place of Origin: |
USA |
Brand Name: |
GE |
Model Number: |
IC693MDL752 |
Packaging Details: |
Original new Factory Sealed |
Delivery Time: |
5-7 days |
Payment Terms: |
T/T |
Supply Ability: |
In stock |
Specifications
|
Parameter |
Value |
|
Module Name |
IC693MDL752 Output Module |
|
Module Type |
Output Module (Negative Logic, Active Low) |
|
Dimensions |
3.5 x 13 x 13.5 cm |
|
Weight |
0.24 kg |
|
Rated Voltage |
5 V, and 12–24 V DC |
|
Output Voltage Range |
4.75–5.25 V DC (TTL mode); 10.2–28.8 V DC (12/24 V mode) |
|
Outputs per Module |
32 (four groups of 8 outputs each) |
|
Isolation |
Field to logic side: 1500 V; Between groups: 250 V |
|
Output Current |
25 mA per point max (TTL mode); 0.5 A per point max (12/24 V mode); 4 A max per group; 3 A max per group common pin |
|
Inrush Current |
4.6 A for 10 ms |
|
On-state Voltage |
0.4 V max (TTL mode) |
|
Output Voltage Drop |
0.24 V max (12/24 V mode) |
|
Off-state Leakage Current |
0.1 mA max |
|
On Response Time |
0.5 ms max |
|
Off Response Time |
0.5 ms max |
|
Internal Power Consumption |
260 mA max from 5 V bus on backplane; 12 mA max per group @5V; 25 mA max per group @12V; 44 mA max per group @24V (all outputs on) |
Description
The 5/24 volt DC (TTL) Negative Logic Output module for the Series 90-30 Programmable
Logic Controller provides 32 discrete outputs. The outputs are arranged in four isolated groups
of eight (A1 - A8, B1 - B8, C1 - C8, and D1 - D8); each group has its own common. The
outputs are negative logic or sinking type outputs (i.e., the ON state for a point results in an
active low output).
The module has two modes of operation. In the TTL mode, the outputs can switch user loads
across +5 VDC (±5%) and are capable of sinking a maximum current of 25 mA per point. In
the 12/24V mode, the outputs can switch user loads over the range of +12 through –24 VDC
(+20%, –15%) and are capable of sinking a maximum current of 0.5A per point. Two pins are
provided on the user I/O connectors for each group common. Each pin has a current handling
capability of 3 amperes. It is recommended that connections are made to both pins when
connecting the common; however, it is a requirement for high current applications (between 3
and 4 amperes).
Applications
Large-scale production line control
Complex process control
Distributed control system
High-speed data acquisition
Sensor signal acquisition
FAQ
Q: Does the IC693MDL752 come with a warranty?
A: Yes, the IC693MDL752 includes a 1-year warranty.
Q: What are the supported wiring methods of the IC693MDL752?
A: The IC693MDL752 supports the direct method using pre-wired cables and the TBQC (Terminal Block Quick Connect) method.
Q: What are the output voltage ratings of the IC693MDL752?
A: In 12/24 VDC mode, the output voltage range is 10.2 - 28.8 VDC with a nominal output of 24 VDC. In TTL mode, the output voltage range is 4.75 - 5.25 VDC with a nominal output of 5 VDC.
Q: What are the output current ratings of the IC693MDL752?
A: In 12/24 VDC mode, each output point is rated at 0.5 Amperes, 4 Amperes per group, and 3 Amperes maximum per common pin. In TTL mode, each output channel is rated at 0.25 mA.
