IC660CBB902 IC660FP8900K IC660CBB902K Bus Controller Module , China IC660CBB902 IC660FP8900K IC660CBB902K Bus Controller Module Manufacturers, Suppliers, Factory

Overview

Place of Origin:	USA
Brand Name:	GE
Model Number:	IC660CBB902 IC660FP8900K IC660CBB902K
Packaging Details:	Original new Factory Sealed
Delivery Time:	5-7 days
Payment Terms:	T/T
Supply Ability:	In stock

Specifications

Product Name:	Bus Controller Module
Model Number:	IC660CBB902 IC660FP8900K IC660CBB902K
Dimensions:	27.8 x 21.4 x 2.5 cm
Weight:	0.4 kg
Form Factor:	Standard Series Six PLC Module (CPU Rack or High-Capacity I/O Rack)
Power Requirements:	20 units at +5 V (1 unit = 300 mW), 2 units at +12 V
LED Indicators:	Board OK, Comm OK
Number of Bus Devices:	Up to 32
Bus Type:	Shielded twisted pair cable
Isolation:	1500 V between devices on bus
Baud Rates:	153.6K (standard), 153.6K (extended), 76.8K, 38.4K
Bus Length:	Up to 606 m (153.6K baud), 2283 m (38.4K baud)
Bus Scan Time:	3 ms minimum (1 ms overhead), 10 ms typical, 400 ms maximum
Communications:	Transmit Global Data, Transmit Datagram (with/without Reply), Read/Write Device from serial bus to Series Six CPU
Operating Temperature:	0 to +60 °C (32 to 140 °F)
Storage Temperature:	-25 to +60 °C (-13 to 140 °F)
Humidity:	5%–95% Non-Condensing

Description

The IC660CBB902 IC660FP8900K IC660CBB902K Bus Controller module is the required interface between a Series Six Plus PLC and the Genius I/O blocks when they are included in the PLC’s I/O system. The Bus Controller module can be placed in any I/O slot in the CPU or in a high-capacity I/O rack located in a CPU station or Local I/O station up to 2000 feet (600 meters) from the CPU. Multiple Bus Controllers can be placed in one rack. Since each Bus Controller consumes 20 units of load, up to 5 modules can be placed in a CPU rack, or 10 modules in a high capacity I/O rack. A Bus Controller can be placed in an I/O rack in a Remote I/O station if the CPU scan time is greater than 10 ms. However, because of the reduced capacity of the serial I/O communications link, window commands would not be supported. Each Bus Controller can interface up to 30 Genius I/O blocks to the Series Six Plus CPU by twisted pair communications up to 2000 feet (600 meters). The only limit to the number of Bus Controllers in any one PLC system is the I/O capacity of the Series Six Plus CPU. Each Bus Controller, similar to any I/O module, has access to all I/O references on its I/O chain.

Applications

Steel and metallurgical plants: Used for production lines requiring long-distance signal transmission and strong anti-interference capabilities, such as continuous casting and rolling mills.

Power plants (nuclear/thermal): Utilizes its powerful remote diagnostic capabilities to monitor sensors distributed throughout the plant area.

Petrochemical plants: Supports redundant configurations to meet the requirement that critical workstations cannot be shut down.

Paper and pulp mills: Manages complex drive control systems and pump stations.

INSTALLING

Before installing the Bus Controller, system configuration should be properly planned. See the Genius I/O System User's Manual. To install a Bus Controller, you must:

1. Set the DIP switches and jumpers on the Bus Controller

2. Set the I/O reference DlP switch at rear of rack

3. Insert the Bus Controller in the rack

4. Attach the serial bus wires

5. Power up I/O rack and/or CPU.

FAQ

Q: What is the IC660CBB902 IC660FP8900K IC660CBB902K?

A: It is a Bus Controller Module.

Q: What shipping methods are used for IC660CBB902 IC660FP8900K IC660CBB902K?

A: Major carriers like FedEx, DHL, and UPS are primarily used for worldwide delivery.

Q: Do you provide warranty as standard?

A: We provide a full 12-month warranty for IC660CBB902 IC660FP8900K IC660CBB902K. If any problems occur within 12 months from the delivery date, you can contact our team for guidance and support.

Q: How to Check Price and Availability for IC660CBB902 IC660FP8900K IC660CBB902K?

A: Please contact John Yang for sales at +86-18150117685 or request a quote.