EN
HMS Networks Ixxat 021620-B CM CANopen Interface Module
Manufacturer: HMS Networks / Ixxat
Condition: Brand New
Lead Time: In Stock
Origin: Verify product nameplate
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
021620-B CM CANopen
Official HMS Networks / Ixxat identification and specifications for 021620-B, prepared for accurate replacement matching and quotation.
At a Glance
| Article Number | 021620-B |
|---|---|
| Manufacturer | HMS Networks / Ixxat |
| Platform | SIMATIC S7-1200 companion module |
| Product Type | CANopen master/slave interface |
| Supported Protocols | CANopen and transparent CAN 2.0A |
| CANopen Nodes | Up to 16 slave nodes in master mode |
| Modules per CPU | Up to 3 |
| Configuration Interface | Mini-USB |
| Country of Origin | Verify product nameplate |
Exact Identification
Match the complete article number 021620-B.
CM CANopen
Connects CANopen devices to an S7-1200 controller in master or slave mode.
Compatibility Check
Verify the installed S7-1200 CPU and available communication-module position. Back up the TIA Portal project and CANopen network configuration. Confirm baud rate, master/slave mode, node addresses and D-Sub wiring.
Product Overview
021620-B is officially identified by HMS Networks as the Ixxat CM CANopen interface module for SIMATIC S7-1200 automation systems.
It bridges an S7-1200 controller to CANopen or CAN 2.0A devices and can be configured as a CANopen master or slave through TIA Portal integration and CM CANopen Configuration Studio.
Key Functions
CANopen Master or Slave
Connects CANopen devices to an S7-1200 controller in master or slave mode.
Scalable Integration
Supports up to three modules per CPU and up to 16 CANopen slave nodes per module in master mode.
Transparent CAN 2.0A
Supports custom CAN protocols with pre-made function blocks for TIA Portal.
Official Specifications
| Manufacturer | HMS Networks / Ixxat |
|---|---|
| Series | Ixxat CM CANopen |
| Article Number | 021620-B |
| Product Type | CANopen Interface Module for SIMATIC S7-1200 |
| Series | Ixxat CM CANopen |
| Product Designation | CM CANopen |
| Application | SIMATIC S7-1200 CANopen integration |
| Operating Modes | CANopen master or slave |
| CAN Bit Rate | 20 kbit/s to 1 Mbit/s |
| I/O Data | 256 bytes input and 256 bytes output per module |
| CANopen Nodes | Up to 16 slave nodes in master mode |
| Modules per CPU | Up to 3 |
| Subnetwork Interface | D-Sub 9 |
| Configuration | Mini-USB and CM CANopen Configuration Studio |
| Supply | 5 V DC ±10% from S7-1200 |
| Protection | IP20 |
| Dimensions | 30 x 100 x 72 mm |
| Operating Temperature | 0 to +60 °C |
Frequently Asked Questions
What is 021620-B?
It is the HMS Networks Ixxat CM CANopen interface module for SIMATIC S7-1200 systems.
Can it operate as master or slave?
Yes, the module can be configured as a CANopen master or slave.
How many CANopen nodes are supported?
In master mode, one module supports up to 16 CANopen slave nodes.
How many modules can be connected to one CPU?
The official documentation supports up to three CM CANopen modules per S7-1200 CPU.
Which protocols are supported?
CANopen and transparent CAN 2.0A are supported.
How is the module configured?
Configuration is performed through TIA Portal integration and CM CANopen Configuration Studio over Mini-USB.
What should be checked before replacement?
Verify article number 021620-B, CPU compatibility, node configuration, baud rate, D-Sub wiring and project backup.
Compatibility & Ordering Notes
Compatibility Checklist for 021620-B
- Match the complete article number 021620-B.
- Verify the installed S7-1200 CPU and available communication-module position.
- Back up the TIA Portal project and CANopen network configuration.
- Confirm baud rate, master/slave mode, node addresses and D-Sub wiring.
