EN
- Overview
- Specifications
- Description
- Applications
- Maintenance Recommendations
- FAQ
- Recommended Products
Overview
Place of Origin: |
Sweden |
Brand Name: |
ABB |
Model Number: |
DSQC378B 3HNE00421-1 |
Packaging Details: |
Original new Factory Sealed |
Delivery Time: |
5-7 days |
Payment Terms: |
T/T |
Supply Ability: |
In stock |
Specifications
|
Model: |
DSQC378B |
|
Part Number: |
3HNE00421-1 |
|
Type: |
Robot CC-Link Communication Module |
|
Dimensions: |
17 x 11.7 x 5.5 cm |
|
Weight: |
0.5 kg |
|
Function: |
Protocol conversion and data communication between ABB robot controller and CC-Link network |
|
Operating Mode: |
Slave only (not master capable) |
|
System Requirement: |
Requires 709-1 DeviceNet Master/Slave option |
|
Supply Voltage: |
24 VDC |
|
Operating Temperature: |
0°C to +55°C |
Description
The DSQC378B 3HNE00421-1 is the CC-LINK communication board for the DSQC378B 3HNE00421-1 controller, which allows the robot to interact with devices on the CC-LINK fieldbus. It consists of a technical plastic circuit board with an interface hub circuit for CC-LINK communication. The communication interface board is powered by 24V DC. The board is fully compatible with the DSQC378B 3HNE00421-1 controller and can be installed directly into the option slot of the DSQC378B 3HNE00421-1 to expand the CC-LINK interface without programming.
Applications
Auto assembly plants: Used for high-speed logic coordination between ABB robots and Mitsubishi Q-series or R-series PLCs.
LCD panel manufacturing plants: Enables seamless integration of robots and supervisory control systems in ultra-large-scale automated production lines.
Lithium-ion battery manufacturing plants: Ensures precise synchronization between robot gripping actions and conveyor belts during cell winding or assembly.
Precision electronics foundries: Used for data sharing between multiple robot clusters and a central control room.
Semiconductor packaging and testing plants: Provides highly reliable industrial bus communication in cleanroom environments.
Maintenance Recommendations
Wiring Tightening: Due to factory vibrations, the CC-Link terminal block (X8) may loosen. It is recommended to tighten the screws every six months.
Address Verification: Before replacing a spare part, be sure to record the DIP switch position of the faulty board to ensure that the physical address of the new board is completely consistent with the old board.
ESD Protection: This module contains sensitive communication chips. Power must be disconnected when plugging or unplugging cables to prevent power surges.
FAQ
Q: What is the DSQC378B 3HNE00421-1 mainly used for?
A: The DSQC378B 3HNE00421-1 is mainly used as a protocol converter. In systems where a factory uses Mitsubishi CC-Link and ABB robots, it enables communication between the two systems.
Q: Why doesn't the DeviceNet indicator light on the DSQC378B 3HNE00421-1 illuminate after power-on?
A: First check the 24V power supply at the X3 interface. The DSQC378B 3HNE00421-1 requires external power to activate its communication circuit.
Q: What should I pay attention to when setting the CC-Link station number on the DSQC378B 3HNE00421-1?
A: Ensure the station number is unique within the CC-Link network. Also configure the occupied station count and baud rate correctly in the robot system parameters.
Q: Is the DSQC378B 3HNE00421-1 compatible with the older DSQC378?
A: The DSQC378B 3HNE00421-1 is an upgraded version with improved hardware stability. It can replace most earlier S4C+ or IRC5 system modules, but system parameter backup is recommended before replacement.
