DS200GDPAG1AEB High-Frequency Power Supply Board

Overview

Place of Origin:	USA
Brand Name:	GE
Model Number:	DS200GDPAG1AEB
Packaging Details:	Original new Factory Sealed
Delivery Time:	5-7 days
Payment Terms:	T/T
Supply Ability:	In stock

Specifications

Description

The DS200GDPAG1AEB is a high-frequency power supply board designed for the Mark V board series by General Electric. This 600 to 700 W board can accept both AC and DC supplied power supply once fitted. This card can be used to install and apply to a variety of GE drives and exciters.

1.The board may receive AC power ranging from 80 to 132 VAC. If the drive is powered by DC, the sources can range from 105 to 140 VDC.

2.The DS200GDPAG1AEB gives the finest user experience thanks to a variety of integrated board features. A 120 VDC power supply, a 50 VAC output transformer, and a control power supply are among the features.

3.Onboard are control signal level circuits as well as protective circuits.The key characteristics of this board are an input rectifier and filter, a regulator, and a 27 kHz inverter

4.All of the board's inputs are isolated, guaranteeing that there are no interruptions or voltage spikes. Users can check the status of the board using four onboard LEDs and two neon indicators

5.Installation and storage specifications specified by the manufacturer for both the board and the drive should be reviewed and followed. This set of instructions will ensure that the entire system runs smoothly.

Applications

1.Plua and Stab-on Connectors:The High Frequency Power Supply Board offers versatile connectivity options throuah the inclusion of twelve plug connectors and two stab-on connectors. These connectors serve as interfaces for connecting external devices or subsystems to the board, facilitating seamless integration and compatibility with various system configurations.

2.Grounding Mechanism: Ensuring proper grounding is essential for the safe and reliable operation of the board. To achieve this, the board is grounded via three mounting screws, designated as GND1, GND2, and GND3. This grounding mechanism effectively dissipates excess electrical charge and mitigates the risk of electrical hazards, promoting system safety and stability.

3.Fuses: Integrated fuses serve as crucial protective devices, safeguarding the board and connected equipment against overcurrent conditions or electrical faults. These fuses help prevent damage to components and ensure the longevity of the board's operation.

4.Test Points: Test points are provided to facilitate diagnostic procedures and troubleshooting activities. These points allow for convenient access to key electrical signals and voltages, enabling operators to perform precise measurements and assessments of the board's performance.

Key Components and Functions

1.Input Rectifier and Filter: The board features an input rectifier and filter mechanism, responsible for converting and filtering incoming power from external sources. This process ensures the delivery of clean and stable power to subsequent stages of the power supply system.

2.Regulator (Buck Chopper): A regulator, commonly known as a buck chopper, drives a regulated direct current (DC) bus, maintaining a consistent voltage level tc meet the demands of connected loads.

3.27 kHz Inverter: Operating from the regulated DC bus, a 27 kHz inverter is integrated into the GDPA board, facilitating the conversion of DC power into high-frequency alternating current (AC). This inverter plays a pivotal role in powering specific components or systems requiring AC power.

4.Output Transformer: The board incorporates an output transformer designed to provide 50 volts AC outputs, catering to the diverse voltage requirements of connected devices or subsystems.

5.120 V DC Power Supply: Additionally, the board includes a 120-volt DC power supply, ensuring the availability of stable DC power for various applications within the system.

6.Control Power Supply: To support the operation of control systems and associated components, the board features a dedicated control power supply, delivering the necessary power to ensure optimal functionality.

7.Control Signal Level Circuits: Integrated control signal level circuits enable the processing and manipulation of control signals, facilitating precise control and coordination of system operations.

8.Protective Circuits: Critical to the safeguarding of the board and connected equipment, protective circuits are implemented to detect and mitigate potential faults or abnormal operating conditions, ensuring the integrity and reliability of the power supply system.

Frequently Asked Questions

Q: What is DS200GDPAG1AEB?

A: The DS200GDPAG1AEB is a high-frequency power supply board that can deliver 600 or 700 watts.

Q: On the DS200GDPAG1AEB, how is voltage controlled?

A: The voltage on windings 10, 11, and 12 of output transformer T1 on the board is sensed to regulate the voltage.

Q: Is there an inverter on the DS200GDPAG1AEB?

A: Yes, the inverter runs at 27 kHz and is powered by the regulated bus.

Q: How can I get DS200GDPAG1AEB?

A: Contact John. DS200GDPAG1AEB boards and other turbine control parts are available.