EN
Emerson CON041 PR6423/000-131 8 mm Eddy-Current Measurement System
Manufacturer: Emerson (EPRO/AMS)
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
EPRO EDDY-CURRENT MEASUREMENT
CON041 PR6423/000-131 8 mm Eddy-Current Measurement System
Official-source product identification, application guidance and ordering checks for CON041 PR6423/000-131.
At a Glance
| Brand | Emerson (EPRO/AMS) |
|---|---|
| Model | CON041 PR6423/000-131 |
| Product Type | 8 mm Eddy-Current Measurement System |
| Core Function | Non-contact shaft displacement and vibration monitoring. |
| Application / Compatible Series | EPRO eddy-current measurement |
Verified identification
CON041 PR6423/000-131 is identified by the complete manufacturer model and the photographed unit.
Application focus
CON041 PR6423/000-131 is intended for non-contact shaft displacement and vibration monitoring.
Ordering control
CON041 PR6423/000-131 should be matched by the full nameplate, hardware revision and installed configuration.
Product Overview
CON041 PR6423/000-131 is an Emerson EPRO/AMS eddy-current measurement chain using the PR6423 8 mm probe and CON041 converter.
Emerson documentation specifies a 2 mm nominal measurement range, an 8 V/mm nominal scale factor and a −35 to +180 °C nominal probe temperature range for PR6423. Accurate operation depends on the complete calibrated chain.
Key Functions
Shaft Proximity Sensing
Provides non-contact measurement of a conductive shaft or target for appropriate displacement and vibration monitoring.
8 mm Probe Characteristics
The PR6423 system uses an 8 mm probe, 2 mm nominal range and 8 V/mm nominal scale factor.
Converter Interface
CON041 supplies and conditions the probe signal for the selected monitor input and output-range configuration.
Official Specifications
| Probe diameter | 8 mm |
|---|---|
| Nominal measuring range | 2 mm |
| Nominal scale factor | 8 V/mm |
| Probe temperature | −35 to +180 °C nominal |
| Shaft Proximity Sensing | Provides non-contact measurement of a conductive shaft or target for appropriate displacement and vibration monitoring. |
| 8 mm Probe Characteristics | The PR6423 system uses an 8 mm probe, 2 mm nominal range and 8 V/mm nominal scale factor. |
| Converter Interface | CON041 supplies and conditions the probe signal for the selected monitor input and output-range configuration. |
| Operating Temperature Range | 35 to +180 °C |
| Measurement Principle | Eddy current |
| Target Material | Conductive |
| Signal Converter | CON041 |
| Measurement Method | Non-contact |
| Minimum Operating Temperature | −35 °C |
| Maximum Operating Temperature | +180 °C |
Official source: Emerson PR642x Eddy-Current Sensor and CON041 Converter Installation Guides. Commercial stock, warranty and shipping statements are seller terms.
Frequently Asked Questions
How should engineers verify CON041 PR6423/000-131 compatibility with EPRO eddy-current measurement?
It is intended for EPRO eddy-current measurement.
How is CON041 PR6423/000-131 normally applied when an 8 mm Eddy-Current Measurement System is required?
Non-contact shaft displacement and vibration monitoring.
How should engineers prepare the existing system for installation of CON041 PR6423/000-131?
Read the complete the specified code probe marking. Match the installed the specified code version and output selection.
How does CON041 PR6423/000-131 handle shaft proximity sensing?
Provides non-contact measurement of a conductive shaft or target for appropriate displacement and vibration monitoring.
What should technicians verify about 8 mm probe characteristics when commissioning CON041 PR6423/000-131?
The PR6423 system uses an 8 mm probe, 2 mm nominal range and 8 V/mm nominal scale factor.
Why is converter interface important when integrating CON041 PR6423/000-131?
The specified code supplies and conditions the probe signal for the selected monitor input and output-range configuration.
How should an engineer match CON041 PR6423/000-131 before replacing an installed unit?
The unit should be matched by the full nameplate, hardware revision and installed configuration.
Compatibility & Ordering Notes
Compatibility checklist for CON041 PR6423/000-131
- Read the complete PR6423/000-131 probe marking.
- Match the installed CON041 version and output selection.
- Confirm cable type, total length and connector condition.
- Verify mechanical gap, target and monitor scaling.
