IC697MDL350 Discrete Output Module

Overview

Place of Origin:	USA
Brand Name:	GE
Model Number:	IC697MDL350
Packaging Details:	Original new Factory Sealed
Delivery Time:	5-7 days
Payment Terms:	T/T
Supply Ability:	In stock

Specifications

Description

The IC697MDL350 module is a discrete output module manufactured by GE Fanuc as part of Series 90-70. It operates on a voltage of 120 Volts AC, with 0.5 Amps of current capacity for each of the 32 output points that are isolated into 4 groups with 8 points each. This module comes with a high inrush capacity of about 20 times the rated current. It allows for the use of every 8-point group on a different AC supply phase. Each of the output groups is fused with a fuse rated at 5 Amps and it shows a inrush current that make the outputs suitable for a variety of inductive loads. The IC697MDL350 output module has LED indicators that indicate the on/off status for each output point on the circuit’s PLC side. It also features an LED that shows the status of the fuses that are found on the top side of the module.

Applications

Large metallurgical plants: DC solenoids, brake control, and indicator lights used in high-dust environments.

Oil and chemical plants: DC control relays driving remote pumping stations and DC solenoid valves in key process sections.

Paper and printing plants: Used for long-distance control circuits, utilizing 125V DC to overcome line voltage drop and electromagnetic interference.

Features

32 Points - Four isolated groups of 8 points each

0.5 amp capacity per point

High inrush capacity (20x rated current)

Function

The 120 Volt AC 0.5 Amp Output Module provides 32 output points in four isolated groups of 8 points each. This allows each group of 8 points to be used on a different phase of the AC supply. Each group of 8 outputs is individually fused with a 5 amp fuse. The module provides a high degree of inrush current which makes the outputs suitable for a wide range of inductive and incandescent loads. The module will pick up most size 2 contactors. LED indicators which give the ON-OFF status of each point on the logic (PLC) side of the circuits as well as an LED to indicate the status of the fuses are located together at the top of the module.

Output Characteristics

The 120 Volt AC 0.5 Amp Output Module is compatible with a wide variety of load devices, such as: Solenoids and motor starters,

Indicators.

The rating of 0.5 amps per point applies to the longterm current capacity of each point. Because of overall heat dissipation within the module, the maximum current capacity for each group of 8 outputs is limited at higher temperatures (refer to the specifications on the last page of this data sheet). Each output on this module is capable of transiently conducting a surge current which is much greater than its long-term current rating. The rate at which such surges can be repeated depends on the current rating of the device and the duty cycle (percent of time the device is ON). For typical incandescent devices operating at a 50% duty cycle, the following repetition rates apply.

FAQ

Q: What is an IC697MDL350?
A: The IC697MDL350 is an 120 Volt AC, 0.5 Amp, 32-Point Output module from the GE Fanuc Series 90-70. This module provides 32 output points in 4 isolated groups of 8 points each.

Q: What features does it include?
A: 32 points- 4 isolated groups of 8 points each, 0.5 amp capacity per point, high inrush capacity (20x rated current)

Q: The 32 output points allow what to happen?
A: It allows each group of 8 points to be used on different phases of the AC supply.

Q: Each output point is fused with what?
A: Each group of 8 outputs is individually fused with a 5 amp fuse.

Q: Because IC697MDL350 provides a high degree of inrush current, what does that mean?
A: It means that it makes the outputs suitable for a wide range of inductive and incandescent loads.

Q: IC697MDL350 will pick up what size contactors?
A: This module will pick up most size 2 contactors.