Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens tx io txm1 6r 6 relay output module-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens TX-I/O TXM1.6R 6 Relay Output Module

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Switzerland
Warranty: 12 Months

  • Overview
  • Product Overview
  • Key Functions
  • Official Specifications
  • Frequently Asked Questions
  • Compatibility & Ordering Notes
  • Hot Selling Models
  • Recommended Products
Overview
SIEMENS TX-I/O · RELAY OUTPUT MODULE

Siemens TX-I/O TXM1.6R 6-Relay Output Module

TX-I/O module with six independently configurable volt-free changeover relay outputs for maintained, pulsed, multistage and three-position control functions.

At a Glance

Brand / Manufacturer Siemens
Model / Article Number TXM1.6R
Product Type Six-channel relay output module
Core Function Switches six independently configurable volt-free relay outputs
Application / Compatible Series Siemens TX-I/O / DESIGO building automation systems
Output Modes
Maintained, pulsed, multistage and three-position control.
Voltage Classes
Adjacent points may use AC 250 V and SELV/PELV 24 V circuits.
Module Handling
Plug-in I/O module and terminal base permit replacement without rewiring.
Product Overview

TXM1.6R is officially identified by Siemens as TX-I/O relay output module with six individually configurable changeover contacts for building automation applications.

The complete article number TXM1.6R should be matched against the installed hardware, nameplate and official project documentation. Similar products can differ in electrical ratings, interfaces, connector design or approved system use.

Ordering focus: provide the installed TXM1.6R nameplate, hardware revision and cabinet or field configuration for quotation verification.
Key Functions

Model-Specific Configuration

TXM1.6R: Six changeover relay outputs; TXM1.6R is the version without local manual override.

System Interface

TXM1.6R: Bus supply is 21.5 to 26 V DC and maximum module power consumption is 1.7 W.

Replacement Control

TXM1.6R: Contacts support AC 12 to 250 V up to 4 A resistive, or DC 12 to 30 V up to 3 A resistive.

Official Specifications
Operating Voltage 21.5 V DC to 26 V DC, SELV or PELV
Maximum Power Consumption 1.7 W
AC Switching Voltage 12 V AC to 250 V AC
AC Resistive Current, Maximum 4 A
AC Inductive Current, Maximum 3 A at cos φ ≥ 0.6
DC Switching Voltage 12 V DC to 30 V DC
DC Resistive Current, Maximum 3 A at 30 V DC
Make Current 20 A for 10 ms; 10 A for 1 s
Contact Life at 250 V AC 8 million operations at 0.1 A; 2 million at 0.5 A; 0.2 million at 4 A
Insulation Test Level 3,750 V AC between relay outputs and system electronics
External Fuse, Maximum 10 A slow-blow
Circuit Breaker, Maximum 13 A, characteristic B, C or D
Terminal Design Cage-clamp terminals
Solid Conductor Range 0.5 mm² to 4 mm²
Stranded Conductor Range 0.5 mm² to 2.5 mm² without sleeves
Maximum Terminal Torque 0.6 N·m
Operating Temperature -5 °C to +50 °C
Storage and Transport Temperature -25 °C to +70 °C
Relative Humidity 5% to 95%
Protection Rating IP30 front components; IP20 terminal base
Official source: Siemens official data sheet CM2N8175en_12 for TXM1.6R. Technical values shown above are limited to the official Siemens product data.
Frequently Asked Questions

Which building-automation applications are suitable for TXM1.6R?

It is designed for TX-I/O and DESIGO relay-switching functions such as maintained, pulsed, multistage and three-position control.

How can the six outputs of TXM1.6R be configured?

Each volt-free changeover output can be assigned independently to the supported relay control functions.

What AC and DC load ranges can TXM1.6R switch?

The contacts support 12 to 250 V AC and 12 to 30 V DC within the stated current limits.

May mixed voltage classes be wired on adjacent TXM1.6R points?

Adjacent points may use AC 250 V mains circuits and SELV/PELV 24 V circuits because the relay contacts are isolated and not interconnected.

In which orientation may TXM1.6R be mounted?

Any orientation is permitted when ventilation keeps the ambient temperature within -5 °C to +50 °C.

What must be retained when replacing the plug-in module of TXM1.6R?

Keep the address key in the terminal base; the plug-in module can then be replaced without rewiring the remaining I/O modules.

Which terminal protection should be provided for TXM1.6R?

Use no more than a 10 A slow-blow fuse or a 13 A type B, C or D circuit breaker for the incoming cable.

Compatibility & Ordering Notes
Before ordering TXM1.6R: compare the full article number, hardware revision, official Siemens configuration, electrical ratings, connectors and any required accessories.

Compatibility Checklist for TXM1.6R

  • Match the complete article number TXM1.6R without shortening the suffix.
  • Confirm the installed TX-I/O family and hardware revision.
  • Verify: Six changeover relay outputs; TXM1.6R is the version without local manual override.
  • Confirm included connectors and accessories in the written quotation.
Hot Selling Models
GSA-SB
ABB 1SVR427071R0000
J110
ABB CL-LAS.SD002 1SVR440713R0000
APIN0315
MNX-A1 CS94113
P9XPNVG 185002
9066630T
SCB100-S2
3RV2902-1DP0
3RV2901-1J
LV429120 NSX100-250 3P3DMA100
PRT-PSU-DIN-4A
PW481-10-S2
HZM / 315-034850-7

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.