Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens simatic s7 400 6es7421 7dh00 0ab0 sm421 digital input-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens SIMATIC S7-400 6ES7421-7DH00-0AB0 SM 421 Digital Input

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Product Overview
  • Key Functions
  • Official Specifications
  • Frequently Asked Questions
  • Compatibility & Ordering Notes
  • Hot Selling Models
  • Recommended Products
Overview
SIEMENS SIMATIC S7-400 · DIGITAL INPUT MODULE

6ES7421-7DH00-0AB0 SM 421 Digital Input Module

Official Siemens technical data for a 16-channel isolated UC digital input module with parameterizable diagnostics and alarms.

At a Glance

Brand Siemens
Model 6ES7421-7DH00-0AB0
Product Type SM 421 digital input module
Core Function Acquires UC field signals with parameterizable alarms and diagnostics
Application / Compatible Series SIMATIC S7-400

Signal Match

Confirm the UC 24–60 V field-signal range before replacement.

Channel Setup

Review the two parameter groups and configured input delays.

Diagnostic Check

Match alarm, diagnostic and wiring settings to the project.

Product Overview

6ES7421-7DH00-0AB0 is officially identified by Siemens as SIMATIC S7-400 SM 421 isolated digital input module with 16 inputs for UC 24 to 60 V, including alarm and diagnostic functions.

The complete article number 6ES7421-7DH00-0AB0 should be matched against the installed hardware, nameplate and official project documentation. Similar products can differ in electrical ratings, interfaces, terminal design, packing quantity or approved system use.

Ordering focus: provide the installed 6ES7421-7DH00-0AB0 nameplate, hardware revision and system configuration for quotation verification.
Key Functions

Model-Specific Configuration

6ES7421-7DH00-0AB0: Provides 16 isolated digital inputs for UC 24 to 60 V.

System Interface

6ES7421-7DH00-0AB0: Includes Siemens-listed alarm and diagnostic functions.

Replacement Control

6ES7421-7DH00-0AB0: Siemens lists a 0.790 kg net weight and 23.30 × 30.20 × 4.10 cm packaging dimensions.

Official Specifications
Digital Inputs 16
Input Signal Range UC 24–60 V
Simultaneously Controllable Inputs 16
Parameter Groups Channels 0–7 and 8–15
Selectable Input Delay 0.5 ms, 3 ms, 10 ms or 20 ms
Shielded Cable Length Maximum 1,000 m
Unshielded Cable Length Maximum 600 m at 3/10/20 ms; 100 m at 0.5 ms
2-Wire Sensor Connection Supported
Permissible Sensor Quiescent Current Maximum 0.5 mA
Backplane-Bus Current at 5 V DC Maximum 150 mA
Power Loss Typically 8 W
Diagnostic Information Readable through module diagnostic data
Wire-Break Monitoring Supported
Channel Fault Indicator No dedicated F LED
Channel Isolation Potential separation in groups of 1
Isolation Test Voltage 1,500 V AC
Input Status Indication Green LED for each digital input
Dimensions (W × H × D) 25 × 290 × 210 mm
Approximate Weight 600 g
Frequently Asked Questions

How are the input channels grouped for parameterization on 6ES7421-7DH00-0AB0?

The 16 inputs are organized in two parameter groups: channels 0–7 and channels 8–15.

Which field signals can be connected to 6ES7421-7DH00-0AB0?

The inputs are specified for UC 24–60 V signals, and the field circuit must remain within the Siemens-listed electrical limits.

Can the input delay of 6ES7421-7DH00-0AB0 be adjusted for fast signals?

Yes. The selectable input-delay values are 0.5 ms, 3 ms, 10 ms and 20 ms for each parameter group.

What cable lengths are permitted with 6ES7421-7DH00-0AB0?

Shielded runs are specified up to 1,000 m. Unshielded runs are limited to 600 m at 3/10/20 ms and 100 m at the 0.5 ms setting.

Can 2-wire sensors be used with 6ES7421-7DH00-0AB0?

Yes. A connected 2-wire sensor must have a permissible quiescent current no greater than 0.5 mA.

Which diagnostic functions can be configured for 6ES7421-7DH00-0AB0?

Module diagnostics, diagnostic alarms and hardware interrupts are available and parameterizable in the S7-400 project.

What isolation should be considered when installing 6ES7421-7DH00-0AB0?

The channels are potential-separated in groups of one, with isolation to the backplane bus tested at 1,500 V AC.

Compatibility & Ordering Notes
Before ordering 6ES7421-7DH00-0AB0: compare the full article number, hardware revision, official Siemens configuration, electrical ratings, terminals or connectors and required accessories.

Compatibility Checklist for 6ES7421-7DH00-0AB0

  • Match the complete article number 6ES7421-7DH00-0AB0 without shortening the suffix.
  • Confirm the installed SIMATIC S7-400 system and hardware revision.
  • Verify: Provides 16 isolated digital inputs for UC 24 to 60 V.
  • Confirm included terminals, connectors and accessories in the written quotation.
Hot Selling Models
SCD2200-RTU
AP-ANT-2
ABB M2301 2TMA070080W0012
LV426804
6ES7350-1AH03-0AE0
FET-40G 10-2920-02
520BID01 ABB 1KGT033200R0001
SEM1700
220-16155-001
3HE04823AAAA01 RTXM228-401-C82
C73195-A100-B65-1
LVM20
2CDG110004R0011
C054045C001B
RS-485

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.