EN
Siemens SIMATIC S7-400 6ES7416-2XN05-0AB0 CPU 416-2
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
6ES7416-2XN05-0AB0 CPU 416-2
Officially documented SIMATIC S7-400 component for central S7-400 control with integrated MPI/PROFIBUS DP communication.
At a Glance
| Brand / Manufacturer | Siemens |
|---|---|
| Model / Article Number | 6ES7416-2XN05-0AB0 |
| Product Type | CPU 416-2 |
| Core Function | Full Siemens article number 6ES7416-2XN05-0AB0 for exact spare-part matching. |
| Application / Compatible Series | SIMATIC S7-400 |
Exact Identification
Match the complete article number 6ES7416-2XN05-0AB0, photographed nameplate and installed firmware or hardware revision before replacement.
Interface Arrangement
Confirm integrated MPI/DP and PROFIBUS DP interfaces used by the installed project.
Configuration Check
Verify STEP 7 hardware configuration for firmware V5.3 and a compatible S7-400 memory card before commissioning.
Product Overview
Siemens SIMATIC S7-400 6ES7416-2XN05-0AB0 CPU 416-2 is an officially documented SIMATIC S7-400 product designed for central S7-400 control with integrated MPI/PROFIBUS DP communication. Its article number identifies the exact hardware variant and should be matched in full when planning a replacement or spare.
The unit provides integrated MPI/DP and PROFIBUS DP interfaces. Engineering, firmware, memory, rack, field wiring and network settings must be checked against the active project before installation.
Key Functions
Model-specific identification
Full Siemens article number 6ES7416-2XN05-0AB0 for exact spare-part matching.
System role
Designed for central S7-400 control with integrated MPI/PROFIBUS DP communication.
Integrated communication
Provides integrated MPI/DP and PROFIBUS DP interfaces.
Engineering continuity
Check STEP 7 hardware configuration for firmware V5.3 and a compatible S7-400 memory card.
Power planning
5 V DC backplane current 0.9 A typical, 1.1 A maximum; typical power loss 4.5 W
Official Specifications
| CPU / Firmware | CPU 416-2 / V5.3 |
|---|---|
| Work Memory | 5.6 MB total: 2.8 MB code / 2.8 MB data |
| Bit / Word / Fixed-Point Operation Time | 30 ns |
| Floating-Point Operation Time | 90 ns |
| Integrated Interfaces | MPI/DP and PROFIBUS DP |
| Backplane Current at 5 V DC | 0.9 A typical / 1.1 A maximum |
| Power Loss | Typical 4.5 W |
| Memory Card Capacity | Up to 64 MB |
| Dimensions (W × H × D) | 25 × 290 × 219 mm |
| Weight | Approx. 720 g |
Frequently Asked Questions
Which engineering software release is required for 6ES7416-2XN05-0AB0?
Use STEP 7 V5.3 SP2 or later with the applicable hardware update.
How is the work memory arranged in 6ES7416-2XN05-0AB0?
The 5.6 MB work memory is divided into 2.8 MB for code and 2.8 MB for data.
Which plant-bus interfaces are integrated in 6ES7416-2XN05-0AB0?
The CPU provides an MPI/DP interface and a separate PROFIBUS DP interface.
What memory-card capacity can be used with 6ES7416-2XN05-0AB0?
SIMATIC memory cards with capacities up to 64 MB are supported.
What backplane-bus load should be allowed for 6ES7416-2XN05-0AB0?
Allow about 0.9 A typical and 1.1 A maximum from the 5 V DC backplane supply, with approximately 4.5 W power loss.
What execution-time values matter when assessing 6ES7416-2XN05-0AB0?
Typical bit, word and fixed-point operations are 30 ns, while floating-point operations are 90 ns.
What cabinet space is needed to install 6ES7416-2XN05-0AB0?
Reserve approximately 25 × 290 × 219 mm and account for a mass of about 720 g.
Compatibility & Ordering Notes
S7-400 CPU 416-2 Rack and Network Checklist for 6ES7416-2XN05-0AB0
- Compare every character of the nameplate article number.
- Confirm the firmware or hardware revision supported by the engineering project.
- Check rack, connector, memory, power and environmental requirements.
- Record addressing, station names, redundancy and network parameters before removal.
- Keep a verified project backup and follow the official manufacturer installation instructions.
