Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens simatic s7 400 6es7405 0da02 0aa0 ps 405 4 a dc power supply module-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens SIMATIC S7-400 6ES7405-0DA02-0AA0 PS 405 4 A DC Power Supply Module

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview

Siemens · SIMATIC S7-400 PS 405/407

6ES7405-0DA02-0AA0 PS 405 4 A DC Power Supply Module

Siemens 6ES7405-0DA02-0AA0 is the single-slot PS 405 4 A supply for SIMATIC S7-400 racks. It accepts nominal 24 V, 48 V or 60 V DC plant power and provides isolated, short-circuit-protected backplane power with power-failure buffering and optional battery support.

At a Glance

Brand Siemens
Model 6ES7405-0DA02-0AA0
Product Type PS 405 Power Supply Module
Core Function Converts plant DC input into regulated S7-400 rack operating power
Application or Compatible Series SIMATIC S7-400 and the PS 405/407 power-supply family

DC Input Window

Check both the static and dynamic input-voltage limits against the plant DC system and transient behavior.

Rack Load Budget

Add the 5 V and 24 V backplane demands of every installed S7-400 module before selecting the 4 A supply.

Backup and Protection

Plan optional battery retention, protective-earth connection, isolation and short-circuit behavior as one supply-system design.

Product Overview

Siemens 6ES7405-0DA02-0AA0 is the single-slot PS 405 4 A supply for SIMATIC S7-400 racks. It accepts nominal 24 V, 48 V or 60 V DC plant power and provides isolated, short-circuit-protected backplane power with power-failure buffering and optional battery support.

Operates from nominal 24 V, 48 V or 60 V DC sources and generates the rack’s regulated DC rails. Maintains output for more than 20 ms at a one-second repeat rate and meets NAMUR NE 21 buffering guidance. Provides primary-to-secondary separation, Class I protective-earth construction and short-circuit-protected outputs.

Ordering focus: Confirm the exact DA02 single-slot 4 A DC-input variant and total rack power demand; do not substitute a PS 407 AC-input unit or a higher-current or redundant PS 405 solely by family name..

Key Functions

Multi-Rating DC Conversion

Operates from nominal 24 V, 48 V or 60 V DC sources and generates the rack’s regulated DC rails.

Power-Failure Bridging

Maintains output for more than 20 ms at a one-second repeat rate and meets NAMUR NE 21 buffering guidance.

Isolated Protected Distribution

Provides primary-to-secondary separation, Class I protective-earth construction and short-circuit-protected outputs.

Official Specifications

Static Permissible Input Range 19.2 to 72 V DC
Dynamic Permissible Input Range 18.5 to 75.5 V DC
Rated Input Current 2 A at 24 V DC; 1 A at 48 V DC; 0.8 A at 60 V DC
Maximum Inrush Current 18 A peak; 20 ms full width at half maximum
Rated Output Voltages 5.1 V DC and 24 V DC
Maximum Output Current 4 A on the 5 V rail; 0.5 A on the 24 V rail
Power-Failure Stored-Energy Time More than 20 ms at a 1 s repeat rate; meets NAMUR NE 21
Typical Active Power Input 48 W at 24 V DC
Typical Power Loss 16 W
Maximum Backup Current When Unpowered 100 µA
Optional Backup Batteries 2 × lithium AA, 3.6 V/2.2 Ah in the current Siemens technical data
Required Rack Slots 1
Primary-to-Secondary Isolation Yes
Equipment Protection Class Class I with protective conductor
Overvoltage Category II
Pollution Degree 2
Test Voltages 700 V DC secondary-to-PE; 2,200 V DC primary-to-secondary/PE
Electrical Connection 3 × 1.5 mm² solid or stranded conductors with end sleeves; 3 to 9 mm external cable diameter
Operating Ambient Temperature 0 to 60 °C
Physical Data 25 × 290 × 217 mm (W × H × D); approximately 760 g

Frequently Asked Questions

Which DC supply voltages can feed 6ES7405-0DA02-0AA0?

The module accepts nominal 24 V, 48 V or 60 V DC within a static range of 19.2 to 72 V DC.

How much rack current can 6ES7405-0DA02-0AA0 deliver?

It supplies up to 4 A on the 5 V backplane rail and 0.5 A on the 24 V rail.

Can 6ES7405-0DA02-0AA0 bridge a brief input-voltage dip?

The stored-energy reserve holds the outputs for more than 20 ms at a one-second repeat rate and meets NAMUR NE 21.

Which backup batteries should I fit in 6ES7405-0DA02-0AA0?

Current Siemens technical data specifies two lithium AA cells rated 3.6 V and 2.2 Ah each.

How much rack space does 6ES7405-0DA02-0AA0 require?

The supply occupies one 25 mm-wide rack slot.

Which power cable can I terminate on 6ES7405-0DA02-0AA0?

Use three 1.5 mm² solid or stranded conductors with end sleeves and an overall cable diameter of 3 to 9 mm.

What should I compare before replacing 6ES7405-0DA02-0AA0?

Match the 24/48/60 V DC input class, 4 A backplane rating, single-slot form, protective-earth arrangement and rack load budget.

Compatibility & Ordering Notes

Before ordering 6ES7405-0DA02-0AA0: Confirm the exact DA02 single-slot 4 A DC-input variant and total rack power demand; do not substitute a PS 407 AC-input unit or a higher-current or redundant PS 405 solely by family name..

Compatibility Checklist

  • Confirm that the installed rack is SIMATIC S7-400 and provides one suitable supply slot.
  • Keep plant DC within the 19.2 to 72 V static and 18.5 to 75.5 V dynamic ranges.
  • Keep calculated 5 V and 24 V rack loads below 4 A and 0.5 A.
  • Provide the protective conductor and 3 × 1.5 mm² termination required by the cabinet design.
  • Ensure the upstream supply accommodates the 18 A, 20 ms inrush pulse.
  • Keep ambient temperature within 0 to 60 °C and allow for 16 W of power loss.
  • Match optional batteries to the current exact-revision Siemens value and maintenance plan.
Hot Selling Models
3NA6 830-4KK
ASM456 6GT2002-0ED00
1-1711739-4
N5082413 NH000
ZCKE676 091467
5S1Ö 474894
3RV1021-0KA10
NBN30-L2-E2-V1
08258023
RJ45 7000-74301-7920500
GRLA-M5-QS-3-RS-D
ST4209X1004-KGRO4
3RP2574-1NW30
ME04 00174010
VMPA1-FB-SPU

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.