EN
Siemens SIMATIC S7-300 6ES7354-1AH01-0AE0 FM 354 Positioning Module
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
6ES7354-1AH01-0AE0 FM 354
Official Siemens identification and specifications for 6ES7354-1AH01-0AE0, prepared for accurate replacement matching and quotation.
At a Glance
| Article Number | 6ES7354-1AH01-0AE0 |
|---|---|
| Manufacturer | Siemens |
| Platform | SIMATIC S7-300 |
| Product Type | FM 354 Positioning Module |
| Application | Positioning with servo drives |
| Axes | 1 |
| Configuration | STEP 7 parameter assignment |
| Country of Origin | Germany |
Exact Identification
Match the complete Siemens article number 6ES7354-1AH01-0AE0.
Servo Positioning
One-axis FM 354 positioning module for servo drives.
Compatibility Check
Verify the S7-300 slot, encoder, analog setpoint interface, I/O wiring and parameter data.
Product Overview
6ES7354-1AH01-0AE0 is officially identified by Siemens as the SIMATIC S7-300 FM 354 positioning module for servo drives.
The module supports module replacement without a programming device when the S7-300 project and parameter assignment are correctly retained.
Key Functions
Single-Axis Positioning
Controls one positioning axis with a servo drive.
Encoder and Setpoint Processing
Processes position feedback and outputs the drive setpoint according to the configured axis data.
Parameter-Based Replacement
The stored S7-300 project supports module replacement when the official configuration procedure is followed.
Official Specifications
| Manufacturer | Siemens |
|---|---|
| Series | SIMATIC S7-300 |
| Article Number | 6ES7354-1AH01-0AE0 |
| Product Type | FM 354 Positioning Module |
| Product Designation | FM 354 |
| Application | Positioning with servo drives |
| Number of Axes | 1 |
| Digital Inputs | 4 |
| Digital Outputs | 4 |
| Module Width | 80 mm |
| Dimensions | 80 x 125 x 118 mm |
| Net Weight | Approx. 0.55 kg |
| Engineering Requirement | STEP 7 V3.1 or higher |
| Country of Origin | Germany |
Official source: Siemens Industry Mall product data for 6ES7354-1AH01-0AE0. Commercial stock, warranty and shipping statements are seller terms.
Frequently Asked Questions
What is 6ES7354-1AH01-0AE0?
It is the Siemens SIMATIC S7-300 FM 354 positioning module.
Which drive type is addressed?
Siemens specifies positioning with servo drives.
How many axes are controlled?
The FM 354 is a single-axis positioning module.
Which engineering system is required?
The official product description specifies STEP 7 V3.1 or higher.
Can a module be exchanged without a programming device?
Siemens identifies module exchange without a programming device when the configuration prerequisites are met.
Which data must be retained?
Retain the STEP 7 project, axis parameters, encoder data and I/O assignment.
What should be checked before replacement?
Verify the full article number, S7-300 slot, drive interface, encoder, digital I/O and parameter set.
Compatibility & Ordering Notes
Compatibility Checklist for 6ES7354-1AH01-0AE0
- Match the complete article number 6ES7354-1AH01-0AE0.
- Back up the STEP 7 project and FM 354 parameter data.
- Verify the encoder type, analog setpoint interface and drive wiring.
- Confirm digital input/output assignments and axis commissioning data.
