EN
Siemens SIMATIC S7-300 6ES7318-3EL00-0AB0 CPU 319-3 PN/DP
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
6ES7318-3EL00-0AB0 CPU 319-3 PN/DP
Officially documented SIMATIC S7-300 component for high-performance S7-300 automation with integrated PROFINET and PROFIBUS DP communication.
At a Glance
| Brand / Manufacturer | Siemens |
|---|---|
| Model / Article Number | 6ES7318-3EL00-0AB0 |
| Product Type | CPU 319-3 PN/DP |
| Core Function | Full Siemens article number 6ES7318-3EL00-0AB0 for exact spare-part matching. |
| Application / Compatible Series | SIMATIC S7-300 |
Exact Identification
Match the complete article number 6ES7318-3EL00-0AB0, photographed nameplate and installed firmware or hardware revision before replacement.
Interface Arrangement
Confirm integrated MPI/DP, PROFIBUS DP and Ethernet/PROFINET interfaces used by the installed project.
Configuration Check
Verify STEP 7 V5.4 SP4 or later and a compatible SIMATIC Micro Memory Card before commissioning.
Product Overview
Siemens SIMATIC S7-300 6ES7318-3EL00-0AB0 CPU 319-3 PN/DP is an officially documented SIMATIC S7-300 product designed for high-performance S7-300 automation with integrated PROFINET and PROFIBUS DP communication. Its article number identifies the exact hardware variant and should be matched in full when planning a replacement or spare.
The unit provides integrated MPI/DP, PROFIBUS DP and Ethernet/PROFINET interfaces. Engineering, firmware, memory, rack, field wiring and network settings must be checked against the active project before installation.
Key Functions
Model-specific identification
Full Siemens article number 6ES7318-3EL00-0AB0 for exact spare-part matching.
System role
Designed for high-performance S7-300 automation with integrated PROFINET and PROFIBUS DP communication.
Integrated communication
Provides integrated MPI/DP, PROFIBUS DP and Ethernet/PROFINET interfaces.
Engineering continuity
Check STEP 7 V5.4 SP4 or later and a compatible SIMATIC Micro Memory Card.
Power planning
24 V DC, permissible range 20.4 to 28.8 V; typical power loss 3.5 W
Official Specifications
| CPU / Firmware | CPU 319-3 PN/DP / V2.7 |
|---|---|
| Engineering Software | STEP 7 V5.4 SP4 or later |
| Work Memory | 1.4 MB |
| Retentive Memory | 700 KB |
| Load Memory | SIMATIC Micro Memory Card, up to 8 MB |
| Integrated Interfaces | MPI/DP, PROFIBUS DP, Ethernet/PROFINET |
| Supply Voltage | 24 V DC; 20.4–28.8 V permissible |
| Current Consumption | Typical 100 mA; maximum 650 mA |
| Inrush Current | 2.5 A |
| Power Loss | Typical 3.5 W |
| Dimensions (W × H × D) | 80 × 125 × 130 mm |
| Weight | Approx. 460 g |
Frequently Asked Questions
Which STEP 7 version is required to configure 6ES7318-3EL00-0AB0?
Use STEP 7 V5.4 SP4 or a later supported release for the CPU hardware configuration.
Which load-memory medium is required by 6ES7318-3EL00-0AB0?
A SIMATIC Micro Memory Card is required, with capacities supported up to 8 MB.
Which plant networks can connect directly to 6ES7318-3EL00-0AB0?
The integrated interfaces provide MPI/DP, PROFIBUS DP and Ethernet/PROFINET connectivity.
What 24 V DC supply range is permitted for 6ES7318-3EL00-0AB0?
The permissible input range is 20.4 to 28.8 V DC.
How much working and retentive memory does 6ES7318-3EL00-0AB0 provide?
It provides 1.4 MB work memory, of which 700 KB is retentive.
What project information should be preserved before exchanging 6ES7318-3EL00-0AB0?
Archive the STEP 7 project, interface addresses, PROFINET device data and the Micro Memory Card contents before removal.
What mounting envelope should be allowed for 6ES7318-3EL00-0AB0?
Allow approximately 80 × 125 × 130 mm and a module weight of about 460 g.
Compatibility & Ordering Notes
S7-300 CPU 319-3 PN/DP Replacement Checklist for 6ES7318-3EL00-0AB0
- Compare every character of the nameplate article number.
- Confirm the firmware or hardware revision supported by the engineering project.
- Check rack, connector, memory, power and environmental requirements.
- Record addressing, station names, redundancy and network parameters before removal.
- Keep a verified project backup and follow the official manufacturer installation instructions.
