Siemens SIMATIC IM 174 6ES7174-0AA10-0AA0 PROFIBUS Interface Module
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Confirm each encoder type, supply voltage, cable length and connector assignment.
- Back up the PROFIBUS address and isochronous motion-control parameters.
- Label the analog setpoint and digital I/O wiring before disconnecting the module.
SIEMENS SIMATIC MOTION CONTROL
Siemens SIMATIC IM 174 6ES7174-0AA10-0AA0 PROFIBUS Interface Module
Four-axis IM 174 interface module with isochronous PROFIBUS, four encoder inputs, four analog outputs and high-speed digital I/O.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7174-0AA10-0AA0 |
| Product Type | Motion-control interface module |
| Core Function | Exchanges cyclic axis setpoints and feedback |
| Application | SIMATIC Motion Control systems |
Axis Connections
Confirm all four encoder channels and analog setpoint connections before exchange.
Bus Commissioning
Restore the PROFIBUS address, isochronous configuration and STEP 7 project parameters.
Encoder Compatibility
Match incremental or SSI encoder voltage, frequency, cable length and supply requirements.
Product Overview
The IM 174 links analog drives and stepper drives to a Siemens Motion Control system through isochronous PROFIBUS.
It supports four axes with four encoder connections, four analog setpoint outputs and digital I/O for measuring inputs, reference switches and drive signals.
Key Functions
Four-Axis Drive Interface
Provides four analog setpoint channels and four encoder-feedback connections for motion-control axes.
Isochronous PROFIBUS Coupling
Synchronizes the module with the supported Motion Control system through the X1 PROFIBUS interface.
Incremental and SSI Feedback
Accepts 5 V RS 422 incremental signals and absolute SSI encoder data with specified supplies and cable limits.
Official Specifications
| Drive Channels | 4 |
|---|---|
| Encoder Inputs | 4 |
| Analog Setpoint Outputs | 4 |
| External Supply | 24 V DC; permissible range 20.4 to 28.8 V |
| Incremental Encoder Signal Level | 5 V according to RS 422 |
| Incremental Encoder Supply | 5 V or 24 V, up to 300 mA |
| Maximum Incremental Input Frequency | 1 MHz with a 10 m shielded cable |
| Maximum SSI Data Rate | 1.5 Mbit/s with a 10 m shielded cable |
| SSI Data Rate at 250 m | 187.5 kbit/s maximum |
| Digital Inputs | 10 |
| Digital Input Isolation | Yes |
| Digital Input 0-Signal Range | -3 to +5 V |
| Digital Input 1-Signal Range | 15 to 30 V |
| Typical 0-to-1 Input Delay | 15 µs |
| Typical 1-to-0 Input Delay | 150 µs |
| Status Indicators | SF, BF, TEMP, ON and RDY LEDs |
| Packaging Dimensions | 16.6 × 15.1 × 12.6 cm |
| Net Weight | 0.969 kg |
Frequently Asked Questions
How many axes can I connect through 6ES7174-0AA10-0AA0?
The module provides four encoder channels and four analog setpoint outputs for four axes.
Can 6ES7174-0AA10-0AA0 read SSI absolute encoders?
Yes, the encoder inputs support absolute SSI feedback with the specified transmission rates and cable lengths.
Which supply should I provide to 6ES7174-0AA10-0AA0?
Use a 24 V DC supply within the permissible 20.4 to 28.8 V range.
What PROFIBUS settings should I preserve for 6ES7174-0AA10-0AA0?
Record the bus address, isochronous timing and project configuration before removing the module.
Can I connect a 5 V incremental encoder to 6ES7174-0AA10-0AA0?
Yes, the position inputs accept 5 V RS 422 incremental signals.
Which STEP 7 version is specified for configuring 6ES7174-0AA10-0AA0?
The official product description specifies STEP 7 V5.4 SP4 for configuration.
What wiring should I record before replacing 6ES7174-0AA10-0AA0?
Record the four encoder plugs, analog setpoints, digital I/O, 24 V supply and PROFIBUS connection.