EN
Siemens SIMATIC ET 200S 6ES7151-7AA20-0AB0 IM 151-7 CPU Interface Module
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Use the module only in an approved SIMATIC ET 200S PROFIBUS station.
- Preserve the DP address, parameter set and physical module order during replacement.
- Restore the approved Micro Memory Card and check every station diagnostic before operation.
Siemens · SIMATIC ET 200S
6ES7151-7AA20-0AB0 IM 151-7 CPU Interface Module
Siemens 6ES7151-7AA20-0AB0 is the SIMATIC ET 200S IM 151-7 CPU interface module with 96 KB work memory, removable Micro Memory Card load memory and an integrated PROFIBUS DP slave interface.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7151-7AA20-0AB0 |
| Product Type | Distributed I/O interface module with integrated CPU |
| Core Function | Combines ET 200S station control with an integrated PROFIBUS DP slave interface |
| Application or Compatible Series | SIMATIC ET 200S PROFIBUS stations |
Engineering Baseline
Use STEP 7 V5.4 SP3 or a compatible STEP 7 V5.2 SP1 installation with the required HSP.
Memory Transfer
Move the approved SIMATIC Micro Memory Card and preserve the complete station project.
PROFIBUS Station
Retain the DP address, baud rate, diagnostics and ET 200S module order.
Product Overview
Siemens 6ES7151-7AA20-0AB0 is the SIMATIC ET 200S IM 151-7 CPU interface module with 96 KB work memory, removable Micro Memory Card load memory and an integrated PROFIBUS DP slave interface.
Executes the local automation program directly in the distributed station. Connects the station to the higher-level DP master as an intelligent slave. Uses a SIMATIC Micro Memory Card for load memory and data retention.
Key Functions
Integrated ET 200S CPU
Executes the local automation program directly in the distributed station.
PROFIBUS DP Interface
Connects the station to the higher-level DP master as an intelligent slave.
Maintenance-Free Program Backup
Uses a SIMATIC Micro Memory Card for load memory and data retention.
Official Specifications
| Hardware Version | 01 |
|---|---|
| Firmware Version | V2.6 |
| Engineering Software | STEP 7 V5.4 SP3 or STEP 7 V5.2 SP1 with HSP |
| Integrated Work Memory | 96 KB |
| Retentive Data-Block Capacity | 64 KB |
| Load Memory | SIMATIC Micro Memory Card up to 8 MB |
| Memory-Card Data Retention | At least 10 years after final programming |
| Bit Operation Time | Minimum 0.1 µs |
| Word Instruction Time | Minimum 0.2 µs |
| Fixed-Point Operation Time | Minimum 2.0 µs |
| Floating-Point Operation Time | Minimum 3.0 µs |
| S7 Counters | 256 |
| Integrated Fieldbus Interface | PROFIBUS DP |
| DP Operating Role | Intelligent DP slave |
Frequently Asked Questions
Which STEP 7 release should I use with 6ES7151-7AA20-0AB0?
Use STEP 7 V5.4 SP3 or an approved V5.2 SP1 installation with the matching hardware support package.
How much work memory is available in 6ES7151-7AA20-0AB0?
The integrated CPU provides 96 KB of non-expandable work memory.
Which memory card fits 6ES7151-7AA20-0AB0?
Use an approved SIMATIC Micro Memory Card with a capacity of up to 8 MB.
Can 6ES7151-7AA20-0AB0 operate as a PROFIBUS master?
Its integrated fieldbus connection is intended for operation as an intelligent DP slave.
What should I back up before replacing 6ES7151-7AA20-0AB0?
Save the STEP 7 project, DP parameters, retentive data and complete ET 200S module configuration.
How should I commission 6ES7151-7AA20-0AB0 after installation?
Restore the approved memory card and project, then verify the station address, module order and DP diagnostics.
What compatibility checks matter before ordering 6ES7151-7AA20-0AB0?
Compare the firmware, STEP 7 catalog support, Micro Memory Card and installed ET 200S hardware sequence.
