Siemens SIMATIC ET 200S 6ES7131-4BB01-0AA0 2 DI Module
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Confirm on nameplate
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
6ES7131-4BB01-0AA0 2 DI Standard 24 V DC electronic module
Official Siemens identification and technical data for 6ES7131-4BB01-0AA0, prepared for accurate replacement matching and quotation.
At a Glance
| Article Number | 6ES7131-4BB01-0AA0 |
|---|---|
| Manufacturer | Siemens |
| Platform | SIMATIC ET 200S |
| Product Type | 2 DI Standard 24 V DC electronic module |
| Country of Origin | Confirm on nameplate |
Exact Identification
Match the complete Siemens article number 6ES7131-4BB01-0AA0 and the photographed hardware revision.
Official Configuration
Provides two 24 V DC digital inputs with IEC 61131 type 1 input characteristic.
Configuration Check
Verify ratings, terminals, system compatibility and revision before replacement.
Product Overview
6ES7131-4BB01-0AA0 is officially identified by Siemens as SIMATIC ET 200S electronic module with two standard 24 V DC digital inputs in a 15 mm housing; supplied as five modules per packing unit.
The complete article number 6ES7131-4BB01-0AA0 should be matched against the installed hardware, nameplate and official project documentation. Similar products can differ in electrical ratings, interfaces, terminal design, packing quantity or approved system use.
Key Functions
Model-Specific Configuration
6ES7131-4BB01-0AA0: Provides two 24 V DC digital inputs with IEC 61131 type 1 input characteristic.
System Interface
6ES7131-4BB01-0AA0: Siemens specifies +15 to +30 V for signal 1 and -30 to +5 V for signal 0.
Replacement Control
6ES7131-4BB01-0AA0: The module is 15 mm wide and is supplied as five units per packing unit.
Official Specifications
| Manufacturer | Siemens |
|---|---|
| Series | SIMATIC ET 200S |
| Article Number | 6ES7131-4BB01-0AA0 |
| Product Type | 2 DI Standard 24 V DC electronic module |
| Module Type | 2 DI Standard electronic module |
| Digital Inputs | 2 |
| Rated Input Voltage | 24 V DC |
| Input Characteristic | IEC 61131 type 1 |
| Signal 0 Range | -30 to +5 V |
| Signal 1 Range | +15 to +30 V |
| Typical Input Current | 7 mA at 24 V |
| Module Width | 15 mm |
| Packing Quantity | 5 modules |
Frequently Asked Questions
Which ET 200S stations can use 6ES7131-4BB01-0AA0?
It is designed as a digital electronic module for the SIMATIC ET 200S distributed I/O system and is installed with the appropriate ET 200S terminal and power-module arrangement.
What type of field signals can be connected to 6ES7131-4BB01-0AA0?
Two standard 24 V DC digital input signals are supported, with input characteristics according to IEC 61131 Type 1.
Which voltage levels are interpreted as 0 and 1 by 6ES7131-4BB01-0AA0?
For each input, -30 to +5 V is recognized as signal 0, while +15 to +30 V is recognized as signal 1.
Can the input delay of 6ES7131-4BB01-0AA0 be parameterized during commissioning?
No. The standard input delay is fixed; Siemens specifies 2 ms minimum, typically 3 ms, and 4.5 ms maximum for both signal transitions.
How should 6ES7131-4BB01-0AA0 be supplied in an ET 200S assembly?
The module uses 24 V DC from the ET 200S power module and includes reverse-polarity protection.
What cable lengths can be used with 6ES7131-4BB01-0AA0?
Siemens specifies up to 1,000 m for shielded wiring and up to 600 m for unshielded wiring.
How much process-image address space does 6ES7131-4BB01-0AA0 require?
One byte is the maximum address space per module; when packing is used, the two input channels occupy 2 bits.
Compatibility & Ordering Notes
Compatibility Checklist for 6ES7131-4BB01-0AA0
- Match the complete article number 6ES7131-4BB01-0AA0 without shortening the suffix.
- Confirm the installed SIMATIC ET 200S system and hardware revision.
- Verify: Provides two 24 V DC digital inputs with IEC 61131 type 1 input characteristic.
- Confirm included terminals, connectors and accessories in the written quotation.