Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens simatic et 200eco 6es7142 3bh00 0xa0 16 do module-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens SIMATIC ET 200eco 6ES7142-3BH00-0XA0 16 DO Module

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Product Overview
  • Key Functions
  • Official Specifications
  • Frequently Asked Questions
  • Compatibility & Ordering Notes
  • Hot Selling Models
  • Recommended Products
Overview
SIEMENS SIMATIC ET 200ECO · DIGITAL OUTPUT MODULE

SIMATIC ET 200eco 6ES7142-3BH00-0XA0 16-DO Module

ET 200eco basic module BM 142 with sixteen 24 V DC digital outputs, 0.5 A rated output current, eight M12 connections and IP65/IP67 protection.

At a Glance

Brand / Manufacturer Siemens
Model / Article Number 6ES7142-3BH00-0XA0
Product Type ET 200eco digital output basic module
Core Function Controls sixteen 24 V DC field outputs rated at 0.5 A
Application / Compatible Series SIMATIC ET 200eco PROFIBUS DP remote I/O
Output Protection
Short-circuit protection is provided per channel.
Field Wiring
Eight 4/5-pin M12 circular connectors with duplicate assignment.
Network Integration
PROFIBUS DP communication up to 12 Mbit/s.
Product Overview

6ES7142-3BH00-0XA0 is officially identified by Siemens as SIMATIC ET 200eco peripheral module with 16 digital outputs, 0.5 A per output and 24 V DC rated load voltage.

The complete article number 6ES7142-3BH00-0XA0 should be matched against the installed hardware, nameplate and official project documentation. Similar products can differ in electrical ratings, interfaces, connector design or approved system use.

Ordering focus: provide the installed 6ES7142-3BH00-0XA0 nameplate, hardware revision and cabinet or field configuration for quotation verification.
Key Functions

Model-Specific Configuration

6ES7142-3BH00-0XA0: Provides 16 digital outputs rated at 0.5 A per channel.

System Interface

6ES7142-3BH00-0XA0: Uses a nominal 24 V DC load supply.

Replacement Control

6ES7142-3BH00-0XA0: Designed for loads such as solenoid valves, DC contactors and indicator lamps, with eight field connection sockets serving channels 0 to 15.

Official Specifications
Vendor Identification 80FBh
Rated Supply Voltage 1L+ 24 V DC
Rated Load Voltage 2L+ 24 V DC
Current from 1L+ 70 mA typical
Current from 2L+ Without Load 80 mA typical
Typical Power Loss 4 W
Short-Circuit Response Threshold 1.4 A per channel
Inductive Shutdown Voltage Limitation 2L+ (-47 V)
Lamp Load, Maximum 5 W
Load Resistance Range 12 Ω to 4 kΩ
Signal 1 Output Voltage, Minimum 2L+ (-0.8 V)
Permissible Signal 1 Current 5 mA to 1 A at 0 °C to 55 °C
Signal 0 Residual Current, Maximum 0.1 mA
Switching Frequency 100 Hz resistive; 0.5 Hz inductive; 1 Hz lamp load
Total Output Current per Group 4 A maximum up to 55 °C
Unshielded Cable Length, Maximum 30 m
PROFIBUS DP Transfer Rate Up to 12 Mbit/s
Isolation Test Voltage 500 V DC
Dimensions 60 × 210 × 28 mm
Weight Approximately 210 g
Official source: Siemens Industry Mall technical data for 6ES7142-3BH00-0XA0. Technical values shown above are limited to the official Siemens product data.
Frequently Asked Questions

Which connection block is required for 6ES7142-3BH00-0XA0?

Order the compatible 6ES7194-3AA00-0.A0 connection block separately.

What field loads can be connected to 6ES7142-3BH00-0XA0?

Use 24 V DC loads within the channel and group-current limits; lamp loads are limited to 5 W.

Does 6ES7142-3BH00-0XA0 provide short-circuit protection?

Yes. The typical response threshold is 1.4 A per channel.

Can two outputs of 6ES7142-3BH00-0XA0 be used for redundant load control?

Redundant control is supported, but parallel connection for increasing output current is not.

What switching frequencies apply to 6ES7142-3BH00-0XA0?

Maximum values are 100 Hz for resistive loads, 0.5 Hz for inductive loads and 1 Hz for lamp loads.

How is 6ES7142-3BH00-0XA0 integrated into the fieldbus?

It communicates through PROFIBUS DP at rates up to 12 Mbit/s.

What installation conditions protect 6ES7142-3BH00-0XA0 in the field?

Use the specified M12 connections, observe the 30 m unshielded cable limit and assemble the station to maintain IP65/IP67.

Compatibility & Ordering Notes
Before ordering 6ES7142-3BH00-0XA0: compare the full article number, hardware revision, official Siemens configuration, electrical ratings, connectors and any required accessories.

Compatibility Checklist for 6ES7142-3BH00-0XA0

  • Match the complete article number 6ES7142-3BH00-0XA0 without shortening the suffix.
  • Confirm the installed SIMATIC ET 200eco family and hardware revision.
  • Verify: Provides 16 digital outputs rated at 0.5 A per channel.
  • Confirm included connectors and accessories in the written quotation.
Hot Selling Models
037H005532
047H0213
WRT-822B/62
514.001.113 MCP250M
WP-700-EB
SB-3SBXS-WL
BUF-2A
HDA063Z
BZME1-A63-BT
WL800/8/3M/ICEL
K1401M
MPW-6 RS-232
TBS100
Allen Bradley 1734-IE2C+OB4+IB8
ABB 1SDA054911R1

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.