Siemens SCALANCE X307-3 6GK5307-3BL00-2AA3 Managed Industrial Ethernet Switch
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Match every endpoint to the correct 10/100 Mbit/s RJ45 or 1 Gbit/s multimode SC interface.
- Keep each optical link within the 750 m limit and verify the complete multimode fiber budget.
- Provide SELV 24 V DC within the permitted voltage range and wire the signaling contact within its rating.
- Preserve VLAN, multicast, redundancy, PROFINET device-name and IP settings before replacement.
- Match the installed hardware revision to its permitted operating-temperature range.
- Use firmware V3.7.0 or later when PRP compatibility is required.
- Keep a compatible C-PLUG installed when SSH public-key authentication is part of the security configuration.
Siemens · SCALANCE X-300
6GK5307-3BL00-2AA3 SCALANCE X307-3 Managed Industrial Ethernet Switch
Siemens 6GK5307-3BL00-2AA3 is a SCALANCE X307-3 managed Industrial Ethernet switch with seven 10/100 Mbit/s RJ45 ports and three 1 Gbit/s multimode SC optical ports for mixed copper-and-fiber network topologies.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6GK5307-3BL00-2AA3 |
| Product Type | Managed Industrial Ethernet Switch |
| Core Function | Segments and manages mixed copper and fiber industrial networks |
| Application or Compatible Series | Industrial Ethernet and PROFINET installations requiring Fast Ethernet access and Gigabit multimode uplinks |
Hybrid Port Layout
Seven electrical Fast Ethernet ports connect local devices while three optical Gigabit ports provide multimode fiber uplinks.
Fiber Link Planning
The SC interfaces support multimode links up to 750 m when the approved optical budget and cable are maintained.
Managed Deployment
Preserve PROFINET, redundancy, VLAN, multicast and management settings before replacing an installed switch.
Product Overview
Siemens 6GK5307-3BL00-2AA3 is a SCALANCE X307-3 managed Industrial Ethernet switch with seven 10/100 Mbit/s RJ45 ports and three 1 Gbit/s multimode SC optical ports for mixed copper-and-fiber network topologies.
The switch joins 10/100 Mbit/s copper segments to three 1 Gbit/s optical backbone connections. MRP, RSTP, VLAN and IGMP functions support managed and redundant industrial topologies. An optional C-PLUG retains compatible configuration data for controlled equipment replacement.
Key Functions
Copper-to-Fiber Switching
The switch joins 10/100 Mbit/s copper segments to three 1 Gbit/s optical backbone connections.
Network Segmentation and Resilience
MRP, RSTP, VLAN and IGMP functions support managed and redundant industrial topologies.
Transferable Device Configuration
An optional C-PLUG retains compatible configuration data for controlled equipment replacement.
Official Specifications
| Copper Network Interfaces | 7 × 10/100 Mbit/s RJ45 electrical ports |
|---|---|
| Optical Network Interfaces | 3 × 1000 Mbit/s SC ports for multimode glass fiber |
| Maximum Optical Link Length | 750 m |
| Power Supply | 24 V DC SELV; 19.2 to 28.8 V DC, or 18 to 32 V DC including total ripple |
| Current Consumption and Power Loss | 400 mA at 24 V DC; 9.6 W |
| Input Overcurrent Protection | 3 A / 32 V non-replaceable fuse |
| Signaling Contact | 24 V DC, 100 mA maximum resistive load; resistance between F1 and F2 below 8 Ω |
| Plug-In Terminal Blocks | 1 × 4-pin for power and 1 × 2-pin for the signaling contact |
| Optical Transmitter Output | −9.5 to −4 dBm |
| Optical Receiver Limits | −17 dBm minimum sensitivity; −3 dBm maximum input power |
| Switching Method and Latency | Store and forward; 5 µs |
| Address Table and Aging | Up to 8000 learnable addresses; 30 s aging time |
| Redundancy Reconfiguration | HRP 300 ms, standby coupling 300 ms and MRP 200 ms |
| Dimensions and Weight | 120 × 125 × 123 mm; 1400 g |
| Degree of Protection | IP30 |
| Operating Temperature by Hardware Revision | Version 1: 0 to +60 °C; version 2 onward: −10 to +60 °C |
| Storage, Transport and Humidity | −40 to +70 °C; below 95% relative humidity at 25 °C without condensation |
| Altitude Temperature Derating | Maximum +55 °C from 2000 m and +50 °C from 3000 m |
| Mean Time Between Failures | 40 years at 40 °C |
| Installation Options | DIN rail, S7-300 standard rail or wall; 35 mm DIN-rail installation is not permitted in shipbuilding |
Frequently Asked Questions
Which network ports are available on 6GK5307-3BL00-2AA3?
The switch provides seven 10/100 Mbit/s RJ45 ports and three 1 Gbit/s multimode SC ports.
How far can the optical links from 6GK5307-3BL00-2AA3 run?
Each multimode SC interface supports a fiber distance of up to 750 m within the approved optical budget.
Which supply should I wire to 6GK5307-3BL00-2AA3?
Use a 24 V DC source that remains within the permitted 18 to 32 V DC range.
How quickly can 6GK5307-3BL00-2AA3 recover an MRP ring?
The specified MRP reconfiguration time is 200 ms.
Which firmware does 6GK5307-3BL00-2AA3 need for PRP compatibility?
PRP compatibility is listed from firmware V3.7.0.
Can I use SSH public-key authentication on 6GK5307-3BL00-2AA3 without a C-PLUG?
A C-PLUG must be inserted when SSH public-key authentication is used on the switch.
Which mounting methods are available for 6GK5307-3BL00-2AA3?
The unit can be mounted on a DIN rail, an S7-300 standard rail or a wall, with the stated shipbuilding restriction for 35 mm DIN rails.