Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens qbm81 3 differential pressure switch 20 300 pa-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens QBM81-3 Differential Pressure Switch, 20–300 Pa

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
SIEMENS Symaro QBM81

QBM81-3 Differential Pressure Switch, 20–300 Pa

An adjustable 20–300 Pa pressure switch for air and nonaggressive gases, supplied with a mounting bracket, duct adaptors and tubing.

At a Glance

Brand Siemens
Model QBM81-3
Product Type Adjustable differential pressure switch
Core Function Switches an electrical contact in response to air-pressure difference
Application HVAC air-filter, airflow and fan-belt monitoring

Low-pressure switching

Set the upper switching point within the 20–300 Pa range.

Changeover contact

A single-pole changeover switch provides lower- and higher-pressure contact states.

Duct connection kit

Two duct adaptors and 2 m of tubing are supplied with the switch.

Product Overview

QBM81-3 uses a spring-loaded diaphragm to operate a changeover contact when the pressure difference reaches the selected switching point.

The switch supports filter and airflow supervision in ventilation systems and can detect a torn fan belt through the associated change in pressure; the setpoint knob is located beneath the cover.

Ordering focus: Select the pressure range, contact load and mounting orientation, then route the pressure tubing upward toward the switch without loops.
Key Functions

Adjustable pressure supervision

An engraved scale and setpoint knob allow the upper switching point to be selected between 20 and 300 Pa.

Filter and fan monitoring

Connect the positive port upstream and the negative port downstream of a filter, or use the fan-side pressure connections for airflow monitoring.

Automatic contact reset

The single-pole changeover mechanism resets automatically and has a factory-set switching differential.

Official Specifications
Adjustable pressure range 20–300 Pa (0.2–3 mbar)
Switch construction Single-pole changeover; multi-layer contact
Minimum contact load 0.01 A at 24 V AC/DC
Maximum resistive contact load 5 A at 250 V AC
Maximum inductive contact load 3 A at 250 V AC; cos φ > 0.6
Switching differential and reset Factory-set differential; automatic reset
Mechanical switching life More than 1,000,000 cycles
Switching-point reproducibility Better than ±2.5 Pa over the 20–300 Pa range
Maximum unilateral overload at −30 to +75 °C 7,500 Pa
Maximum unilateral overload at −30 to +85 °C 5,000 Pa
Housing protection IP54
Operating ambient temperature −30 to +85 °C
Storage temperature −40 to +85 °C
Ambient humidity Less than 90% RH, non-condensing
Electrical connection Three screw terminals; PG11 cable gland
Pressure connection outside diameter 6.2 mm
Housing and cover materials Glass-fiber-reinforced polycarbonate housing; polycarbonate cover
Diaphragm material Silicone, low-swell and emission-free
Horizontal mounting setpoint shift Cover upward: +11 Pa; cover downward: −11 Pa
Weight including packaging 0.19 kg with mounting bracket
Frequently Asked Questions

Which pressure range can be adjusted on QBM81-3?

The upper switching point is adjustable from 20 to 300 Pa using the knob beneath the cover.

How should the two pressure lines be connected to QBM81-3 for filter monitoring?

Connect the higher-pressure port upstream of the filter and the lower-pressure port downstream.

Will horizontal installation change the setpoint of QBM81-3?

Relative to the vertically calibrated scale, the switching point rises by 11 Pa with the cover upward and falls by 11 Pa with the cover downward.

Can the pressure tubing for QBM81-3 be longer than two metres?

Longer tubing is permitted, but tubing beyond two metres increases the response time.

Which duct connection parts are delivered with QBM81-3?

The supplied connection kit contains two duct adaptors, four fixing screws and two metres of tubing.

Does QBM81-3 need an external protective device for its supply wiring?

External preliminary protection is required because the switch has no internal fuse.

Which contact pair indicates the higher-pressure state on QBM81-3?

Terminals 1 and 3 close for the higher-pressure state, while terminals 1 and 2 correspond to the lower-pressure state.

Compatibility & Ordering Notes
Before ordering QBM81-3: Match the 20–300 Pa setpoint range to the required alarm threshold, allow for orientation-dependent calibration shifts and select contact-circuit protection suitable for the connected load.

Compatibility Checklist for QBM81-3

  • Use air or nonaggressive gases within the permissible pressure and temperature limits.
  • Prefer vertical mounting for direct correspondence with the calibrated scale.
  • Mount above the pressure takeoff points and route tubing upward without loops.
  • Observe contact voltage, resistive or inductive current ratings and external protection requirements.
  • Use the supplied FK-PZ3 kit or select additional duct probes separately.
Hot Selling Models
6SE6400-0BE00-0AA0
6AV1202-0AA00
ADVU-40-25-PA
281-684 51129487
IFO218010ZNKG
OT00591A4
DILM32-XTED11-1
Eupec T175N22E0C51
10A4.2X027
G1/2
LP1D5011
1492-ACABLE010X
6ES5312-5AA12
Z928 071857
56.404.9855.0 WKI 4 DD-SL/V0

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.