Siemens GEB161.1E OpenAir Modulating Damper Actuator
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Use the low-voltage AC or DC supply within the specified tolerance and approval limits.
- Set the control-signal range, rotation direction and self-adaptation for the damper travel.
- Match the shaft dimensions, minimum insertion length and maximum hardness.
- Provide the required mounting arrangement for IP54 protection and keep the installation weather protected.
GEB161.1E OpenAir Modulating Damper Actuator
20 Nm modulating damper actuator with DC 0/2–10 V positioning, electrical position feedback and automatic adaptation of the rotation range.
At a Glance
| Brand | Siemens |
|---|---|
| Model | GEB161.1E |
| Product Type | Non-spring-return rotary actuator |
| Core Function | Modulating air-damper positioning |
| Application | Ventilation and air-conditioning dampers |
Modulating positioning
A DC 0/2–10 V input controls the damper angle and a voltage output reports position.
Automatic travel adaptation
Self-adaptation maps the positioning characteristic to the mechanical end positions.
Manual and mechanical adjustment
The gear-disengagement button permits manual positioning and the mechanical stop limits the rotation span.
Product Overview
GEB161.1E positions ventilation and air-conditioning dampers using a DC 0/2–10 V command signal.
The actuator provides a 20 Nm nominal torque, adjustable rotation stops and a disengagement button for manual movement; the non-spring-return drive holds its position when power is removed.
Key Functions
Modulating positioning
A DC 0/2–10 V input controls the damper angle and a voltage output reports position.
Automatic travel adaptation
Self-adaptation maps the positioning characteristic to the mechanical end positions.
Manual and mechanical adjustment
The gear-disengagement button permits manual positioning and the mechanical stop limits the rotation span.
Official Specifications
| Operating Supply | 24 V AC ±20% or 24–48 V DC ±20%; cUL DC limit 30 V |
|---|---|
| Supply Frequency | 50/60 Hz |
| Operating and Holding Consumption | 1.9 VA / 1.2 W while positioning; 0.6 W holding |
| Nominal and Holding Torque | 20 Nm |
| Maximum Blocked Torque | 35 Nm |
| Rotation Angle | 90° nominal; 95° ±2° maximum |
| Positioning Time for 90° | 150 s |
| Control Input | 0/2–10 V DC; input resistance greater than 100 kΩ |
| Electrical Position Feedback | 0–10 V DC; maximum ±1 mA |
| Connection Cable | 0.9 m; 0.75 mm² conductors |
| Maximum Signal-Wire Length | 300 m |
| Operating Temperature | −32 to +55 °C |
| Maximum Relative Humidity | Below 95%, non-condensing |
| Degree of Protection | IP54, subject to mounting arrangement |
| Round Shaft Diameter | 8–20.5 mm |
| Square Shaft Dimension | 8–14.5 mm, diagonal |
| Minimum Shaft Length | 20 mm |
| Maximum Shaft Hardness | Below 300 HV |
Frequently Asked Questions
Will GEB161.1E spring back when the supply fails?
The non-spring-return actuator remains in its deployed position when power is lost.
Can I select either a 0–10 V or 2–10 V command for GEB161.1E?
The modulating input supports DC 0/2–10 V positioning signals.
Can I monitor the damper position from GEB161.1E?
An electrical position output provides a 0–10 V DC feedback signal.
How do I move the damper manually with GEB161.1E?
Press the gear-train disengagement button to adjust the actuator manually.
Can GEB161.1E adapt to a mechanically restricted travel range?
Self-adaptation determines the mechanical end positions and maps the positioning characteristic to that range.
Which round shafts fit GEB161.1E?
The self-centering connection accepts round shafts from 8 to 20.5 mm in diameter with at least 20 mm of shaft length.
Can I add auxiliary switches inside GEB161.1E later?
Auxiliary switches and feedback potentiometers cannot be retrofitted into the actuator.