Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens d445 2dp pn simotion d445 2 dp pn motion control unit-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens D445-2DP/PN SIMOTION D445-2 DP/PN Motion Control Unit

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
SIMOTION D4x5-2

D445-2DP/PN SIMOTION D445-2 DP/PN Motion Control Unit

SIMOTION motion controller with integrated SINAMICS drive control, six DRIVE-CLiQ interfaces and onboard PROFINET and PROFIBUS communication.

At a Glance

Brand Siemens
Model D445-2DP/PN
Product Type Drive-based motion controller
Core Function Coordinated motion, logic and integrated drive control
Application SINAMICS S120 motion-control systems

Integrated motion and drives

The integrated drive control supports up to six servo axes, six vector axes or twelve V/f axes as alternative configurations.

Multiple network interfaces

PROFINET, PROFIBUS, Industrial Ethernet and DRIVE-CLiQ link the controller to its drive and automation system.

Retentive and removable storage

Retentive process data and the CompactFlash medium support restart and project-data handling.

Product Overview

D445-2DP/PN combines motion control, PLC logic and integrated SINAMICS drive control in a drive-based controller.

The DP/PN version provides an onboard three-port PROFINET interface, two PROFIBUS interfaces and six DRIVE-CLiQ connections, with CompactFlash storage for system and project data.

Ordering focus: Match the SIMOTION software release, S120 drive layout, CompactFlash medium and mandatory double fan/battery module.
Key Functions

Integrated motion and drives

The integrated drive control supports up to six servo axes, six vector axes or twelve V/f axes as alternative configurations.

Multiple network interfaces

PROFINET, PROFIBUS, Industrial Ethernet and DRIVE-CLiQ link the controller to its drive and automation system.

Retentive and removable storage

Retentive process data and the CompactFlash medium support restart and project-data handling.

Official Specifications
Controller supply 24 V DC PELV; permitted range 20.4–28.8 V
Typical supply current 1.9 A at 24 V, without I/O loads or 24 V supply through DRIVE-CLiQ/PROFIBUS
Typical startup current 5 A under the stated unloaded-interface conditions
Typical power loss 46 W without I/O loads or 24 V supply through DRIVE-CLiQ/PROFIBUS
Integrated drive capacity 6 servo / 6 vector / 12 V/f axes, alternative configurations
DRIVE-CLiQ interfaces 6
Onboard PROFINET 1 interface with 3 ports; IO controller and/or device, RT/IRT
PROFIBUS interfaces 2; DP master or slave and isochronous operation
Industrial Ethernet interfaces 2
Optional second PROFINET interface CBE30-2 communication board with 4 ports
Retentive memory 512 KB
Working memory by software release 196 MB as of V5.4 SP3; 190 MB as of V5.3 SP1
RAM disk 68 MB as of V5.3 SP1
Diagnostic buffer 200 SIMOTION messages and 200 SINAMICS Integrated messages
Minimum PROFINET send cycle 0.25 ms
Minimum servo/interpolator cycle 0.25 ms as of V4.5; 0.5 ms up to V4.4
Cooling requirement Double fan/battery module required
Enclosure protection IP20; pollution degree 2
Dimensions without fan/battery module 50 × 380 × 270 mm with spacers; 50 × 380 × 230 mm without spacers for external cooling
Unpacked controller weight Approximately 4.3 kg
Frequently Asked Questions

Can D445-2DP/PN start without its double fan/battery module?

The controller requires the double fan/battery module and will not start without it.

How many ports are provided by the onboard PROFINET interface of D445-2DP/PN?

The onboard PROFINET interface has three ports.

Can I add a second PROFINET interface to D445-2DP/PN?

The optional CBE30-2 board provides a second PROFINET interface with four ports.

What supply-current figure applies to an unloaded D445-2DP/PN?

The typical current is 1.9 A at 24 V with no I/O loads and no 24 V supply through DRIVE-CLiQ or PROFIBUS.

How many servo axes can the integrated drive control of D445-2DP/PN handle?

The integrated drive control supports up to six servo axes as its servo-control configuration.

When may I remove the mounting spacers from D445-2DP/PN?

The spacers may be removed for the external-air-cooling installation in which the cooling fins pass through the rear cabinet panel.

How much retentive memory is available on D445-2DP/PN?

The controller provides 512 KB of retentive memory.

Compatibility & Ordering Notes
Before ordering D445-2DP/PN: Match the SIMOTION software release, S120 drive layout, CompactFlash medium and mandatory double fan/battery module.

Before installation

  • Use the SIMOTION project and firmware release appropriate to the installed controller.
  • Include the mandatory double fan/battery module and allow the required ventilation space.
  • Select the CompactFlash card and runtime licenses for the intended application.
  • Include all external interface loads when sizing the 24 V supply.
Hot Selling Models
B&R X20 DO 9322
BAE009E BAE SA-CS-001-PS
DYSW-10-17-Y1F
3NA7240 NH2
CEM-A-LH10K-S3
1-N IRG1-N
3RV2011-1AA15
CDQMB40TF25
96M-1080-T2-45
RV1001.1/0
IG5718 IGE2005-FRKG
6ES5318-8MB11
3RV2011-1EA15
MT2834BLG
FAZ-B6/3-NA

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.