Siemens 6SL3262-1AC00-0DA0 SINAMICS G120 FSC Shield Connection Kit
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Match both the Power Module family and frame size FSC.
- Use the separate Control Unit shield kit where the controller’s signal connections require it.
- Clamp cable shields over a broad conductive contact area.
- Place the shield connection near the cabinet cable entry and keep cable runs short.
- Route motor cables separately from sensitive signal and motor temperature-sensor cables.
6SL3262-1AC00-0DA0 SINAMICS G120 FSC Shield Connection Kit
A frame-size FSC shield connection set for the supported PM240 and PM250 Power Modules, with a shield plate and mounting clamps.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6SL3262-1AC00-0DA0 |
| Product Type | Power-module shield connection kit |
| Core Function | Supports cable shielding and strain relief |
| Application | SINAMICS G120 cabinet installations |
Frame size FSC
The kit is selected for the FSC Power Module frame.
Power-module shielding
The shield plate provides the termination point for cable shields.
Mechanical support
Mounting clamps and retaining elements provide cable strain relief.
Product Overview
6SL3262-1AC00-0DA0 is the frame-size FSC shield connection kit for the supported SINAMICS G120 PM240 and PM250 Power Modules.
The kit provides a shield connection plate and mounting elements for the cable shields, combining a broad electrical shield contact with mechanical strain relief at the Power Module.
Key Functions
Cable-shield termination at the Power Module
The shield connection plate provides a local support point for the line and motor cable shielding arrangement of the supported Power Module.
Mechanical cable strain relief
The supplied connection elements and clamps support the connected cables so mechanical forces are handled at the mounting assembly.
Integration with the cabinet EMC layout
The cable shield is connected through a large conductive contact area, alongside the cabinet’s short cable routes, grounded mounting surfaces and separation of motor and sensitive signal cables.
Official Specifications
| Matched Frame Size | FSC |
|---|---|
| Shield Support Component | Power-module shield connection plate |
| Clamping Assembly | Connecting and retaining elements with cable clamps |
| Net Weight | 0.63 kg |
| Cable Shielding Scope | Line supply cables and motor cables |
| Additional Installed Height on PM240 FSC | 77 mm |
| Additional Installed Height on PM250 FSC | 89 mm |
| Auxiliary Mechanical Mounting | Mounting provision for the motor holding-brake relay on the shield connection kit |
Frequently Asked Questions
Which Power Module frame is matched to 6SL3262-1AC00-0DA0?
The kit is selected for frame size FSC of the supported PM240 and PM250 Power Modules.
Is 6SL3262-1AC00-0DA0 the shield kit for a G120 Control Unit?
This is a Power Module accessory, while Control Units use their separately selected shield-connection kits.
Does 6SL3262-1AC00-0DA0 also provide mechanical cable support?
The kit provides mechanical strain relief as well as a support point for cable shield termination.
How should I connect the cable shield to the plate when fitting 6SL3262-1AC00-0DA0?
Clamp the cable shield to the plate through the largest practical conductive contact area.
Should the shield connection made with 6SL3262-1AC00-0DA0 be placed far from the cabinet cable entry?
Connect cable shields as close as possible to the point where the cable enters the cabinet.
Can I route the shielded motor cable beside temperature-sensor wiring when installing 6SL3262-1AC00-0DA0?
Route the shielded motor cable separately from the motor temperature-sensor cables.
Is 6SL3262-1AC00-0DA0 automatically included with every PM240 or PM250?
For PM240 and PM250 Power Modules, the shield connection kit is an optional component ordered separately.