Siemens 6SL3244-0SA01-1AA1 ET 200S FC ICU24F Fail-Safe Control Unit
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Verify the hardware/software revision against the installed drive configuration; the Siemens certificate lists hardware A01/A02 with safety software 03.00.49.00 for this order number.
- Use the specified TM-ICU15 and compatible IPM25 combination, and check the complete potential-group current budget.
- Plan encoder, temperature-sensor and RS232 connections using the Siemens connector assignments.
- Complete drive commissioning and the required safety validation for the assembled machine before operation.
6SL3244-0SA01-1AA1 ET 200S FC ICU24F Fail-Safe Control Unit
ICU24F drive control with motor feedback, RS232 commissioning, parameter backup and STO, SS1 and SLS functions in the ET 200S FC system.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6SL3244-0SA01-1AA1 |
| Product Type | Fail-safe inverter control unit |
| Core Function | Motor regulation with integrated safety functions |
| Application | Distributed ET 200S drive stations with IPM25 power modules |
Integrated safe motion functions
The ICU24F supports Safe Torque Off, Safe Stop 1 and Safely Limited Speed through the configured ET 200S safety groups.
Motor feedback and protection
PTC/KTY84 temperature monitoring and single-ended HTL incremental feedback support motor control and diagnostic functions.
Commissioning and parameter handling
RS232 provides STARTER access, while the MMC slot supports parameter transfer and replacement workflows.
Product Overview
6SL3244-0SA01-1AA1 is an ICU24F fail-safe control unit for the ET 200S FC distributed frequency converter. It regulates the associated IPM25 power module and exchanges control and diagnostic information with the higher-level controller through the IM151 interface module.
The control unit combines motor-temperature and speed-feedback interfaces with RS232 access for STARTER and an MMC slot for parameter storage. Its fail-safe functions are integrated into the station shutdown groups G1 through G6.
Key Functions
Integrated safe motion functions
The ICU24F supports Safe Torque Off, Safe Stop 1 and Safely Limited Speed through the configured ET 200S safety groups.
Motor feedback and protection
PTC/KTY84 temperature monitoring and single-ended HTL incremental feedback support motor control and diagnostic functions.
Commissioning and parameter handling
RS232 provides STARTER access, while the MMC slot supports parameter transfer and replacement workflows.
Official Specifications
| Current consumption | 0.4 A typical; 0.8 A maximum |
|---|---|
| Dimensions (W × H × D) | 15 × 220 × 156 mm, including terminal-module mounting depth |
| Weight | Approximately 250 g |
| Operating temperature | −10 to +60 °C horizontal; −10 to +40 °C vertical installation |
| Degree of protection | IP20 |
| Maximum achievable safety classification | SIL 2 to IEC 61508; Category 3 to EN 954-1 |
| PFH value | 1.46 × 10⁻7 per hour |
| Safety-related service life | 10 years |
| Frequency resolution | 0.01 Hz for digital/serial setpoint and output-frequency resolution |
| Commissioning interface | RS232 for STARTER |
| Motor-temperature interface | PTC / KTY84 |
| Encoder interface | 9-pin D-sub socket for single-ended HTL incremental encoders |
| Encoder supply | Unregulated 24 V supplied through the control-unit connector |
| Safety functions | STO, SS1 and SLS |
| Diagnostic indicators | 10 LEDs: SF, RDY, STO, ES and SG1–SG6 |
Frequently Asked Questions
Which terminal module is required for 6SL3244-0SA01-1AA1?
Use TM-ICU15 in a suitable fail-safe potential group with the IPM25 power module positioned to its right.
Which encoder signals can 6SL3244-0SA01-1AA1 evaluate?
The encoder interface accepts single-ended HTL incremental signals, with A and B tracks needed to evaluate both speed and direction.
Should an external supply power the encoder connected to 6SL3244-0SA01-1AA1?
The control unit supplies the encoder with unregulated 24 V through its D-sub connector, so an external encoder supply must not be connected.
How is a KTY84 connected to 6SL3244-0SA01-1AA1?
Connect the KTY anode to pin 1 and its cathode to pin 2 of the temperature-sensor interface.
Which parameter memory is listed for 6SL3244-0SA01-1AA1?
Use MMC parameter memory 6SL3254-0AM00-0AA0 for parameter handling.
How much control-supply current should be allowed for 6SL3244-0SA01-1AA1?
Allow up to 0.8 A per control unit and include every other load when checking the potential-group power-module limit.
Can a standard ICU24 replace 6SL3244-0SA01-1AA1?
A fail-safe ICU24F must not be replaced with a non-fail-safe ICU24.