Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6sl3211 0ab12 5ub0 sinamics g110 0 25 kw uss inverter-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens 6SL3211-0AB12-5UB0 SINAMICS G110 0.25 kW USS Inverter

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
SINAMICS G110

6SL3211-0AB12-5UB0 SINAMICS G110 0.25 kW USS Inverter

A 0.25 kW unfiltered G110 inverter with single-phase 200–240 V input and an RS485 USS interface.

At a Glance

Brand Siemens
Model 6SL3211-0AB12-5UB0
Product Type Variable-frequency inverter
Core Function Controlling an induction motor
Application Compact variable-speed drive systems

Control motor speed

Linear, quadratic and programmable multipoint V/f characteristics support different motor-load requirements.

Communicate over USS

The serial interface uses RS485 with the USS protocol.

Configure local control signals

Three programmable digital inputs and one optically isolated transistor output support control-circuit integration.

Product Overview

6SL3211-0AB12-5UB0 provides adjustable-frequency motor control using the USS communication version of the SINAMICS G110.

The frame A drive supports configurable digital control signals, selectable V/f characteristics and an optional Basic Operator Panel for local operation.

Ordering focus: Match the 0.25 kW motor and 1.7 A output rating, and use the USS interface for serial control.
Key Functions

Control motor speed

Linear, quadratic and programmable multipoint V/f characteristics support different motor-load requirements.

Communicate over USS

The serial interface uses RS485 with the USS protocol.

Configure local control signals

Three programmable digital inputs and one optically isolated transistor output support control-circuit integration.

Official Specifications
Rated Motor Power 0.25 kW
Mains Supply Single-phase 200–240 V AC, ±10%
Input Frequency 47–63 Hz
Rated Output Current 1.7 A
Input Current 4.5 A at 230 V nominal input
Output Frequency 0–650 Hz
Control Characteristics Linear, quadratic or programmable multipoint V/f
Overload Cycle 150% rated output current for 60 s, then 85% for 240 s
Pulse Frequency 8 kHz standard; adjustable 2–16 kHz in 2 kHz steps
Serial Interface RS485 USS
Digital Inputs 3 configurable PNP inputs; maximum 30 V
Digital Output 1 optically isolated NPN output; 24 V DC, 50 mA resistive load
Integrated EMC Filter None
Maximum Motor Cable Length 25 m shielded; 50 m unshielded
Recommended Mains Fuse 10 A; Siemens 3NA3803
Power and PE Terminal Torque 0.96 N·m for frame A M3.5 screws
Operating Temperature −10 to +40 °C; up to +50 °C with derating
Protection IP20
Dimensions (W × H × D) 90 × 150 × 116 mm
Approximate Weight 0.7 kg without options
Frequently Asked Questions

Can 6SL3211-0AB12-5UB0 run from a single-phase 230 V mains connection?

The supply input accepts single-phase 200–240 V AC with a ±10% tolerance.

Can I send speed commands to 6SL3211-0AB12-5UB0 through RS485?

This version supports serial control over the USS protocol.

Does 6SL3211-0AB12-5UB0 have the analog version’s 0–10 V setpoint input?

This article is the USS version rather than the analog-input version.

Must I add an EMC filter when the installation requires filtered operation with 6SL3211-0AB12-5UB0?

This unfiltered version requires a suitable external filter when the installation needs additional EMC filtering.

Can I fit a local keypad to 6SL3211-0AB12-5UB0?

A Basic Operator Panel is available as an optional accessory.

How far can I run a shielded motor cable from 6SL3211-0AB12-5UB0?

The maximum shielded motor-cable length is 25 m.

Can 6SL3211-0AB12-5UB0 supply a brief motor overload during acceleration?

The overload cycle permits 150% of rated output current for 60 seconds followed by 240 seconds at 85%.

Compatibility & Ordering Notes
Before ordering 6SL3211-0AB12-5UB0: Match the 0.25 kW motor and 1.7 A output rating, and use the USS interface for serial control.

Before installation

  • Use a motor matched to the 0.25 kW drive power and 1.7 A output current.
  • Configure the USS link and digital inputs for the selected command and setpoint sources.
  • Select an external EMC filter when required for the installation.
  • Observe motor-cable limits, thermal derating and the recommended 10 A mains fuse.
Hot Selling Models
V71 13614894
6FL1100-1DA22
6GK1143-0AB00
OP87232 1422805
3LD2264-1TC51
V60A4D7A-XA090 B4383
DN32 PN64 1.4408
ABB TAL26-40-00
0820022980
1301-WiFi
3RK1301-1CB00-0AA0
6ES7193-1CL10-0XA0 6ES7133-1BL01-0XB0
NLS1-01/32-220-1-2
NLS1-01/32-220-3-3
PT4-Quattro 3211797

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.