EN
Siemens 6SL3055-0AA00-3FA0 SINAMICS TM15 Terminal Module
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Match the configured DI and DO directions to the field wiring.
- Keep all output-group currents within the temperature-dependent limits.
- Connect the protective conductor and provide separate signal-cable strain relief.
- Include the DRIVE-CLiQ cable and any unused-port blanking plugs in the accessory plan.
SIEMENS SINAMICS TM15
6SL3055-0AA00-3FA0 SINAMICS TM15 Terminal Module
Add 24 individually configurable digital inputs or outputs to a drive system through DRIVE-CLiQ, with three isolated groups and local status LEDs.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6SL3055-0AA00-3FA0 |
| Product Type | Digital I/O expansion module |
| Core Function | Expand drive-system field signals |
| Application | DRIVE-CLiQ drive and motion-control systems |
Configurable direction
Each of the 24 channels is parameterized separately as a digital input or output.
DRIVE-CLiQ connection
Two sockets integrate the terminal module into the drive communication topology.
Cabinet installation
The housing mounts on a TH35 rail and provides plug-in screw terminals.
Product Overview
6SL3055-0AA00-3FA0 expands the digital signal connections of a SINAMICS drive system. Its 24 bidirectional channels are electrically isolated in three groups of eight, allowing the required mix of machine inputs and actuator outputs to be defined in parameters.
Two DRIVE-CLiQ sockets connect the terminal module to the drive system, while per-channel LEDs display the logical signal state and a multicolor module LED indicates operating status.
Key Functions
Allocate the required mix of digital signals
Every channel can be assigned independently as DI or DO, providing a configurable terminal interface for the machine.
Connect to the drive communication chain
Two DRIVE-CLiQ sockets support module integration and onward connection within the permitted drive topology.
Observe field states during commissioning
Twenty-four green channel LEDs and a multicolor module-status LED help locate active signals and module conditions.
Official Specifications
| Channel Configuration | 24 bidirectional digital channels, individually parameterizable as DI or DO |
|---|---|
| Electrical Grouping | 3 isolated groups of 8 channels |
| DRIVE-CLiQ Sockets | 2 |
| Electronics Supply Voltage | 24 V DC; permitted range 20.4 to 28.8 V DC |
| Electronics Current Consumption | 0.15 A without DRIVE-CLiQ or digital-output loads |
| Maximum Power Dissipation | 3 W |
| Digital Input Voltage Range | −30 to +30 V DC |
| Input Logic Levels | LOW: −30 to +5 V; HIGH: 15 to 30 V |
| Typical Hardware Input Delays | 50 µs rising; 100 µs falling |
| Digital Output Rating | 24 V DC; maximum 0.5 A per channel |
| Group Output-Current Limits | 4 A at 40 °C; 3 A at 50 °C; 2 A at 60 °C |
| Maximum Field-Signal Cable Length | 30 m |
| Signal Terminal Connection | Plug-in screw terminals; maximum conductor cross-section 1.5 mm² |
| Supply Conductor and Fuse Limits | Maximum conductor cross-section 2.5 mm²; maximum fuse protection 20 A |
| Protective-Conductor Connection | M4 screw |
| Ambient Operating Temperature | 0 to 60 °C up to 2000 m altitude |
| Permitted Relative Humidity | 5 to 95%, without condensation |
| Dimensions | 50 × 150 × 111 mm (W × H × D) |
Frequently Asked Questions
Can I mix digital inputs and outputs freely on 6SL3055-0AA00-3FA0?
Yes, each of the 24 channels can be parameterized independently as a digital input or output.
Does 6SL3055-0AA00-3FA0 support DRIVE-CLiQ connection for mobile equipment?
No, this article is supplied without a DRIVE-CLiQ cable.
How should I load an output group of 6SL3055-0AA00-3FA0 at 50 °C?
Limit the total current of that group to 3 A while keeping each output within its 0.5 A rating.
What happens to an open digital input on 6SL3055-0AA00-3FA0?
An open digital input is interpreted as a LOW signal.
Can I extend the field-signal cables from 6SL3055-0AA00-3FA0 beyond 30 m?
No, the maximum permitted digital I/O cable length is 30 m.
How do I mount 6SL3055-0AA00-3FA0 inside the control cabinet?
Snap the module onto a TH35 standard mounting rail and connect the protective conductor to the M4 housing connection.
Can the cable-shield clamp on 6SL3055-0AA00-3FA0 also provide strain relief?
No, the shield connection terminal must not be used as a strain-relief mechanism.
