EN
Siemens SINAMICS S120 6SL3055-0AA00-3BA0 TM54F Safety Terminal Module
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Use the module only with platforms specifically released for TM54F.
- Match the external safety devices to the documented Type 1 input and 24 V output characteristics.
- Repeat the validated safety acceptance procedure after replacement.
SIEMENS · SINAMICS S120
6SL3055-0AA00-3BA0 TM54F Safety Terminal Module
The 6SL3055-0AA00-3BA0 TM54F provides ten fail-safe digital inputs, four fail-safe digital outputs and three 24 V sensor supplies for Safety Integrated applications.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6SL3055-0AA00-3BA0 |
| Product Type | DRIVE-CLiQ fail-safe digital I/O terminal module |
| Core Function | Adds fail-safe digital inputs, outputs and sensor supplies to a SINAMICS safety configuration |
| Application or Compatible Series | SINAMICS S120, SINUMERIK 828D and SIMOTION D systems supporting TM54F |
Exact Identification
Match 6SL3055-0AA00-3BA0 character by character before replacement.
Interface Check
Confirm the installed supply, terminals, network and field wiring.
Project Backup
Preserve the validated configuration and application data before exchange.
Product Overview
The 6SL3055-0AA00-3BA0 TM54F provides ten fail-safe digital inputs, four fail-safe digital outputs and three 24 V sensor supplies for Safety Integrated applications.
Ten safety inputs and four safety outputs connect external safety devices to the drive system. The terminal module exchanges safety data with supported Control Units and motion-control platforms. Input and output processing can be set from 4 to 25 ms to match the validated safety design.
Key Functions
Fail-Safe Digital I/O
Ten safety inputs and four safety outputs connect external safety devices to the drive system.
DRIVE-CLiQ Integration
The terminal module exchanges safety data with supported Control Units and motion-control platforms.
Adjustable Safety Scan Cycle
Input and output processing can be set from 4 to 25 ms to match the validated safety design.
Official Specifications
| Fail-Safe Digital Inputs | 10 |
|---|---|
| Fail-Safe Digital Outputs | 4 |
| 24 V Sensor Supplies | 3 |
| Sensor-Supply Current | 0.5 A per output |
| Digital Input Standard | IEC 61131-2 Type 1 |
| Digital Input Voltage Range | -3 to +30 V |
| Input Low Level | -3 to +5 V |
| Input High Level | 15 to 30 V |
| Typical Input Current at 24 V | Greater than 3.2 mA |
| Typical Input Delay L→H | 30 µs |
| Typical Input Delay H→L | 60 µs |
| Maximum Output Load Current | 0.5 A per fail-safe output |
| Typical Output Delay L→H | 300 µs |
| Typical Output Delay H→L | 350 µs |
| Safety Scan Cycle | 4 to 25 ms adjustable |
| Maximum Power Loss | 4.5 W |
| Dimensions | 50 × 151 × 110 mm |
| Approximate Weight | 0.9 kg |
| Safety Capability | SIL 2, PL d and Category 3 |
Frequently Asked Questions
How many safety channels are provided by 6SL3055-0AA00-3BA0?
The module provides ten fail-safe digital inputs and four fail-safe digital outputs.
Which controllers can exchange safety data with 6SL3055-0AA00-3BA0?
Use a supported CU310-2, CU320-2, SINUMERIK 828D, NX10.3, NX15.3 or SIMOTION D platform.
What input levels apply to 6SL3055-0AA00-3BA0?
A low signal is -3 to +5 V and a high signal is 15 to 30 V.
How should the safety scan cycle be set for 6SL3055-0AA00-3BA0?
Choose a value from 4 to 25 ms that is justified by the validated machine safety calculation.
What current can each output of 6SL3055-0AA00-3BA0 switch?
Keep each fail-safe digital output at or below 0.5 A.
What should be saved before replacing 6SL3055-0AA00-3BA0?
Preserve the drive project, safety parameters, checksums, terminal map and acceptance-test records.
What must be completed after installing 6SL3055-0AA00-3BA0?
Perform the specified safety acceptance test and verify every input, output and shutdown path.
