EN
Siemens SIMATIC Ident 6GT2002-0LE40 RF128C RFID Communication Module
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: China
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Use only readers and connection cables released for the SIMATIC Ident installation.
- Restore the validated network and reader-channel parameters before operation.
- Test every reader path from field device to controller after replacement.
SIEMENS · SIMATIC Ident
6GT2002-0LE40 RF128C RFID Communication Module
The 6GT2002-0LE40 SIMATIC RF128C is an industrial RFID communication module that links as many as four readers to PROFINET, EtherNet/IP or Ethernet/XML networks.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6GT2002-0LE40 |
| Product Type | Industrial RFID communication module |
| Core Function | Connects up to four SIMATIC RF readers to an industrial Ethernet network |
| Application or Compatible Series | SIMATIC Ident systems using PROFINET, EtherNet/IP or XML communication |
Exact Identification
Match 6GT2002-0LE40 character by character before replacement.
Interface Check
Confirm the installed supply, terminals, network and field wiring.
Project Backup
Preserve the validated configuration and application data before exchange.
Product Overview
The 6GT2002-0LE40 SIMATIC RF128C is an industrial RFID communication module that links as many as four readers to PROFINET, EtherNet/IP or Ethernet/XML networks.
Four reader channels consolidate multiple RFID read points in one compact communication module. The module supports PROFINET, EtherNet/IP and XML-based Ethernet communication. A 100Base-TX full-duplex Ethernet interface supports 100 Mbit/s industrial communication.
Key Functions
Four-Reader Connectivity
Four reader channels consolidate multiple RFID read points in one compact communication module.
Industrial Ethernet Integration
The module supports PROFINET, EtherNet/IP and XML-based Ethernet communication.
Deterministic Network Link
A 100Base-TX full-duplex Ethernet interface supports 100 Mbit/s industrial communication.
Official Specifications
| Product Designation | SIMATIC RF128C |
|---|---|
| Reader Connections | Up to 4 |
| Supported Industrial Protocols | PROFINET, EtherNet/IP and Ethernet/XML |
| Ethernet Standard | 100Base-TX |
| Ethernet Data Rate | 100 Mbit/s |
| Ethernet Duplex Mode | Full duplex |
| Ethernet Connector | 8-pin RJ45 |
| Maximum Ethernet Cable Length | 100 m |
| Recommended Cable Category | Shielded twisted pair, Category 5 or higher |
| Supply Voltage | 24 V DC, SELV/PELV |
| Installation Environment | Protected industrial enclosure |
| Approximate Net Weight | 0.186 kg |
Frequently Asked Questions
How many readers can be connected to 6GT2002-0LE40?
Up to four compatible RFID readers can be connected to the communication module.
Which plant networks can use 6GT2002-0LE40?
The network design may use PROFINET, EtherNet/IP or XML communication over industrial Ethernet.
What supply should be prepared for 6GT2002-0LE40?
Provide a correctly protected 24 V DC SELV or PELV supply.
How should Ethernet cabling be selected for 6GT2002-0LE40?
Use shielded Category 5 or higher cabling and keep each segment within the specified length.
What must be backed up before replacing 6GT2002-0LE40?
Record the IP settings, protocol selection, reader assignments and controller configuration.
Where should 6GT2002-0LE40 be installed?
Mount it in the protected industrial environment specified for the system design.
What should engineers test after installing 6GT2002-0LE40?
Verify network reachability and complete read-cycle operation on every connected reader.
