Siemens SIMATIC NET 6GK7542-5FX00-0XE0 CP 1542-5
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
Siemens · SIMATIC NET S7-1500
6GK7542-5FX00-0XE0 CP 1542-5 PROFIBUS Processor
Siemens 6GK7542-5FX00-0XE0 is the SIMATIC NET CP 1542-5 communication processor for connecting an S7-1500 station to PROFIBUS as a DPV1 master or DP device with S7, PG/OP and FDL communication.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6GK7542-5FX00-0XE0 |
| Product Type | S7-1500 PROFIBUS communication processor |
| Core Function | Adds PROFIBUS DP master or device communication to an S7-1500 station |
| Application or Compatible Series | SIMATIC S7-1500 automation systems |
Bus Role
Configure the module for the required DP master or DP device role and address allocation.
Network Connection
Use the nine-pin RS485 PROFIBUS socket and a cable system rated for the selected bus speed.
Engineering Match
Confirm the CPU type, STEP 7 Professional version and configured communication limits before replacement.
Product Overview
Siemens 6GK7542-5FX00-0XE0 is the SIMATIC NET CP 1542-5 communication processor for connecting an S7-1500 station to PROFIBUS as a DPV1 master or DP device with S7, PG/OP and FDL communication.
The processor can operate as a DPV1 master or as a DPV0 and DPV1 device. The module handles PROFIBUS, S7 and FDL communication while relieving the controller of bus tasks. Time synchronization, identification data and CPU-based web diagnostics support maintenance.
Key Functions
Flexible PROFIBUS Role
The processor can operate as a DPV1 master or as a DPV0 and DPV1 device.
Dedicated Communication Capacity
The module handles PROFIBUS, S7 and FDL communication while relieving the controller of bus tasks.
Time and Diagnostic Services
Time synchronization, identification data and CPU-based web diagnostics support maintenance.
Official Specifications
| PROFIBUS Connection | One 9-pin Sub-D socket with RS485 electrical interface |
|---|---|
| Supported Transfer Rates | 9.6 kbit/s to 12 Mbit/s including 45.45 kbit/s |
| Maximum DP Devices as Master | 32 |
| Total Master Input Address Area | 2048 bytes |
| Total Master Output Address Area | 2048 bytes |
| Per-Device Master Address Area | 244 input bytes and 244 output bytes |
| DP-Device Address Area | 240 input bytes and 240 output bytes |
| Maximum S7 Communication Connections | 16, subject to the system upper limit |
| Maximum Active Multi-Protocol Connections | 16 |
| Required Engineering Software | STEP 7 Professional V12 SP1 or higher |
| Backplane Supply Voltage | 15 V DC |
| Typical Backplane Current | 100 mA |
| Typical Power Loss | 1.5 W |
| Overvoltage Category | Category II |
| Operating Temperature with Horizontal Rack | 0 to 60 °C |
| Operating Temperature with Vertical Rack | 0 to 40 °C |
| Storage and Transport Temperature | -40 to 70 °C |
| Maximum Operating Humidity | 95 percent at 30 °C without condensation |
| Degree of Protection | IP20 |
| Dimensions and Weight | 35 x 147 x 129 mm; approximately 270 g |
Frequently Asked Questions
Can 6GK7542-5FX00-0XE0 run as a PROFIBUS master or device?
It can be configured as a DPV1 master or as a DPV0 and DPV1 device.
How many DP devices can 6GK7542-5FX00-0XE0 control as master?
The processor can operate up to thirty-two DP devices within the documented address limits.
Which connector should be used with 6GK7542-5FX00-0XE0?
Use a compatible nine-pin Sub-D PROFIBUS connector for the RS485 interface.
What STEP 7 version is required to configure 6GK7542-5FX00-0XE0?
Use STEP 7 Professional V12 SP1 or a later compatible TIA Portal version.
Can 6GK7542-5FX00-0XE0 provide 24 V power through its PROFIBUS socket?
No, the PROFIBUS interface does not supply a twenty-four-volt auxiliary output.
What rack orientation affects 6GK7542-5FX00-0XE0 operating temperature?
Horizontal installation permits up to sixty degrees Celsius, while vertical installation permits up to forty degrees Celsius.
Which project data should be retained before exchanging 6GK7542-5FX00-0XE0?
Retain the bus role, station address, baud rate, DP configuration, connection settings and time-synchronization parameters.
Compatibility & Ordering Notes
Compatibility Checklist
- Confirm the target station is a SIMATIC S7-1500 rack with a supported CPU and free module position.
- Check that the configured DP device count and address areas remain within the processor limits.
- Back up the PROFIBUS network and S7 communication parameters before replacement.