EN
Siemens SIMATIC NET CP 443-5 Extended PROFIBUS Communication Processor 6GK7443-5DX05-0XE0
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
SIEMENS · SIMATIC NET S7-400
6GK7443-5DX05-0XE0 SIMATIC NET CP 443-5 Extended PROFIBUS Communication Processor
The CP 443-5 Extended is a SIMATIC NET communication processor for connecting an S7-400 station to PROFIBUS DP with additional S7, PG/OP and S5-compatible services.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6GK7443-5DX05-0XE0 |
| Product Type | CP 443-5 Extended PROFIBUS communication processor |
| Core Function | Connects an S7-400 controller to PROFIBUS DP and industrial communication services |
| Application or Compatible Series | SIMATIC S7-400 systems requiring DP master, S7, PG/OP or S5-compatible communication |
Exact Identification
Match 6GK7443-5DX05-0XE0 character by character and confirm the complete SIMATIC NET CP 443-5 Extended PROFIBUS Communication Processor designation.
Interface Arrangement
Confirm the installed supply, ports, field connections and required accessories before wiring the replacement.
Configuration Check
Preserve the approved engineering project, network parameters and application data used by the installed system.
Product Overview
The CP 443-5 Extended is a SIMATIC NET communication processor for connecting an S7-400 station to PROFIBUS DP with additional S7, PG/OP and S5-compatible services.
The processor supports DPV1 communication with as many as 125 distributed slaves. S7 communication, PG/OP functions and S5-compatible open communication can operate through the same module. Supported PROFIBUS transmission rates extend from 9.6 kbit/s to 12 Mbit/s.
Key Functions
PROFIBUS DP Master Operation
The processor supports DPV1 communication with as many as 125 distributed slaves.
Multiple Communication Services
S7 communication, PG/OP functions and S5-compatible open communication can operate through the same module.
Wide Bus-Speed Range
Supported PROFIBUS transmission rates extend from 9.6 kbit/s to 12 Mbit/s.
Official Specifications
| PROFIBUS Transmission Rates | 9.6 kbit/s to 12 Mbit/s |
|---|---|
| PROFIBUS Connector | 9-pin D-sub, RS485 |
| PROFIBUS Profile | DPV1 |
| Maximum DP Slaves | 125 |
| Total DP Input Area | 4096 bytes |
| Total DP Output Area | 4096 bytes |
| Input Data per DP Slave | 244 bytes maximum |
| Output Data per DP Slave | 244 bytes maximum |
| Maximum S7 Connections | 48 |
| Open-Communication Connections | 32 |
| Open-Communication Data per Connection | 240 bytes |
| Backplane Supply | 5 V DC, ±5% |
| Typical Current Consumption | 0.6 A |
| Typical Power Loss | 3 W |
| Operating Temperature | 0 to 60 °C |
| Storage and Transport Temperature | -40 to 70 °C |
| Maximum Relative Humidity | 95% |
| Degree of Protection | IP20 |
| Dimensions | 25 × 290 × 210 mm |
| Approximate Weight | 0.65 kg |
Frequently Asked Questions
How many PROFIBUS slaves can 6GK7443-5DX05-0XE0 control?
A configured DP master system can include as many as 125 slaves.
Which PROFIBUS connector is used by 6GK7443-5DX05-0XE0?
The bus interface uses a 9-pin D-sub connector with an RS485 physical layer.
What PROFIBUS speeds are supported by 6GK7443-5DX05-0XE0?
The interface supports standard rates from 9.6 kbit/s through 12 Mbit/s.
Can 6GK7443-5DX05-0XE0 carry S7 and PG/OP communication?
Yes, it supports S7 communication and programming-device or operator-panel services.
Does 6GK7443-5DX05-0XE0 support DPV1 functions?
Yes, the communication processor supports the DPV1 profile.
What environmental protection does 6GK7443-5DX05-0XE0 provide?
The module is rated IP20 and must be installed in the appropriate protected enclosure.
What should be preserved before replacing 6GK7443-5DX05-0XE0?
Save the STEP 7 project, bus address, transmission rate, slave configuration and configured communication connections.
Compatibility & Ordering Notes
Compatibility Checklist
- Use the communication processor in a compatible SIMATIC S7-400 central rack.
- Match the PROFIBUS cable, connector, address and transmission rate to the installed network.
- Restore the complete hardware and communication configuration from the verified STEP 7 project.
