Siemens 6GK5991-1AD00-8AA0 SCALANCE SFP991-1 Fast Ethernet Transceiver
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Use a transceiver and SFP slot combination approved for the selected host.
- Match the remote link to 100BASE-FX multimode operation and an LC connection.
- Calculate fiber attenuation with the transmitter and receiver optical power limits.
- Select the fiber grade for the required distance and observe the host-dependent operating environment.
6GK5991-1AD00-8AA0 SCALANCE SFP991-1 Fast Ethernet Transceiver
100BASE-FX multimode SFP with an LC interface, 1300 nm wavelength and up to 5 km reach with OM2++ fiber.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6GK5991-1AD00-8AA0 |
| Product Type | Optical SFP transceiver |
| Core Function | Fast Ethernet communication over fiber |
| Application | Approved SCALANCE optical SFP slots |
Fast Ethernet optical link
One LC optical port operates at 100 Mbit/s using 100BASE-FX transmission.
Multimode distance selection
The link supports distances up to 5 km with the appropriate OM2++ multimode fiber.
Defined receiver limits
Transmitter and receiver power specifications support verification of attenuation through the installed fiber route.
Product Overview
6GK5991-1AD00-8AA0 adds a 100 Mbit/s fiber connection to a compatible SCALANCE network component using a compact latched SFP interface.
The SFP991-1 uses multimode fiber at 1300 nm, with its maximum 5 km reach dependent on the selected fiber and the optical link budget.
Key Functions
Fast Ethernet optical link
One LC optical port operates at 100 Mbit/s using 100BASE-FX transmission.
Multimode distance selection
The link supports distances up to 5 km with the appropriate OM2++ multimode fiber.
Defined receiver limits
Transmitter and receiver power specifications support verification of attenuation through the installed fiber route.
Official Specifications
| Optical port | 1 LC port at 100 Mbit/s |
|---|---|
| Transmission method | 100BASE-FX |
| Fiber and wavelength | Multimode fiber; 1300 nm |
| Transmitter output power | −24 to −14 dBm |
| Maximum receiver input | −12 dBm |
| Minimum receiver sensitivity | −31 dBm |
| Minimum required attenuation | 0 dB |
| Optical range | 0–5 km, with maximum reach dependent on fiber and OM2++ selection |
| Operating temperature | −40 to +85°C; +85°C permitted for up to 16 hours |
| Storage and transport temperature | −40 to +85°C |
| Relative humidity limit | 95% at 25°C, noncondensing |
| Enclosure protection | IP20 |
| Mechanical retention | Latched SFP installation |
| Dimensions and weight | 14 × 9 × 57 mm (W × H × D); 0.01 kg |
| EMC performance standards | EN 61000-6-4:2007 Class A; EN 61000-6-2:2005 |
Frequently Asked Questions
Can 6GK5991-1AD00-8AA0 be used as a Gigabit Ethernet transceiver?
The transceiver operates at 100 Mbit/s using 100BASE-FX.
What fiber grade is associated with the maximum reach of 6GK5991-1AD00-8AA0?
The stated maximum reach of 5 km uses OM2++ multimode fiber.
Is 6GK5991-1AD00-8AA0 a single-mode optical module?
The optical interface uses multimode fiber at a wavelength of 1300 nm.
Which connector should terminate the fiber attached to 6GK5991-1AD00-8AA0?
Use an LC optical connection matched to the transceiver port.
What receiver power ceiling applies when calculating a link for 6GK5991-1AD00-8AA0?
The received optical power must not exceed −12 dBm.
What is the lower receiver-sensitivity figure for 6GK5991-1AD00-8AA0?
The minimum stated receiver sensitivity is −31 dBm.
How should I account for the +85°C limit of 6GK5991-1AD00-8AA0?
Treat +85°C as a maximum exposure permitted for up to 16 hours and also observe the host device limits.