Siemens 6GK1905-0AB00 SIMATIC NET PROFIBUS PA SpliTConnect M12 Outlet
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Provide a free SpliTConnect Tap branch.
- Use the M12 socket rather than the cable outlet at that branch.
- Wire signal B to pin 1, signal A to pin 3 and shield to pin 4.
- Leave pin 2 unconnected.
- Fit the contacting element only after assembling the tap.
- Use the SpliTConnect Coupler when the task is joining two taps.
6GK1905-0AB00 SIMATIC NET PROFIBUS PA SpliTConnect M12 Outlet
An M12 outlet insert for direct connection of a PROFIBUS PA field device to a SpliTConnect Tap.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6GK1905-0AB00 |
| Product Type | Fieldbus connection accessory |
| Core Function | Connects a field device to a tap branch |
| Application | SpliTConnect PA wiring systems |
Tap branch accessory
Fits a free outlet on a SpliTConnect Tap.
M12 field connection
Replaces the cable-connection outlet with an M12 socket.
Defined signal assignment
Uses the PA signal and shield pin arrangement.
Product Overview
6GK1905-0AB00 adapts a free SpliTConnect Tap branch to an M12 socket connection for a PROFIBUS PA field device.
The accessory screws onto the tap in place of a cable-connection outlet, after which the contacting element is fitted to the fully assembled tap.
Key Functions
M12 branch connection
The socket provides a direct plug connection between a field device and a SpliTConnect Tap.
Replaceable outlet arrangement
The insert occupies the branch position otherwise used for the direct cable connection.
PA signal and shield continuity
The connector assignment carries signal B on pin 1, signal A on pin 3 and the shield on pin 4, with pin 2 unused.
Official Specifications
| Field-device connector | M12 socket |
|---|---|
| Pin assignment | 1: signal B; 2: not connected; 3: signal A; 4: shield |
| Tap-side Attachment | Screw-on connection to a SpliTConnect Tap outlet |
| PA Electrical Standard | IEC 61158-2 (EN 61158-2) |
| PROFIBUS PA Transmission Rate | 31.25 kbit/s |
| PA Signal Coding | Manchester-coded synchronous data stream |
| PA Segment Transmission Medium | Shielded twisted-pair cable |
| Assembled SpliTConnect System Protection | IP67 with all ports correctly assembled |
Frequently Asked Questions
Do I need a SpliTConnect Tap as well as 6GK1905-0AB00?
The outlet is an accessory that screws onto a free branch of a separately selected SpliTConnect Tap.
Can 6GK1905-0AB00 replace a direct cable-connection outlet?
The M12 outlet is used in place of the tap’s cable-connection outlet.
Which pins carry the PA signals on 6GK1905-0AB00?
Signal B uses pin 1 and signal A uses pin 3.
Where should the cable shield connect on 6GK1905-0AB00?
The shield connection is pin 4, while pin 2 is not connected.
When should I fit the contacting element after installing 6GK1905-0AB00?
Screw the contacting element onto the tap after the tap and its outlets are completely assembled.
Can I use 6GK1905-0AB00 to join two SpliTConnect Taps?
Use the SpliTConnect Coupler accessory for joining taps rather than the field-device M12 outlet.
How many pieces are included in the manufacturer pack of 6GK1905-0AB00?
The listed pack contains five outlet pieces.