Siemens 6GK1500-0FC10 SIMATIC NET PROFIBUS FastConnect Axial Bus Connector
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Match the PB FC cable construction to the integrated insulation-displacement terminals.
- Allow straight cable clearance behind the nine-pin device connection.
- Provide separate PG access when required by the maintenance arrangement.
- Set the termination switch to suit the actual segment end and onward connection.
6GK1500-0FC10 SIMATIC NET PROFIBUS FastConnect Axial Bus Connector
An axial PROFIBUS connector using FastConnect insulation-displacement terminals in a lightweight plastic enclosure.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6GK1500-0FC10 |
| Product Type | FastConnect RS485 bus connector |
| Core Function | Terminate and connect a fieldbus node |
| Application | Industrial PCs, SIMATIC OP and OLM |
FastConnect wiring
Insulation-displacement contacts accept two-core PB FC installation cables.
Axial outlet
The 180-degree route keeps the bus cable aligned behind the connection.
Wide temperature range
The connector operates from −40 to +70°C.
Product Overview
6GK1500-0FC10 joins a PROFIBUS node to two-core PB FC installation cables through integrated FastConnect insulation-displacement contacts.
A nine-pin Sub-D interface connects to the device, while the two cable entries allow the bus to continue through the node. Switching on the built-in termination isolates the outgoing bus connection.
Key Functions
Assemble PB FC cables
Integrated insulation-displacement contacts provide the FastConnect connection for two-core PROFIBUS FC installation cables.
Set bus termination locally
The slide switch selects the built-in resistor network and disconnects the onward connection when termination is active.
Secure a compact device interface
A screwed joint retains the Sub-D interface and integrated strain relief supports the installed cables.
Official Specifications
| PROFIBUS Transfer Rate | 9.6 kbit/s to 12 Mbit/s |
|---|---|
| Cable Connections | 2 connections for two-core PB FC installation cable |
| Cable Contact Technology | Integrated insulation-displacement terminals |
| Device Connection | 1 nine-pin Sub-D connector |
| Cable Outlet Angle | 180° |
| Termination Selection | Integrated resistor network with slide switch |
| Outgoing Bus Isolation | Disconnected with termination on |
| Enclosure Material | Plastic |
| Connection Lock | Screwed joint |
| PG Connection Socket | Not fitted |
| Cable Strain Relief | Integrated |
| Dimensions (W × H × D) | 16 × 62 × 34.5 mm |
| Net Weight | 40 g |
| Operating Temperature | −40 to +70°C |
| Storage and Transport Temperature | −25 to +80°C |
| Maximum Relative Humidity | 75% at 25°C, non-condensing |
| Ingress Protection | IP20 |
| Silicone-Free Construction | Yes |
Frequently Asked Questions
Which cable construction should I use with 6GK1500-0FC10?
Use two-core PROFIBUS FC installation cable suitable for the integrated insulation-displacement contacts.
Does 6GK1500-0FC10 need individual screw terminals for the bus conductors?
No, FastConnect insulation-displacement contacts make the cable conductor connections.
Can 6GK1500-0FC10 operate in a −20°C cabinet?
Yes, −20°C is within the permitted operating range of −40 to +70°C.
Where can I connect a PG when using 6GK1500-0FC10?
A separate programming connection is needed because this connector has no PG socket.
Will enabling termination on 6GK1500-0FC10 keep the next PROFIBUS node connected?
No, active termination isolates the outgoing bus connection.
How much room does 6GK1500-0FC10 need behind the device?
The connector body measures 16 × 62 × 34.5 mm and its 180-degree cable outlet requires an axial cable route.
Is 6GK1500-0FC10 a metal-enclosure connector?
No, this FastConnect version has a plastic enclosure and a net weight of 40 g.