Siemens SIMATIC NET 6GK1160-4AA01 CP 1604 PROFINET Processor
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
Siemens · SIMATIC NET
6GK1160-4AA01 CP 1604 Communication Processor
Siemens 6GK1160-4AA01 is the SIMATIC NET CP 1604 PC/104 Plus communications processor with ERTEC 400 and an integrated four-port realtime switch for PROFINET IO.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6GK1160-4AA01 |
| Product Type | PC/104 Plus communications processor |
| Core Function | Connects an embedded PC to PROFINET IO through an integrated realtime switch |
| Application or Compatible Series | PC/104 Plus industrial computers |
Host Platform
Confirm a PC/104 Plus slot, Plug-and-Play BIOS and supported driver environment.
Port Hardware
Include the external RJ45 connection board and forty-pin ribbon cable required for the network ports.
Power Strategy
Check the five-volt load and whether the switch must remain active when the host computer is off.
Product Overview
Siemens 6GK1160-4AA01 is the SIMATIC NET CP 1604 PC/104 Plus communications processor with ERTEC 400 and an integrated four-port realtime switch for PROFINET IO.
The ERTEC 400 handles realtime PROFINET communication independently of the host application. An external connection board exposes four 10/100 Mbit/s RJ45 ports with automatic negotiation and crossing. An external five-volt feed can keep the integrated switch operating when the host system is shut down.
Key Functions
PROFINET IO Processing
The ERTEC 400 handles realtime PROFINET communication independently of the host application.
Four-Port Realtime Switching
An external connection board exposes four 10/100 Mbit/s RJ45 ports with automatic negotiation and crossing.
Optional Independent Switch Power
An external five-volt feed can keep the integrated switch operating when the host system is shut down.
Official Specifications
| Host Bus Width | 32 bit |
|---|---|
| Host Bus Frequency | 33 or 66 MHz |
| Host Interface Levels | 3.3 V and 5 V |
| Communication ASIC | ERTEC 400 |
| External Network Ports | 4 RJ45 ports on the separate connection board |
| Connection-Board Cable | 40-pin ribbon cable |
| Ethernet Standards | 10Base-T and 100Base-TX |
| Ethernet Data Rate | 10 or 100 Mbit/s |
| Duplex Modes | Full duplex and half duplex |
| Link Negotiation | Auto Negotiation |
| Pair Assignment | Auto Crossing |
| PCI Operation | PCI master capable |
| Supply Voltage | 5 V ±5% |
| Maximum Current | 800 mA |
| Operating Temperature | 5 to 60 °C |
| Transport and Storage Temperature | -20 to 60 °C |
| Module Dimensions | 90 × 95 × 24 mm |
| Bare Module Weight | Approximately 110 g |
| PROFIenergy Requirement | Hardware version 7 or later with firmware V2.6 or later |
Frequently Asked Questions
Which host slot is required for 6GK1160-4AA01?
Install the processor in a PC/104 Plus system with a Plug-and-Play BIOS.
How many network ports does 6GK1160-4AA01 provide?
The integrated realtime switch uses four external RJ45 ports on the separate connection board.
Which Ethernet speeds can 6GK1160-4AA01 use?
The ports operate at ten or one hundred megabits per second with automatic negotiation.
Can the switch on 6GK1160-4AA01 remain active when the host is off?
Yes, an approved external five-volt supply can keep the realtime switch operating independently of host power.
Can I install two 6GK1160-4AA01 cards in one computer?
No, the operating instructions permit only one CP 1604 per PC and exclude parallel installation with a CP 1616.
What hardware is needed to use the RJ45 ports on 6GK1160-4AA01?
Use the matching external RJ45 connection board and forty-pin ribbon cable.
When can 6GK1160-4AA01 operate as a PROFIenergy device?
Use hardware version seven or later with firmware version 2.6 or later.
Compatibility & Ordering Notes
Compatibility Checklist
- Install no more than one CP 1604 in the host and do not operate it alongside a CP 1616.
- Use the separate RJ45 connection board and matching forty-pin ribbon cable for network access.
- Any external power source must provide approved isolated five-volt SELV power within the documented limits.