Siemens 6FX2001-5QN13 Single-Turn 16-Bit PROFINET Absolute Encoder
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Confirm the PROFINET device configuration and required RT or IRT operating mode.
- Check axial and radial shaft loads against the machine coupling arrangement.
- Verify that the housing and shaft-entry protection ratings suit the installation.
SIEMENS MOTION CONTROL ENCODER
Siemens 6FX2001-5QN13 Single-Turn 16-Bit PROFINET Absolute Encoder
Single-turn absolute encoder with 16-bit resolution, clamping flange, 10 mm shaft and PROFINET IO RT/IRT connectivity.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6FX2001-5QN13 |
| Product Type | Absolute position encoder |
| Core Function | Provides machine-axis position feedback |
| Application | Industrial motion-control systems |
Mechanical Match
Confirm the clamping flange, 10 mm shaft and radial M12 connector orientation.
Network Integration
Use the two PROFINET IRT ports with the specified encoder profile and device configuration.
Environmental Check
Observe the IP ratings, shaft loading and -40 to +85 °C operating range.
Product Overview
This absolute encoder provides single-turn position feedback through PROFINET IO with RT and IRT support.
The product combines a 16-bit measurement system with a clamping flange, 10 mm shaft, radial M12 connections and parameterizable preset and counting direction.
Key Functions
Absolute Position Feedback
Reports the shaft position as a 16-bit single-turn absolute value without requiring incremental reference counting.
Real-Time Industrial Ethernet
Supports PROFINET IO with RT and IRT for deterministic encoder communication.
Parameterizable Commissioning
Allows preset and counting-direction parameters to be adapted to the machine axis.
Official Specifications
| Operating Voltage | 10 to 30 V DC |
|---|---|
| Communication Interface | PROFINET IO with RT and IRT |
| Industrial Ethernet Transmission Rate | 100 Mbit/s |
| Network Connections | Two 4-pin M12 ports for PROFINET |
| Power Connection | One 4-pin M12 connector |
| Connector Orientation | Radial |
| Position Resolution | 16 bit single-turn |
| Shaft Diameter | 10 mm |
| Maximum Speed at ±1 LSB Accuracy | 5,800 rpm |
| Maximum Mechanical Speed | 12,000 rpm |
| Housing Protection | IP67 |
| Shaft-Entry Protection | IP64 |
| Operating Temperature | -40 to +85 °C |
| Position Accuracy | ±79 arcseconds |
| Permissible Shaft Load at up to 6,000 rpm | 40 N axial and 110 N radial |
| Maximum Vibration | 100 m/s² from 55 to 2,000 Hz |
| Maximum Shock | 1,000 m/s² for 6 ms |
| Net Weight | 0.426 kg |
Frequently Asked Questions
Which shaft should I prepare for 6FX2001-5QN13?
Use a 10 mm shaft arrangement that matches the encoder clamping-flange geometry.
Can 6FX2001-5QN13 be used in an IRT-capable PROFINET network?
Yes, the encoder supports PROFINET IO with both RT and IRT communication.
What supply voltage does 6FX2001-5QN13 require?
Provide a regulated 10 to 30 V DC supply through the designated M12 power connection.
How should I protect the shaft entry of 6FX2001-5QN13?
Plan the installation around the IP64 shaft-entry rating while the housing itself is rated IP67.
Can I reverse the counting direction of 6FX2001-5QN13 during commissioning?
Yes, counting direction and preset are parameterizable functions.
What speed limit should I use for precision operation with 6FX2001-5QN13?
Use 5,800 rpm as the specified maximum when the ±1 LSB accuracy condition must be maintained.
What load should I check before mounting 6FX2001-5QN13?
At speeds up to 6,000 rpm, keep the shaft load within 40 N axial and 110 N radial.