EN
Siemens SINUMERIK 828D PPU 280.2 Vertical Panel Processing Unit 6FC5370-8AA20-0AA0
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
SIEMENS · SINUMERIK 828D
6FC5370-8AA20-0AA0 SINUMERIK 828D PPU 280.2 Vertical Panel Processing Unit
The PPU 280.2 is a vertically oriented SINUMERIK 828D panel processing unit that combines CNC control hardware, operator visualization and machine communication functions.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6FC5370-8AA20-0AA0 |
| Product Type | PPU 280.2 vertical panel processing unit |
| Core Function | Combines CNC processing and the machine operator interface in one vertical panel unit |
| Application or Compatible Series | SINUMERIK 828D machine-tool systems and approved SINAMICS S120 Combi configurations |
Exact Identification
Match 6FC5370-8AA20-0AA0 character by character and confirm the complete SINUMERIK 828D PPU 280.2 Vertical Panel Processing Unit designation.
Interface Arrangement
Confirm the installed supply, ports, field connections and required accessories before wiring the replacement.
Configuration Check
Preserve the approved engineering project, network parameters and application data used by the installed system.
Product Overview
The PPU 280.2 is a vertically oriented SINUMERIK 828D panel processing unit that combines CNC control hardware, operator visualization and machine communication functions.
The panel processing unit combines numerical control and operator-interface hardware for compact machine-tool architectures. The PPU 280.2 uses the vertical panel arrangement identified in Siemens SINUMERIK 828D hardware documentation. Siemens lists this PPU version among the controls approved for SINAMICS S120 Combi power modules.
Key Functions
Integrated CNC Platform
The panel processing unit combines numerical control and operator-interface hardware for compact machine-tool architectures.
Vertical Operator Format
The PPU 280.2 uses the vertical panel arrangement identified in Siemens SINUMERIK 828D hardware documentation.
S120 Combi Support
Siemens lists this PPU version among the controls approved for SINAMICS S120 Combi power modules.
Official Specifications
| PPU Version | 280.2 |
|---|---|
| Panel Orientation | Vertical |
| Display Diagonal | 10.4 in |
| Display Type | TFT color |
| Display Resolution | 800 × 600 pixels |
| Rated Supply Voltage | 24 V DC |
| Supply Tolerance | -15% to +20% |
| Maximum Power Consumption | 60 W |
| Front Protection | IP65 with front flap closed |
| Rear Protection | IP20 |
| Operating Temperature, Front | 0 to +45 °C |
| Operating Temperature, Rear | 0 to +55 °C |
| Storage Temperature | -25 to +55 °C |
| Dimensions | 310 × 380 × 105 mm |
| Approximate Weight | 4.5 kg |
Frequently Asked Questions
Is the panel orientation vertical on 6FC5370-8AA20-0AA0?
Yes, it is the vertical PPU 280.2 configuration.
Which DC supply should be prepared for 6FC5370-8AA20-0AA0?
Use a regulated 24 V DC supply within the specified tolerance and power rating.
Can an S120 Combi power module operate with 6FC5370-8AA20-0AA0?
Yes, this PPU version is included in the approved control list for that drive platform.
What display format should the HMI project match on 6FC5370-8AA20-0AA0?
Use the documented 10.4-inch 800 × 600 pixel display format.
What enclosure protection applies after installing 6FC5370-8AA20-0AA0?
The closed front is rated IP65 and the rear section is rated IP20.
What must be backed up before replacing 6FC5370-8AA20-0AA0?
Preserve the CNC, PLC, drive and machine data together with the licensed system software.
Which identity checks are essential before ordering 6FC5370-8AA20-0AA0?
Match the complete article number, PPU generation, vertical layout and installed software license.
Compatibility & Ordering Notes
Compatibility Checklist
- Use only with a documented SINUMERIK 828D hardware configuration.
- Verify the licensed CompactFlash system software and CNC option set before exchange.
- Back up CNC, PLC, drive and machine data before removing the installed unit.
