Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6es7964 2aa01 0ab0 if964 dp interface module-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens SIMATIC S7-400 6ES7964-2AA01-0AB0 IF964-DP Interface Module

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Product Overview
  • Key Functions
  • Official Specifications
  • Frequently Asked Questions
  • Compatibility & Ordering Notes
  • Hot Selling Models
  • Recommended Products
Overview

SIEMENS SIMATIC S7-400 - PROFIBUS DP INTERFACE MODULE

6ES7964-2AA01-0AB0 IF964-DP Interface Module

Official Siemens identification and technical data for 6ES7964-2AA01-0AB0, prepared for accurate replacement matching and quotation.

At a Glance

Article Number 6ES7964-2AA01-0AB0
Manufacturer Siemens
Platform SIMATIC S7-400
Product Type IF964-DP Interface Module
Official Configuration IF964-DP plug-in interface module configured as a PROFIBUS DP master for SIMATIC S7-400

Exact Identification

Match the complete Siemens article number 6ES7964-2AA01-0AB0 and the installed hardware configuration.

Official Configuration

IF964-DP plug-in interface module configured as a PROFIBUS DP master for SIMATIC S7-400.

Connection Check

PROFIBUS DP master interface through the IF964-DP module connection.

Product Overview

6ES7964-2AA01-0AB0 is officially identified by Siemens as IF964-DP Interface Module DP Master in the SIMATIC S7-400 product range.

Siemens identifies this replacement IF964-DP interface module as a PROFIBUS DP master interface for SIMATIC S7-400.

Ordering focus: verify the complete 6ES7964-2AA01-0AB0 article number, installed hardware configuration, connections and Siemens system documentation before replacement.

Key Functions

Model-Specific Configuration

6ES7964-2AA01-0AB0: IF964-DP plug-in interface module configured as a PROFIBUS DP master for SIMATIC S7-400.

System Connection

PROFIBUS DP master interface through the IF964-DP module connection.

Replacement Control

Use the full 6ES7964-2AA01-0AB0 article number and official Siemens documentation to verify the installed configuration before replacement.

Official Specifications
Bus Connector 9-pin female D-sub
Physical Interface RS-485
Galvanic Isolation Provided
Transmission Rate 9.6 kbit/s to 12 Mbit/s
Maximum Number of Stations 125, depending on the CPU
Cable Length at 9.6 kbit/s Up to 1,200 m
Cable Length at 12 Mbit/s Up to 100 m
Module Power Source S7-400 CPU
P5ext Load Capacity Maximum 90 mA at isolated 5 V
P24 Load Capacity Maximum 150 mA at 24 V
PROFIBUS Data Lines LTG_A and LTG_B
Control Signal RTSAS request-to-send output
Reference and Functional Ground M24 and isolated M5ext
Module Identifier CH
Power Dissipation 1 W
Dimensions (W × H × D) 26 × 54 × 130 mm
Approximate Weight 0.065 kg

Official source: Siemens S7-400 CPU Specifications manual A5E00432658-01, IF 964-DP section.

Frequently Asked Questions

Which network does 6ES7964-2AA01-0AB0 add to an S7-400 CPU?

It provides an isolated RS-485 interface for connecting distributed I/O over PROFIBUS-DP.

How do baud rate and cable length relate for 6ES7964-2AA01-0AB0?

At 9.6 kbit/s the cable can be up to 1,200 m; at 12 Mbit/s the maximum point-to-point length is 100 m.

How many PROFIBUS stations can 6ES7964-2AA01-0AB0 support?

The network can be expanded to as many as 125 stations, subject to the capabilities of the installed CPU.

Can 6ES7964-2AA01-0AB0 be inserted or removed while the CPU is powered?

No. Installation and removal must be performed with power off; removing the interface while energized can place the CPU in DEFECT mode.

Which connector is used for 6ES7964-2AA01-0AB0 field wiring?

The front interface is a 9-pin female D-sub carrying the PROFIBUS data, control, reference and supply signals.

How is 6ES7964-2AA01-0AB0 powered, and what auxiliary loads are available?

Power is supplied by the S7-400 CPU; the isolated 5 V output supports up to 90 mA and the 24 V output up to 150 mA.

What installation footprint should be allowed for 6ES7964-2AA01-0AB0?

Allow 26 × 54 × 130 mm for the module; its approximate weight is 0.065 kg.

Compatibility & Ordering Notes
Before ordering 6ES7964-2AA01-0AB0: compare the complete article number, official configuration, system connections and required Siemens accessories with the installed unit and documentation.

Compatibility Checklist for 6ES7964-2AA01-0AB0

  • Match the complete 6ES7964-2AA01-0AB0 article number without shortening the suffix.
  • Confirm compatibility with the installed SIMATIC S7-400 product range.
  • Verify IF964-DP plug-in interface module configured as a PROFIBUS DP master for SIMATIC S7-400.
  • Confirm PROFIBUS DP master interface through the IF964-DP module connection.
Hot Selling Models
UM45-2FLK13/AB-1756
IHRT46B/4D
CP037-01
VLC-1600
ABB DC523 A0 1SAP 440500R0001
N500W
X12110314-1ABS
ICM-4
ABB 2CL0813072
2CDG110040R0011
EV002
DCA/4-20MA/DH1L1/117AC
SLS46C-40.K48-M12
IMDSI02
2201-29400-001

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.