Siemens SIMATIC S7-400 6ES7964-2AA01-0AB0 IF964-DP Interface Module
Fabricator: Siemens
Condición: Nuevo
Plazo de Entrega: En Stock
Origo: Germania
Garantía: 12 Meses
Inscriptio electronica: [email protected]
whatsapp: +86-18150117685
- Conspectus
- Product Overview
- Key Functions
- Official Specifications
- Quaestiones Frequenter Rogatae
- Compatibility & Ordering Notes
- Hot Selling Models
- Producta commendata
Conspectus
SIEMENS SIMATIC S7-400 - PROFIBUS DP INTERFACE MODULE
6ES7964-2AA01-0AB0 IF964-DP Interface Module
Official Siemens identification and technical data for 6ES7964-2AA01-0AB0, prepared for accurate replacement matching and quotation.
Ad Primum Aspectum
| Numerus Articuli | 6ES7964-2AA01-0AB0 |
| Fabricator | Siemens |
| Platform | SIMATIC S7-400 |
| Typus Producti | IF964-DP Interface Module |
| Configuratio Officialis | IF964-DP plug-in interface module configured as a PROFIBUS DP master for SIMATIC S7-400 |
Identificatio exacta.
Match the complete Siemens article number 6ES7964-2AA01-0AB0 and the installed hardware configuration.
Configuratio Officialis
IF964-DP plug-in interface module configured as a PROFIBUS DP master for SIMATIC S7-400.
Examinatio connexionis
PROFIBUS DP master interface through the IF964-DP module connection.
Product Overview
6ES7964-2AA01-0AB0 is officially identified by Siemens as IF964-DP Interface Module DP Master in the SIMATIC S7-400 product range.
Siemens identifies this replacement IF964-DP interface module as a PROFIBUS DP master interface for SIMATIC S7-400.
Focus ordinandi: verify the complete 6ES7964-2AA01-0AB0 article number, installed hardware configuration, connections and Siemens system documentation before replacement.
Key Functions
Configuratio speciei specifica
6ES7964-2AA01-0AB0: IF964-DP plug-in interface module configured as a PROFIBUS DP master for SIMATIC S7-400.
Conexio del sistema
PROFIBUS DP master interface through the IF964-DP module connection.
Substitutio controlis
Use the full 6ES7964-2AA01-0AB0 article number and official Siemens documentation to verify the installed configuration before replacement.
Official Specifications
| Conector Bus | 9-pin feminin D-sub |
| Interfacing Physica | RS-485 |
| Isolatio galvanica | Praebitum |
| Transmissio rate | 9,6 kbit/s ad 12 Mbit/s |
| Numerus Maximus Stationum | 125, secundum CPU |
| Longitudo Cavi ad 9,6 kbit/s | Usque ad 1200 m |
| Longitudo Cavi ad 12 Mbit/s | Usque ad 100 m |
| Fons Potentiae Moduli | S7-400 CPU |
| Capacitas Onus P5ext | Maxime 90 mA ad isolatum 5 V |
| Capacitas Onus P24 | Maximum 150 mA ad 24 V |
| Lineae dati PROFIBUS | LTG_A et LTG_B |
| Imperium signum | Exitus petitionis ad mittendum RTSAS |
| Terra referentiae et functionis | M24 et M5ext isolatum |
| Identificator moduli | En |
| Dispergo Potentiam | 1 W |
| Dimensiones (L × H × D) | 26 × 54 × 130 mm |
| Pondus Approximatum | 0.065 kg |
Fons officialis: Manuale specificarum Siemens S7-400 CPU A5E00432658-01, sectio IF 964-DP.
Quaestiones Frequenter Rogatae
Ad quam rete 6ES7964-2AA01-0AB0 addit ad CPU S7-400?
It provides an isolated RS-485 interface for connecting distributed I/O over PROFIBUS-DP.
How do baud rate and cable length relate for 6ES7964-2AA01-0AB0?
At 9.6 kbit/s the cable can be up to 1,200 m; at 12 Mbit/s the maximum point-to-point length is 100 m.
How many PROFIBUS stations can 6ES7964-2AA01-0AB0 support?
The network can be expanded to as many as 125 stations, subject to the capabilities of the installed CPU.
Can 6ES7964-2AA01-0AB0 be inserted or removed while the CPU is powered?
No. Installation and removal must be performed with power off; removing the interface while energized can place the CPU in DEFECT mode.
Which connector is used for 6ES7964-2AA01-0AB0 field wiring?
The front interface is a 9-pin female D-sub carrying the PROFIBUS data, control, reference and supply signals.
How is 6ES7964-2AA01-0AB0 powered, and what auxiliary loads are available?
Potentia ab CPU S7-400 suppeditatur; outputus isolatus 5 V usque ad 90 mA, et outputus 24 V usque ad 150 mA sustinet.
Quod spatium installationis pro 6ES7964-2AA01-0AB0 concedendum est?
Spatium 26 × 54 × 130 mm pro modulo concedendum est; pondus eius approximatum est 0.065 kg.
Compatibility & Ordering Notes
Index compatibilitatis pro 6ES7964-2AA01-0AB0
- Numerum articuli 6ES7964-2AA01-0AB0 integrum adaequare, sine abbreviatione suffixi.
- Confirma compatibilitatem cum intervallo productorum SIMATIC S7-400 installatorum.
- Verificare modulum interfaciei IF964-DP insertum ut magister PROFIBUS DP pro SIMATIC S7-400.
- Confirmare interfaciem magistri PROFIBUS DP per connexionem moduli IF964-DP.