Siemens SIMATIC S7-300 6ES7951-1KM00-0AA0 4 MB Memory Card
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
Siemens · SIMATIC S7-300
6ES7951-1KM00-0AA0 4 MB Memory Card
Siemens 6ES7951-1KM00-0AA0 is a short-format 5 V Flash EPROM memory card with four megabytes of capacity for compatible SIMATIC S7-300 central processing units.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7951-1KM00-0AA0 |
| Product Type | PLC memory accessory |
| Core Function | Extends CPU load-memory capacity and carries user program data |
| Application or Compatible Series | Selected SIMATIC S7-300 CPUs |
CPU Compatibility
Verify the installed CPU order number and hardware generation against the official memory-card table.
Program Integrity
Back up the project and confirm the replacement card contains the intended program and parameters.
Power-Off Handling
Switch off the controller before removing or inserting the card.
Product Overview
Siemens 6ES7951-1KM00-0AA0 is a short-format 5 V Flash EPROM memory card with four megabytes of capacity for compatible SIMATIC S7-300 central processing units.
Flash EPROM retains the user program and CPU-related parameters without a backup battery. Four megabytes of card capacity extend the load memory of supported S7-300 CPUs. Supported CPUs can load the user program, copy RAM to ROM and preserve service data on the card.
Key Functions
Nonvolatile Program Storage
Flash EPROM retains the user program and CPU-related parameters without a backup battery.
Load-Memory Expansion
Four megabytes of card capacity extend the load memory of supported S7-300 CPUs.
CPU Service Operations
Supported CPUs can load the user program, copy RAM to ROM and preserve service data on the card.
Official Specifications
| Memory Technology | Flash EPROM / FEPROM |
|---|---|
| Rated Voltage | 5 V |
| Storage Capacity | 4 MB |
| Data Width | 16 bit |
| Mechanical Format | Short design |
| Stored User Data | User program |
| Stored System Data | Parameters that determine CPU and module response |
| Power-Off Retention | No backup battery required when the program is stored on the card |
| Supported CPU Operation | Copy RAM to ROM |
| Program Loading Operation | Load User Program |
| Firmware Backup Scope | CPU firmware or operating-system backup, except the documented CPU 318-2 case |
| Product Net Weight | 0.032 kg |
Frequently Asked Questions
Is 6ES7951-1KM00-0AA0 a Micro Memory Card?
No, it is a traditional short-format five-volt S7-300 Flash EPROM card.
How much data can 6ES7951-1KM00-0AA0 store?
The card provides four megabytes of nonvolatile storage.
Can 6ES7951-1KM00-0AA0 retain the user program without a battery?
Yes, a program stored in the Flash EPROM remains available without backup-battery support.
Which CPU family should I check before using 6ES7951-1KM00-0AA0?
Verify the exact installed S7-300 CPU against the official memory-card compatibility table.
Should I power down before changing 6ES7951-1KM00-0AA0?
Yes, switch off the controller before removing or inserting the memory card.
Can 6ES7951-1KM00-0AA0 be used for Copy RAM to ROM?
Compatible CPUs support copying the RAM contents into the nonvolatile card memory.
How should I prepare project data before exchanging 6ES7951-1KM00-0AA0?
Back up the complete project and verify that the replacement card carries the intended program and parameters.
Compatibility & Ordering Notes
Compatibility Checklist
- The official table includes the CPU 315-2 base order number 6ES7315-2AF03 among compatible processors.
- Do not substitute a SIMATIC Micro Memory Card or an S7-400 long-format memory card.
- Power down the controller and preserve the complete project before exchanging the card.