Siemens 6ES7921-5CK20-0AA0 TOP connect Analog Front Connector
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Romania
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Use the single 50-pole IDC cable interface for the analog cabling arrangement.
- Keep the front-to-terminal cable route within 30 m.
- Limit current to 1 A per plug contact and DC voltage to 60 V maximum.
- Maintain the specified 0 to +60 °C operating environment.
6ES7921-5CK20-0AA0 TOP connect Analog Front Connector
A 40-pole analog front-connector module with one 50-pole IDC system-cable interface and potential supply through the module infeed element.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7921-5CK20-0AA0 |
| Product Type | Analog front-connector module |
| Core Function | System-cable termination of analog I/O |
| Application | S7-1500 cabinet interconnection |
Analog connection
One 50-pole IDC system-cable connection serves the analog interconnection.
Module infeed
Potential supply is fed through the infeed element of the module.
Cabinet reach
Supports up to 30 m between the front connector and terminal module.
Product Overview
6ES7921-5CK20-0AA0 connects S7-1500 analog I/O to the SIMATIC TOP connect system-cabling arrangement. The module combines a 40-pole front connection with one 50-pole IDC interface for the corresponding system cable.
Potential supply enters through the module’s infeed element, making the supply path a key part of connector selection. The connector mounts directly and supports a maximum 30 m cable route to the terminal module.
Key Functions
Concentrate analog wiring
The 40-pole front connection interfaces with a single 50-pole IDC system-cable connection for analog I/O cabling.
Feed module potentials
The potential supply uses the module infeed element, so the infeed arrangement must be coordinated with the target I/O module.
Link remote terminal wiring
The system cable can connect a front-connector module and a terminal module over a route of up to 30 m.
Official Specifications
| Module-side connection | 40 poles |
|---|---|
| System-cable connection | 1 × 50-pole IDC connector |
| Rated and maximum DC voltage | 24 V DC rated; 60 V DC maximum |
| Maximum current per plug contact | 1 A |
| Maximum system-cable length | 30 m between front connector and terminal module |
| Potential supply path | Through the module infeed element |
| Terminal position | Top |
| Screwdriver blade width | 3.5 mm |
| Overvoltage category and pollution degree | Category II; pollution degree 2 |
| Operating temperature | 0 to +60 °C |
| Storage temperature | −40 to +70 °C |
| Mounting and housing | Direct mounting; black, non-transparent housing |
| Net weight | 99 g |
Frequently Asked Questions
Can 6ES7921-5CK20-0AA0 be used with a four-plug digital TOP connect cable arrangement?
This analog connector has one 50-pole IDC system-cable connection rather than four 16-pole IDC connections.
Where does the potential supply enter 6ES7921-5CK20-0AA0?
The potential supply is fed through the infeed element of the I/O module.
What is the longest route from 6ES7921-5CK20-0AA0 to a terminal module?
The maximum cable length between the front-connector module and terminal module is 30 m.
Can I carry 2 A through one plug contact on 6ES7921-5CK20-0AA0?
Each plug contact is limited to a maximum current of 1 A.
Can 6ES7921-5CK20-0AA0 be used in a 48 V DC circuit?
The maximum permitted DC voltage is 60 V, while the rated DC voltage is 24 V.
Will 6ES7921-5CK20-0AA0 need an additional end cover after mounting?
The connector mounts directly and does not require an end cover.
What temperature range should the cabinet maintain for 6ES7921-5CK20-0AA0?
Keep the operating temperature between 0 and +60 °C.