Siemens SIMATIC PCS 7 ET 200PA SMART 6ES7650-8EK80-1AA0 DO32 24 V DC 0.5 A Coated Output Module

Overview

SIEMENS · SIMATIC PCS 7 ET 200PA SMART

6ES7650-8EK80-1AA0 DO32 24 V DC 0.5 A Coated Output Module

The 6ES7650-8EK80-1AA0 is a SIMATIC PCS 7 ET 200PA SMART digital output module with thirty-two 24 V DC, 0.5 A outputs and a protective conformal coating.

At a Glance

Brand	Siemens
Model	6ES7650-8EK80-1AA0
Product Type	Thirty-two-channel conformal-coated digital output module
Core Function	Switches thirty-two 24 V DC field outputs at up to 0.5 A per channel
Application or Compatible Series	SIMATIC PCS 7 ET 200PA SMART process I/O stations

Exact Identification

Match 6ES7650-8EK80-1AA0 character by character before replacement.

Interface Check

Confirm the installed supply, terminals, network and field wiring.

Project Backup

Preserve the validated configuration and application data before exchange.

Product Overview

The 6ES7650-8EK80-1AA0 is a SIMATIC PCS 7 ET 200PA SMART digital output module with thirty-two 24 V DC, 0.5 A outputs and a protective conformal coating.

Thirty-two channels provide compact actuator control in process I/O stations. Each output is rated for a 0.5 A DC load within the module group limits. The coated version is intended for the documented environmental classes of the ET 200PA SMART system.

Ordering focus: confirm the 1AA0 coated version, 32-channel layout, 24 V DC loads, terminal assignment and PCS 7 project.

Key Functions

High-Density Digital Output

Thirty-two channels provide compact actuator control in process I/O stations.

24 V DC Field Switching

Each output is rated for a 0.5 A DC load within the module group limits.

Conformal-Coated Construction

The coated version is intended for the documented environmental classes of the ET 200PA SMART system.

Official Specifications

Module Designation	DO32
Digital Output Channels	32
Rated Load Voltage	24 V DC
Rated Output Current	0.5 A per channel
Output Type	Electronic digital outputs
Protective Coating	Conformal-coated version
System Platform	SIMATIC PCS 7 ET 200PA SMART
Process Signal Direction	Output
Channel Density	32 output points per module
Field Load Category	24 V DC industrial actuators
Station Integration	ET 200PA SMART signal module
Commissioning Basis	PCS 7 hardware configuration and channel assignment

Official source:Siemens technical data for 6ES7650-8EK80-1AA0.

Frequently Asked Questions

How many field outputs are provided by 6ES7650-8EK80-1AA0?

The module provides thirty-two electronic digital output channels.

Which load supply is required for 6ES7650-8EK80-1AA0?

Use the 24 V DC field supply and protection defined by the station wiring design.

What current is available per channel on 6ES7650-8EK80-1AA0?

Each channel is rated for up to 0.5 A within the documented module limits.

Why is 6ES7650-8EK80-1AA0 identified as a coated version?

A protective conformal coating supports use in the environmental conditions released for this hardware.

What should be retained before exchanging 6ES7650-8EK80-1AA0?

Save the PCS 7 hardware configuration, channel map, supply grouping and actuator assignments.

Which loads should be checked before wiring 6ES7650-8EK80-1AA0?

Verify every actuator voltage, steady-state current, inrush behavior and suppression circuit.

What must be tested after installing 6ES7650-8EK80-1AA0?

Command every output, verify feedback and confirm that no station or channel diagnostics remain active.

Compatibility & Ordering Notes

Before ordering 6ES7650-8EK80-1AA0: confirm the 1AA0 coated version, 32-channel layout, 24 V DC loads, terminal assignment and PCS 7 project.

Compatibility Checklist

• Use the module only in an approved ET 200PA SMART station configuration.
• Keep each actuator within the documented channel and group loading.
• Restore the channel map and validate every output before process release.

Hot Selling Models