Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6es7650 8bk60 0aa0 et 200pa smart ao 8x12 bit-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens SIMATIC PCS 7 ET 200PA SMART AO 8x12 Bit 6ES7650-8BK60-0AA0

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Product Overview
  • Key Functions
  • Official Specifications
  • Frequently Asked Questions
  • Compatibility & Ordering Notes
  • Hot Selling Models
  • Recommended Products
Overview

Siemens · SIMATIC PCS 7 ET 200PA SMART

6ES7650-8BK60-0AA0 SIMATIC PCS 7 ET 200PA SMART AO 8x12 Bit Analog Output Module

The Siemens ET 200PA SMART AO 8x12 Bit module provides eight isolated analog outputs for voltage or current control signals in process automation systems.

At a Glance

Brand Siemens
Model 6ES7650-8BK60-0AA0
Product Type Eight-channel isolated analog output module
Core Function Generates configurable voltage or current signals for eight process output channels, including HART current operation
Application or Compatible Series ET 200PA SMART distributed I/O stations equipped with an IM 650-8PH interface module

Exact Identification

Match the complete article number and the AO 8x12 Bit designation before replacing an installed module.

Signal Configuration

Confirm every channel range, load type and two-wire or four-wire field connection before commissioning.

Station Compatibility

Use the module in an ET 200PA SMART station with the required IM 650-8PH interface module.

Product Overview

The Siemens ET 200PA SMART AO 8x12 Bit module provides eight isolated analog outputs for voltage or current control signals in process automation systems.

Eight channels in one group can be assigned to the specified voltage or current ranges for process actuators. Current outputs are HART-compliant, while configurable diagnostics and diagnostic interrupts support maintenance. The module provides galvanic isolation from the backplane and load supply with selectable redundancy for current outputs.

Ordering focus: confirm the full article number, IM 650-8PH station interface, channel signal ranges, HART use, load limits, connector wiring and redundancy setting.
Key Functions

Eight Configurable Outputs

Eight channels in one group can be assigned to the specified voltage or current ranges for process actuators.

HART and Diagnostics

Current outputs are HART-compliant, while configurable diagnostics and diagnostic interrupts support maintenance.

Process-Ready Electrical Design

The module provides galvanic isolation from the backplane and load supply with selectable redundancy for current outputs.

Official Specifications
Output Channels 8 channels in one group
Current Output Ranges 0 to 20 mA; 4 to 20 mA; ±20 mA
Voltage Output Ranges 1 to 5 V; 0 to 10 V; ±10 V
Digital Resolution 12 bit; 11 bit plus sign for bipolar ranges and selected unipolar ranges
HART Operation HART-compliant on current outputs
Maximum Conversion Time per Channel 0.8 ms
Rated Load Voltage 24 V DC with reverse-polarity protection
Maximum Backplane Current 100 mA
Maximum L+ Supply Current 340 mA
Typical Power Loss 6.0 W
Maximum Shielded Cable Length 200 m
Voltage Output Load Minimum 1 kΩ; maximum capacitive load 1 µF
Current Output Load Maximum 500 Ω; maximum inductive load 10 mH
Maximum Voltage Short-Circuit Current 25 mA
Maximum Current No-Load Voltage 18 V
Isolation Test Voltage 500 V DC
Redundant Operation Available for current output with identical modules
Front Connector 40-pole; four-wire voltage and two-wire current connections
Dimensions (W × H × D) 40 × 125 × 117 mm
Approximate Weight 272 g
Frequently Asked Questions

Which station interface is required for 6ES7650-8BK60-0AA0?

Install it in an ET 200PA SMART station that uses the IM 650-8PH interface module.

Can 6ES7650-8BK60-0AA0 provide both voltage and current outputs?

Each channel can be configured for one of the specified voltage or current ranges.

Does 6ES7650-8BK60-0AA0 support HART devices?

HART communication is available when a channel is operated as a current output.

How should loads be checked before connecting 6ES7650-8BK60-0AA0?

Verify that resistance, capacitance and inductance remain within the limits for the selected output type.

Can 6ES7650-8BK60-0AA0 be used in a redundant output arrangement?

Redundant operation is available for current outputs when two identical modules are configured together.

What wiring format applies to 6ES7650-8BK60-0AA0?

Use the 40-pole front connector with four-wire voltage connections or two-wire current connections as required.

What should be restored after replacing 6ES7650-8BK60-0AA0?

Restore the channel ranges, diagnostics, HART settings, addresses and field wiring assignments before returning the station to service.

Compatibility & Ordering Notes
Before ordering 6ES7650-8BK60-0AA0: confirm the full article number, IM 650-8PH station interface, channel signal ranges, HART use, load limits, connector wiring and redundancy setting.

Compatibility Checklist

  • Confirm the installed station is an ET 200PA SMART system with an IM 650-8PH interface module.
  • Match every field load to the configured voltage or current range and permitted electrical limits.
  • Restore the original channel parameters, diagnostics, addresses and HART settings before process commissioning.
Hot Selling Models
LRD21 LAD7B106
3RT1023-1BB40 3RT1936-1TR00
NEBA-M8G3-U-5-N-M8G3
3RH2262-1BB40
ADN-16-30-APA
3RF2330-1AA45
Allen Bradley 100-C12Z*10
3RT2015-2FB41
3SE2200-1DV00-0AC4
3RV2011-1DA25
200PRO 6ES7194-4CA00-0AA0
3RV2011-1BA20 3RV2901-2F
E2A3-M18KS11-M1-B2
3RT1024-1BB4 3RH1921-1HA13
3RT2016-1BB41 3RT2916-1BB00

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.