Siemens 6ES7492-1CL00-0AA0 SIMATIC S7-400 48-Pole Crimp Front Connector
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Use the connector with a compatible S7-400 signal or function module.
- Distinguish this crimp version from the screw and spring-terminal articles.
- Select 0.5–1.5 mm² flexible conductors without wire-end ferrules.
- Use the specified crimp contacts and tool with an approximately 5 mm stripping length.
- Insert the contacts in the correct module pin positions and retain the coding arrangement.
- Match the individual-unit article to the desired quantity rather than the separate 84-unit pack article.
6ES7492-1CL00-0AA0 SIMATIC S7-400 48-Pole Crimp Front Connector
A 48-pole crimp-contact front connector that retains the field wiring during module replacement and uses mechanical coding to reduce incorrect insertion.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7492-1CL00-0AA0 |
| Product Type | Front wiring connector |
| Core Function | Connecting field wiring to the module interface |
| Application | Compatible S7-400 signal and function modules |
Crimp-wire assembly
Prepare the conductors and fit separate crimp contacts before insertion.
Reusable field wiring
The wired connector is retained when the associated module is replaced.
Matching accessories
Use the listed 6XX3070 contacts and 6XX3071 crimping tool.
Product Overview
6ES7492-1CL00-0AA0 provides the 48-pole crimp-contact wiring interface for compatible S7-400 signal and function modules.
The removable connector keeps the sensor and actuator wiring together during module replacement, with coding to prevent an incorrect module connection.
Key Functions
Assemble the field wires with crimp contacts
Strip the flexible conductors by approximately 5 mm, crimp the contacts onto them and insert the contacts into the housing recesses from the bottom upward.
Preserve the wired connector for replacement
The front connector separates the field-wiring assembly from the module so the wiring can be retained during a module change.
Use connector coding for the correct module match
The coding arrangement helps prevent the connector from being fitted to the wrong module type during maintenance.
Official Specifications
| Contact Positions | 48 poles |
|---|---|
| Wire-Termination Method | Crimp contacts |
| Flexible Conductor Cross-Section | 0.5–1.5 mm², without wire-end ferrules |
| Conductor Stripping Length | Approximately 5 mm |
| Conductor Occupancy | 1 conductor per crimp terminal |
| Approximate Weight | 159 g |
Frequently Asked Questions
Which contacts should I order to wire 6ES7492-1CL00-0AA0?
The listed crimp-contact accessory is 6XX3070, supplied as a package of 250 contacts.
Which crimping tool is listed for assembling 6ES7492-1CL00-0AA0?
The listed tool for the crimp contacts is 6XX3071.
How far should I strip each conductor before crimping it for 6ES7492-1CL00-0AA0?
Strip approximately 5 mm of insulation before fitting the crimp contact.
Do I fit wire-end ferrules to conductors going into 6ES7492-1CL00-0AA0?
The crimp connection uses flexible conductors without wire-end ferrules and separate crimp contacts.
Where should I start when inserting the wired contacts into 6ES7492-1CL00-0AA0?
Insert the contacts into the housing recesses starting at the bottom.
Will changing a signal module require me to recreate all wiring on 6ES7492-1CL00-0AA0?
The removable front connector allows the field wiring to be retained during module replacement.
Why should I preserve the coding when transferring 6ES7492-1CL00-0AA0 during maintenance?
The connector coding helps prevent incorrect module connections.